材料热处理学报

[1] 许斌，王庆田，李宁，等.新一代反应堆堆内构件材料[J].特钢技术，2012,18(3):1-3.XU Bin,WANG Qing-tian,LI Ning,et al.Discussion on RVI material for the new generation nuclear reactor[J].Special Steel Technology,2012,18(3):1-3.

[2] Li C W,Chang K C,Yeh A C,et al.Microstructure characterization of cemented carbide fabricated by selective laser melting process[J].International Journal of Refractory Metals and Hard Materials,2018,75:225-233.

[3] 李倩云.中国高温合金GH4169研究现状及发展趋势[J].工程技术与管理，2017,1(3):268-269.LI Qian-yun.China’s high-temperature alloy GH4169 research status and development trend[J].Engineering Technology and Management,2017,1(3):268-269.

[4] 韦家虎，董建新，喻健，等.δ相对GH4169合金热变形行为的影响[J].航空材料学报，2012,32(6):72-77.WEI Jia-hu,DONG Jian-xin,YU Jian,et al.Influence of δ phase on hot deformation behavior of GH4169 alloy[J].Journal of Aeronautical Materials,2012,32(6):72-77.

[5] 贾均红，吕晋军，周惠娣，等.镍基复合材料在水环境中的摩擦学性能及磨损机理研究[J].材料科学与工程学报，2004,22(1):28-32.JIA Jun-hong,Lü Jin-jun,ZHOU Hui-di,et al.Investigation on the tribological properties and wear mechanisms of nickel based composite under water lubrication[J].Journal of Materials Science & Engineering,2004,22(1):28-32.

[6] 高永康，陈洪胜，聂慧慧，等.激光增材制造镍基复合材料界面连接机制与断裂行为[J].复合材料学报，2023,40(3):1797-1806.GAO Yong-kang,CHEN Hong-sheng,NIE Hui-hui,et al.Interface connection mechanism and fracture behavior of nickel-based composites fabricated by selective laser melting[J].Acta Materiae Compositae Sinica,2023,40(3):1797-1806.

[7] Song J,Guo Q,Ouyang Q,et al.Influence of interfaces on the mechanical behavior of Si C particulate-reinforced Al-Zn-Mg-Cu composites[J].Materials Science and Engineering A,2015,644:79-84.

[8] Khorshid M,Jahromi S,Moshksar M.Mechanical properties of tri-modal Al matrix composites reinforced by nano-and submicron-sized Al2O3 particulates developed by wet attrition milling and hot extrusion[J].Materials & Design,2010,31:3880-3884.

[9] Harsha S,Dwivedi D K,Agarwal A.Influence of CrC addition in Ni-Cr-Si-B flame sprayed coatings on microstructure,microhardness and wear behaviour[J].The International Journal of Advanced Manufacturing Technology,2008,38:93-101.

[10] 苏义祥，张志坚，邱晓来，等.Cr3C2对45钢表面超音速火焰喷涂制备的Ni基合金涂层热态抗磨损性能的影响[J].材料导报，2018,32(6):899-904.SU Yi-xiang,ZHANG Zhi-jian,QIU Xiao-lai,et al.Effect of Cr3C2 addition on thermal wear resistant performance of high velocity oxygen fuel sprayed nickel-based alloy coating on 45 steel substrates[J].Materials Review,2018,32(6):899-904.

[11] Wang H M,Yu Y L,Li S Q.Microstructure and tribological properties of laser clad CaF2/Al2O3 self-lubrication wear-resistant ceramic matrix composite coatings[J].Scripta Materialia,2002,47(1):57-61.

[12] Tyagi R,Xiong D S,Li J L.Effect of load and sliding speed on friction and wear behavior of silver/h-BN containing Ni-base P/M composites[J].Wear,2011,270:423-430.

[13] 蒋蔚，张蕾，韩涛.高温水轴承的选材与设计[J].轴承，2010(1):15-18.JIANG Wei,ZHANG Lei,HAN Tao.Selection and design of high temperature water bearings[J].Bearings,2010(1):15-18.

[14] 卢铃，朱定一，汪才良.金属基/石墨固体自润滑材料的研究进展[J].材料导报，2007,21(2):38-41.LU Ling,ZHU Ding-yi,WANG Cai-liang.Recent development of metal-matrix/graphite solid self-lubricating materials[J].Materials Review,2007,21(2):38-41.

[15] 陈丽娟，朱定一，汤伟，等.镍-铁-石墨-硅自润滑材料及其性能[J].中国有色金属学报，2004,14(12):2108-2113.CHEN Li-juan,ZHU Ding-yi,TANG Wei,et al.Ni-Fe-C-Si self-lubricating material and its properties[J].The Chinese Journal of Nonferrous Metals,2004,14(12):2108-2113.

[16] 邵军超，刘越.颗粒增强金属基复合材料力学行为有限元模拟研究现状[J].材料导报，2007,21(9):111-115.SHAO Jun-chao,LIU Yue.A review of finite element simulations on the mechanical behavior for particles reinforced metal matrix composites[J].Materials Review,2007,21(9):111-115.

[17] Zhang H,Chong L,Guo Q,et al.Hot tensile behavior of cold-rolled Inconel 718 alloy at 650 ℃:The role of δ phase[J].Materials Science and Engineering A,2018,722(11):136-146.

[18] 刘永长，郭倩颖，李冲，等.Inconel 718 高温合金中析出相演变研究进展[J].金属学报，2016,52(10):1259-1266.LIU Yong-chang,GUO Qian-ying,LI Chong,et al.Recent progress on evolution of precipitates in Inconel 718 superalloy[J].Acta Metallurgical Sinica,2016,52(10):1259-1266.

[19] Idowu O A,Ojo O A,Chaturvedi M C.Effect of heat input on heat affected zone cracking in laser welded ATI Allvac 718Plus superalloy[J].Materials Science and Engineering A,2007,454-455:389-397.

[20] Popovich V A,Borisov E V,Popovich A A,et al.Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting[J].Materials & Design,2017,131(18):12-22.

[21] 吉传波，王晓峰，邹金文，等.石墨烯增强镍基粉末高温合金复合材料的力学性能[J].材料工程，2017,45(3):1-6.JI Chuan-bo,WANG Xiao-feng,ZOU Jin-wen,et al.Mechanical properties of graphene reinforced nickel-based P/M superalloy[J].Journal of Materials Engineering,2017,45(3):1-6.

[22] Hakamada M,Nakamoto Y,Matsumoto H,et al.Relationship between hardness and grain size in electrodeposited copper films[J].Materials Science and Engineering A,2007,457(1/2):120-126.

[23] Ji G,Liu H,Yang G J,et al.Effect of friction stir spot processing on microstructure and mechanical properties of cold-sprayed Al coating on Ti substrate[J].Surface and Coatings Technology,2021,421(15):1-12.

[24] Benedetti M,Fontanari V,Lusuardi D.Effect of graphite morphology on the fatigue and fracture resistance of ferritic ductile cast iron[J].Engineering Fracture Mechanics,2019,206(1):427-441.

[25] Li J,Xiong D.Tribological behavior of graphite-containing nickel-based composite as function of temperature,load and counterface[J].Wear,2009,266(1):360-367.

[26] Liu E Y,Wang W Z,Gao Y M,et al.Tribological properties of Ni-based self-lubricating composites with addition of silver and molybdenum disulfide[J].Tribology International,2013,57(4):235-241.

[27] 樊江磊，王娇娇，王霄，等.石墨类型对铜基粉末冶金摩擦材料摩擦磨损性能的影响[J].粉末冶金工业，2024,34(1):51-59.FAN Jiang-lei,WANG Jiao-jiao,WANG Xiao,et al.Effect of graphite lubrication component type on the microstructure formation and properties of high-speed braking Cu-based friction materials[J].Powder Metallurgy Industry,2024,34(1):51-59.

[28] Li J L,Xiong D S.Tribological behavior of graphite-containing nickel-based composite as function of temperature,load and counterface[J].Wear,2009,266(1):360-367.

[29] Verdi D,Garrido M N,Claudio J M,et al.Effect of Cr3C2 reinforcement on the tribological performance of Inconel 625 laser cladding coatings[C]//World Tribology Congress,Torino,Italy,2013:3338-3341.