材料热处理学报

[1] 冯继宇，张展展，吴科君，等.WC-TiC-VC-Fe硬质合金的显微组织及热震性能[J].材料热处理学报，2024,45(4):20-28.FENG Ji-yu,ZHANG Zhan-zhan,WU Ke-jun,et al.Microstructure and themral shock properties of WC-TiC-VC-Fe cemented carbides[J].Transactions of Materials and Heat Treatment,2024,45(4):20-28.

[2] García J,Ciprés V C,Blomqvist A,et al.Cemented carbide microstructures:A review[J].International Journal of Refractory Metals and Hard Materials,2019,80:40-68.

[3] Chen C,Huang B,Liu Z,et al.Additive manufacturing of WC-Co cemented carbides:Process,microstructure,and mechanical properties[J].Additive Manufacturing,2023,63:103410.

[4] Kellner F,Hildebrand H,Virtanen S.Effect of WC grain size on the corrosion behavior of WC-Co based hardmetals in alkaline solutions[J].International Journal of Refractory Metals and Hard Materials,2009,27(4):806-812.

[5] Hochstrasser-kurz S,Reiss D,Suter T,et al.ICP-MS,SKPFM,XPS,and microcapillary investigation of the local corrosion mechanisms of WC-Co hardmetal[J].Journal of the Electrochemical Society,2008,155(8):C415.

[6] 魏修宇，金鹏，夏艳萍，等.WC-Co-(Ni)-(Cr)硬质合金在中性溶液中的腐蚀行为[J].稀有金属材料与工程，2020,49(1):313-319.WEI Xiu-yu,JIN Peng,XIA Yan-ping,et al.Corrosion behavior of WC-Co-(Ni)-(Cr) cemented carbide in neutral solution[J].Rare Metal Materials and Engineering,2020,49(1):313-319.

[7] 万庆磊，张立，王喆，等.WC-Co合金在不同介质中的电化学腐蚀行为与腐蚀机理研究[J].硬质合金，2014,31(4):201-208.WAN Qing-lei,ZHANG Li,WANG Zhe,et al.Electrochemical corrosion behaviors and corrosion mechanism of WC-Co cemented carbide in different aggressive mediums[J].Cemented Carbides,2014,31(4):201-208.

[8] Hurd A J,Kelley R L,Eggert R G,et al.Energy-critical elements for sustainable development[J].MRS Bulletin,2012,37(4):405-410.

[9] Chang S H,Chen S L.Characterization and properties of sintered WC-Co and WC-Ni-Fe hard metal alloys[J].Journal of Alloys and Compounds,2014,585:407-413.

[10] Konadu D,Van Der Merwe J,Potgieter J,et al.The corrosion behaviour of WC-VC-Co hardmetals in acidic media[J].Corrosion Science,2010,52(9):3118-3125.

[11] Fernandes C,Vilhena L,Pinho C,et al.Mechanical characterization of WC-10 wt% AISI 304 cemented carbides[J].Materials Science and Engineering A,2014,618:629-636.

[12] Deng J,Zhou Z.Fabrication,tensile,and hardness properties of novel cast WC-reinforced 304 stainless steel composites[J].JOM,2023,75(4):1294-1305.

[13] Oliveira A,Bastos A,Fernandes C,et al.Corrosion behaviour of WC-10% AISI 304 cemented carbides[J].Corrosion Science,2015,100:322-331.

[14] Han B,Dong W,Fan B,et al.Comparison on the immersion corrosion and electrochemical corrosion resistance of WC-Al2O3 composites and WC-Co cemented carbide in NaCl solution[J].RSC Advances,2021,11(36):22495-22507.

[15] 吴苗苗，李敬花，谢婉珊，等.水在TiO2表面吸附的第一性原理研究进展[J].山东工业技术，2018(12):220.WU Miao-miao,LI Jing-hua,XIE Wan-shan,et al.Advances in first-principles research on water adsorption on TiO2 surfaces[J].Journal of Shandong Industrial Technology,2018(12):220.

[16] Wu K,Zhang Z,Liao H,et al.First principles calculation of interfacial stability,electronic and mechanical properties of WC-304 cemented carbides[J].International Journal of Refractory Metals and Hard Materials,2023,117:106407.

[17] Fernandes C,Senos A,Vieira M.Control of eta carbide formation in tungsten carbide powders sputter-coated with (Fe/Ni/Cr)[J].International Journal of Refractory Metals and Hard Materials,2007,25(4):310-317.

[18] Kumar A N,Watabe M,Kurokawa K.The influence of Si on the microstructure and sintering behavior of ultrafine WC[J].Philosophical Magazine,2012,92(32):3950-3967.

[19] Gille G,Szesny B,Dreyer K,et al.Submicron and ultrafine grained hardmetals for microdrills and metal cutting inserts[J].International Journal of Refractory Metals and Hard Materials,2002,20(1):3-22.

[20] 罗鑫，洪源昆，吴佳逸，等.超细硬质合金WC晶粒大小对其摩擦磨损性能的影响[J].稀有金属与硬质合金，2022,50(3):93-97.LUO Xin,HONG Yuan-kun,WU Jia-yi,et al.Effect of WC grain size of ultrafine WC-Co cemented carbide on its friction and wear properties[J].Rare Metals and Cemented Carbides,2022,50(3):93-97.

[21] Yang X,Li X,Yang Q,et al.Effects of WC on microstructure and corrosion resistance of directional structure Ni60 coatings[J].Surface and Coatings Technology,2020,385:125359.

[22] 韩彬，董威威，骆祎岚，等.金属元素对WC-Al2O3复合材料在NaCl溶液中腐蚀行为的影响研究[J].稀有金属与硬质合金，2022,50(6):33-40.HAN Bin,DONH Wei-wei,LUO Yi-lan,et al.Effect of metal elements on corrosion behavior of WC-Al2O3 composite in NaCl solution[J].Rare Metals and Cemented Carbides,2022,50(6):33-40.

[23] Tang W,Zhang L,Chen Y,et al.Corrosion and strength degradation behaviors of binderless WC material and WC-Co hardmetal in alkaline solution:A comparative investigation[J].International Journal of Refractory Metals and Hard Materials,2017,68:1-8.

[24] 姚庆春，原一高，张建国.WC-10%CoCrFeNi硬质合金的磨损与腐蚀性能[J].东华大学学报(自然科学版),2024,50(2):95-101.YAO Qing-chun,YUAN Yi-gao,ZHANG Jian-guo.Wear and corrosion properties of WC-10%CoCrFeNi cemented carbide[J].Journal of Donghua University(Natural Science),2024,50(2):95-101.

[25] Santos R,Rocha A F,Bastos A,et al.The effect of Cr content on the corrosion resistance of WC-Ni-Cr-Mo composites[J].International Journal of Refractory Metals and Hard Materials,2021,95:105434.

[26] 雷超.水分子在稀土元素掺杂铁表面的吸附研究[C]//第十四届中国钢铁年会，中国重庆，2023:251-256.

[27] Steinlechner R,De Oro Calderon R,Koch T,et al.A study on WC-Ni cemented carbides:Constitution,alloy compositions and properties,including corrosion behaviour[J].International Journal of Refractory Metals and Hard Materials,2022,103:105750.

[28] 宋智博，叶榕伟，邹港，等.车轮钢ER8在中性NaCl溶液中的电化学腐蚀行为[J].材料保护，2024,57(2):76-83.SONG Zhi-bo,YE Rong-wei,ZOU Gang,et al.Eectrochemical corrosion behavior of ER8 wheel steel in neutral NaCl solution[J].Materials Protection,2024,57(2):76-83.

[29] Tomlinson W,Ayerst N.Anodic polarization and corrosion of WC-Co hardmetals containing small amounts of Cr3C2 and/or VC[J].Journal of Materials Science,1989,24:2348-2352.

[30] 赵岁春，刘宁，陈爱华.TiC对WC-13Co细晶粒硬质合金组织和性能的影响[J].材料热处理学报，2018,39(1):45-50.ZHAO Sui-chun,LIU Ning,CHEN Ai-hua.Effect of titanium carbide on microstructure and properties of fine grain[J].Transactions of Materials and Heat Treatment,2018,39(1):45-50.