| 442 | 18 | 4 |
| 下载次数 | 被引频次 | 阅读次数 |
在异步轧制条件下,研究了高锰钢的显微组织变化及其加工硬化机制。结果表明,经异步轧制后,随着变形量的增大,高锰钢中滑移带的密度逐渐增大;高锰钢晶粒内部出现大量的形变孪晶和高密度位错缠结,晶粒细化明显;高锰钢晶体在变形后仍然为面心立方的奥氏体,没有发生马氏体相变;在不同的变形量下,高锰钢中主要的加工硬化机制不同。
Abstract：Microstructure and work-hardening mechanism of a high manganese steel processed by asymmetrical cold rolling were investigated.The results show that the density of slip band of the high manganese steel is enhanced gradually with the increase of deformation amount.A lot of deformation twin and high density dislocation tangle appears in the high manganese steel after asymmetrical cold rolling,and the grain size is refined obviously.Face-centered cubic austenite structure remains and martensitic transformation does not occur in the deformed high manganese steel.The work-hardening mechanisms are different for the high manganese steel with different amount of deformation.
[1]祖方遒,李小蕴,刘兰俊,等.不同相对冲击功下高锰钢组织与加工硬化机制的研究[J].材料热处理学报,2006,27(2):71-74.ZU Fang-qiu,LI Xiao-yun,LIU Lan-jun,et al.Research on microstructure and work hardening mechanism of high manganese steel by simulating actualworking condition[J].Transactions of Materials and Heat Treatment,2006,27(2):71-74.
[2]Emin Bayraktar,Fazal A.Khalid,Christophe Levaillant.Deformation and fracture behaviour of high manganese austenitic steel[J].Journal of MaterialsProcessing Technology,2004,147:145-154.
[3]Dastur Y N,Leslie W C.Mechanism of work hardening in hadfield manganese steel[J].Metallurgical Transaction A,1981,12:749-757.
[4]石德柯,刘军海.高锰钢的变形与加工硬化[J].金属学报,1989,25(4):142-145.SHI De-ke,LIU Jun-hai.Deformation and work hardening of Hadfield manganese steel[J].Acta Metallurgica Sinica,1989,25(4):142-145.
[5]许云华,陈渝眉,熊建龙,等.冲击载荷下应变诱导高锰钢表层组织纳米化机制[J].金属学报,2001,37(2):165-170.XU Yun-hua,CHEN Yu-mei,XIONG Jian-long,et al.Mechanism of strain-induced nanocrystallization of hadfield steel under high energy impact load[J].Acta Metallurgica Sinica,2001,37(2):165-170.
[6]薛继仁,于启湛,史春元.高锰钢爆炸加工硬化及其硬化机理[J].大连铁道学院学报,1997,18(4):65-69.XUE Ji-ren,YU Qi-zhan,SHI Chun-yuan.Explosive hardening and it s mechanism on manganese steel[J].Journal of Dalian Railway Institute,1997,18(4):65-69.
基本信息:
DOI：
中图分类号:TG335
引用信息:
[1]张贵杰,李海英,宋卓霞等.异步轧制条件下高锰钢的显微组织与加工硬化机制[J].材料热处理学报,2009,30(05):115-118.
基金信息:
河北省科技发展计划项目(07215127)