材料热处理学报

参考文献

[1] Yeh J W,Chen S K,Lin S J,et al.Nanostructured high-entropy alloys with multiple principal elements:Novel alloy design concepts and outcomes[J].Advanced Engineering Materials,2004,6(5):299-303.

[2] Cahn R W,Haasen P.Physical Metallurgy[M].Amsteram:North-Holland,1996:315-317.

[3] Zhang Y,Zuo T T,Tang Z,et al.Microstructures and properties of high-entropy alloys[J].Progress in Materials Science,2014,61:1-93.

[4] Zhang M D,Zhang L J,Fan J T,et al.Novel Co-free CrFeNiNb0.1Ti high-entropy alloys with ultra high hardness and strength[J].Materials Science and Engineering A,2019,764:138212.

[5] Yang X G,Zhou Y,Xi S Q,et al.Additively manufactured fine grained Ni6Cr4WFe9Ti high entropy alloys with high strength and ductility[J].Materials Science and Engineering A,2019,767:138394.

[6] Batchelor T A A,Pedersen J K,Winther S H,et al.High-entropy alloys as a discovery platform for electrocatalysis[J].Joule,2019,3(3):834-845.

[7] El-Atwani O,Li N,Li M,et al.Outstanding radiation resistance of tungsten-based high-entropy alloys[J].Science Advances,2019,5(3):v2002.

[8] Mizutani U.Hume-Rothery Rules for Structurally Complex Alloy[M].Boca Raton:CRC Press,2010:144-147.

[9] Wang Z J,Qiu W F,Yang Y,et al.Atomic-size and lattice-distortion effects in newly developed high-entropy alloys with multiple principal elements[J].Intermetallics,2015,64:63-69.

[10] Leong Z Y,Huang Y,Goodall R,et al.Electronegativity and enthalpy of mixing biplots for high entropy alloy solid solution prediction[J].Materials Chemistry and Physics,2018,210:259-268.

[11] Guo S,Ng C,Lu J,et al.Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys[J].Journal of Applied Physics,2011,109(10):103505.

[12] Otto F,Yang Y,Bei H,et al.Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys[J].Acta Materialia,2013,61(7):2628-2638.

[13] Zhang Y,Zhou Y J,Lin J P,et al.Solid-solution phase formation rules for multi-component alloys[J].Advanced Engineering Materials,2008,10(6):534-538.

[14] Yang X,Zhang Y.Prediction of high-entropy stabilized solid-solution in multi-component alloys[J].Materials Chemistry and Physics,2012,132(2):233-238.

[15] Song R,Ye F,Yang C X,et al.Effect of alloying elements on microstructure,mechanical and damping properties of Cr-Mn-Fe-V-Cu high-entropy alloys[J].Journal of Materials Science and Technology,2018,34(11):2014-2021.

[16] Jin X,Liang Y X,Bi J,et al.Non-monotonic variation of structural and tensile properties with Cr content in AlCoCrxFeNi2 high entropy alloys[J].Journal of Alloys and Compounds,2019,798:243-248.

[17] Chen Z,Chen W P,Wu B Y,et al.Effects of Co and Ti on microstructure and mechanical behavior of Al(0.75)FeNiCrCo high entropy alloy prepared by mechanical alloying and spark plasma sintering[J].Materials Science and Engineering A,2015,648:217-224.

[18] Jiang H,Jiang L,Qiao D X,et al.Effect of niobium on microstructure and properties of the CoCrFeNbxNi high entropy alloys[J].Journal of Materials Science and Technology,2017,33(7):712-717.

[19] Jiang H,Han K,Qiao D X,et al.Effects of Ta addition on the microstructures and mechanical properties of CoCrFeNi high entropy alloy[J].Materials Chemistry and Physics,2018,210:43-48.

[20] Hou L L,Hui J T,Yao Y H,et al.Effects of boron content on microstructure and mechanical properties of AlFeCoNiBx high entropy alloy prepared by vacuum arc melting[J].Vacuum,2019,164:212-218.

[21] Li Z M.Interstitial equiatomic CoCrFeMnNi high-entropy alloys:carbon content,microstructure,and compositional homogeneity effects on deformation behavior[J].Acta Materialia,2019,164:400-412.

[22] Fan J T,Zhang L J,Yu P F,et al.Improved the microstructure and mechanical properties of AlFeCoNi high-entropy alloy by carbon addition[J].Materials Science and Engineering A,2018,728:30-39.

[23] Jin B Q,Zhang N N,Guan S,et al.Microstructure and properties of laser re-melting FeCoCrNiAl0.5Six high-entropy alloy coatings[J].Surface and Coatings Technology,2018,349:867-873.

[24] Yin B L,Curtin W A.First-principles-based prediction of yield strength in the RhIrPdPtNiCu high-entropy alloy[J].Npj Computational Materials,2019,5(1):1-7.

[25] Singh P,Smirnov A V,Alam A,et al.First-principles prediction of incipient order in arbitrary high-entropy alloys:exemplified in Ti0.25CrFeNiAlx[J].Acta Materialia,2020,189:248-254.

[26] Yang S G,Lu J,Xing F Z,et al.Revisit the VEC rule in high entropy alloys (HEAs) with high-throughput CALPHAD approach and its applications for material design-A case study with Al-Co-Cr-Fe-Ni system[J].Acta Materialia,2020,192:11-19.

[27] Fourmont A,Le Gallet S,Politano O,et al.Effects of planetary ball milling on AlCoCrFeNi high entropy alloys prepared by spark plasma sintering:Experiments and molecular dynamics study[J].Journal of Alloys and Compounds,2020,820:153448.

[28] Rickman J M,Chan H M,Harmer M P,et al.Materials informatics for the screening of multi-principal elements and high-entropy alloys[J].Nature Communications,2019,10(1):2610-2618.

[29] Pei Z R,Yin J Q,Hawk J A,et al.Machine-learning informed prediction of high-entropy solid solution formation:Beyond the Hume-Rothery rules[J].Npj Computational Materials,2020,6(1):1-8.

[30] Wang G F,Liu Q,Yang J L,et al.Synthesis and thermal stability of a nanocrystalline MoNbTaTiV refractory high-entropy alloy via mechanical alloying[J].International Journal of Refractory Metals and Hard Materials,2019,84:104988.

[31] Alijani F,Reihanian M,Gheisari K.Study on phase formation in magnetic FeCoNiMnV high entropy alloy produced by mechanical alloying[J].Journal of Alloys and Compounds,2019,773:623-630.

[32] Ding P P,Mao A Q,Zhang X,et al.Preparation,characterization and properties of multicomponent AlCoCrFeNi2.1 powder by gas atomization method[J].Journal of Alloys and Compounds,2017,721:609-614.

[33] Lehtonen J,Ge Y,Ciftci N,et al.Phase structures of gas atomized equiatomic CrFeNiMn high entropy alloy powder[J].Journal of Alloys and Compounds,2020,827:154142.

[34] Dong Y,Gao X X,Lu Y P,et al.A multi-component AlCrFe2Ni2 alloy with excellent mechanical properties[J].Materials Letters,2016,169:62-64.

[35] Jiang H,Zhang H Z,Huang T D,et al.Microstructures and mechanical properties of Co2MoxNi2VWx eutectic high entropy alloys[J].Materials and Design,2016,109:539-546.

[36] Anand Sekhar R,Samal S,Nayan N,et al.Microstructure and mechanical properties of Ti-Al-Ni-Co-Fe based high entropy alloys prepared by powder metallurgy route[J].Journal of Alloys and Compounds,2019,787:123-132.

[37] Fu Z,Jiang L,Wardini J L,et al.A high-entropy alloy with hierarchical nanoprecipitates and ultrahigh strength[J].Science Advances,2018,4(10):t8712.

[38] Liang H,Gao B Y,Li Y N,et al.Microstructures and wear resistance of Al1.5CrFeNiTi0.5 and Al1.5CrFeNiTi0.5W0.5 high entropy alloy coatings manufactured by laser cladding[C]//Materials Science Forum,2019,154-159.

[39] Lin D Y,Zhang N N,He B,et al.Tribological properties of FeCoCrNiAlBx high-entropy alloys coating prepared by laser cladding[J].Journal of Iron and Steel Research International,2017,24(2):184-189.

[40] Feng X G,Tang G Z,Gu L,et al.Preparation and characterization of TaNbTiW multi-element alloy films[J].Applied Surface Science,2012,261:447-453.

[41] Zhang Y,Yan X H,Ma J,et al.Compositional gradient films constructed by sputtering in a multicomponent Ti-Al-(Cr,Fe,Ni) system[J].Journal of Materials Research,2018,33(19):3330-3338.

[42] Cao Y K,Liu Y,Liu B,et al.Effects of Al and Mo on high temperature oxidation behavior of refractory high entropy alloys[J].Transactions of Nonferrous Metals Society of China,2019,29(7):1476-1483.

[43] Wu Q F,Wang Z J,Zheng T,et al.A casting eutectic high entropy alloy with superior strength-ductility combination[J].Materials Letters,2019,253:268-271.

[44] Ge S F,Fu H M,Zhang L,et al.Effects of Al addition on the microstructures and properties of MoNbTaTiV refractory high entropy alloy[J].Materials Science and Engineering A,2020,784:139275.

[45] Larissa M G,Igor M,Milan O,et al.High-strength Al0.2Co1.5CrFeNi1.5Ti high-entropy alloy produced by powder metallurgy and casting:A comparison of microstructures,mechanical and tribological properties[J].Materials Characterization,2019,159:110046.

[46] Guo W M,Liu B,Liu Y,et al.Microstructures and mechanical properties of ductile NbTaTiV refractory high entropy[J].Journal of Alloys and Compounds,2019,776:428-436.

[47] Zhang C,Liu B,Liu Y,et al.Effects of annealing on microstructure and mechanical properties of metastable powder metallurgy CoCrFeNiMo0.2 high entropy alloy[J].Entropy,2019,21(5):448.

[48] Zhang L,Huo X F,Wang A G,et al.A ductile high entropy alloy strengthened by nano sigma phase[J].Intermetallics,2020,122:106813.

[49] Ye Y F,Wang Q,Lu J,et al.High-entropy alloy:challenges and prospects[J].Materials Today,2016,19(6):349-362.

[50] Lei Z F,Liu X,Wu Y,et al.Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes[J].Nature (London),2018,563(7732):546-550.

[51] Yang D N,Liu Y,Jiang H P,et al.A novel FeCrNiAlTi-based high entropy alloy strengthened by refined grains[J].Journal of Alloys and Compounds,2020,823:153729.

[52] Nguyen N T,Asghari-Rad P,Sathiyamoorthi P,et al.Ultrahigh high-strain-rate superplasticity in a nanostructured high-entropy alloy[J].Nature Communications,2020,11(1):1-7.

[53] Yang T,Zhao Y L,Li W P,et al.Ultrahigh-strength and ductile superlattice alloys with nanoscale disordered interfaces[J].Science.2020,369(6502):427-432.

[54] Xiao L L,Zheng Z Q,Guo S W,et al.Ultra-strong nanostructured CrMnFeCoNi high entropy alloys[J].Materials and Design,2020,194:108895.

[55] Gludovatz B,Hohenwarter A,Catoor D,et al.A fracture-resistant high-entropy alloy for cryogenic applications[J].Science,2014,345(6201):1153-1158.

[56] Zhang Y,Zhang M,Li D Y,et al.Compositional design of soft magnetic high entropy alloys by minimizing magnetostriction coefficient in (Fe0.3Co0.5Ni0.2)100-x(Al1/3Si2/3)x System[J].Metals,2019,9(3):382.

[57] Chen C,Zhang H,Fan Y Z,et al.A novel ultrafine-grained high entropy alloy with excellent combination of mechanical and soft magnetic properties[J].Journal of Magnetism and Magnetic Materials,2020,502:166513.

[58] Chen M,Lan L W,Shi X H,et al.The tribological properties of Al0.6CoCrFeNi high-entropy alloy with the σ phase precipitation at elevated temperature[J].Journal of Alloys and Compounds,2019,777:180-189.

[59] Zeng Q F,Xu Y T.A comparative study on the tribocorrosion behaviors of AlFeCrNiMo high entropy alloy coatings and 304 stainless steel[J].Materials Today Communications,2020,24:101261.

[60] Zhou Q Y,Sheikh S,Ou P,et al.Corrosion behavior of Hf0.5Nb0.5Ta0.5Ti1.5Zr refractory high-entropy in aqueous chloride solutions[J].Electrochemistry Communications,2019,98:63-68.

[61] Xiao D H,Zhou P F,Wu W Q,et al.Microstructure,mechanical and corrosion behaviors of AlCoCuFeNi-(Cr,Ti) high entropy alloys[J].Materials and Design,2017,116:438-447.

[62] Grewal H S,Sanjiv R M,Arora H S,et al.Activation energy and high temperature oxidation behavior of multi-principal element alloy[J].Advanced Engineering Materials,2017,19(11):1700182.

[63] Lu J,Chen Y,Zhang H,et al.Effect of Al content on the oxidation behavior of Y/Hf-doped AlCoCrFeNi high-entropy alloy[J].Corrosion Science,2020,170:108691.

[64] Lu Y P,Huang H F,Gao X Z,et al.A promising new class of irradiation tolerant materials:Ti2ZrHfV0.5Mo0.2 high-entropy alloy[J].Journal of Materials Science and Technology,2019,35(3):369-373.

[65] Chang S,Tseng K K,Yang T Y,et al.Irradiation-induced swelling and hardening in HfNbTaTiZr refractory high-entropy alloy[J].Materials Letters,2020,272:127832.

[66] Youssef K M,Zaddach A J,Zaddach A J,et al.A novel low-density,high-hardness,high-entropy alloy with close-packed single-phase nanocrystalline structures[J].Materials Research Letters,2015,3(2):95-99.

[67] Chauhan P,Yebaji S,Nadakuduru V N,et al.Development of a novel light weight Al35Cr14Mg6Ti35V10 high entropy alloy using mechanical alloying and spark plasma sintering[J].Journal of Alloys and Compounds,2020,820:153367.

[68] Han Z D,Chen N,Zhao S F,et al.Effect of Ti additions on mechanical properties of NbMoTaW and VNbMoTaW refractory high entropy alloys[J].Intermetallics,2017,84:153-157.

[69] Xu Z Q,Ma Z L,Wang M,et al.Design of novel low-density refractory high entropy alloys for high-temperature applications[J].Materials Science and Engineering A,2019,755:318-322.

[70] Zhang W R,Liaw P,Zhang Y.A novel low-activation VCrFeTaxWx (x=0.1,0.2,0.3,0.4,and 1) high-entropy alloys with excellent heat-softening resistance[J].Entropy,2018,20(12):951.

[71] Xian X,Zhong Z H,Zhang B W,et al.A high-entropy V35Ti35Fe15Cr10Zr5 alloy with excellent high-temperature strength[J].Materials and Design,2017,121:229-236.

[72] Waseem O A,Ryu H J.Combinatorial development of the low-density high-entropy alloy Al10Cr20Mo20Nb20Ti20Zr10 having gigapascal strength at 1000 ℃[J].Journal of Alloys and Compounds,2020,845:155700.

[73] Juan C C,Tsai M H,Tsai C W,et al.Enhanced mechanical properties of HfMoTaTiZr and HfMoNbTaTiZr refractory high-entropy alloys[J].Intermetallics,2015,62:76-83.

[74] Zhao Y L,Yang T,Li Y R,et al.Superior high-temperature properties and deformation-induced planar faults in a novel L12-strengthened high-entropy alloy[J].Acta Materialia,2020,188:517-527.

[75] Liu D J,Yu P F,Li G,et al.High-temperature high-entropy alloys AlxCo15Cr15Ni70-x based on the Al-Ni binary system[J].Materials Science and Engineering A,2018,724:283-288.

[76] Zhou P L,Xiao D H,Zhou P F,et al.Microstructure and properties of ultrafine grained AlCrFeCoNi/WC cemented carbides[J].Ceramics International,2018,44(14):17160-17166.

[77] Andrea M G,Alveen P,Rassbach S,et al.The manufacture and characterization of WC-(Al)CoCrCuFeNi cemented carbides with nominally high entropy alloy binders[J].International Journal of Refractory Metals and Hard Materials,2019,84:105032.

[78] Dai W J,Lu T,Pan Y.Novel and promising electrocatalyst for oxygen evolution reaction based on MnFeCoNi high entropy alloy[J].Journal of Power Sources,2019,430:104-111.

[79] Zhang C,Song A,Yuan Y,et al.Study on the hydrogen storage properties of a TiZrNbTa high entropy alloy[J].International Journal of Hydrogen Energy,2020,45(8):5367-5374.