材料热处理学报

[1] Chen N.Tuning the mechanical properties of metastable beta titanium alloys through the control of microstructure and deformation mechanisms[D].Madrid:Universidad Politécnica de Madrid,2022.

[2] Stenlund P,Omar O,Brohede U,et al.Bone response to a novel Ti-Ta-Nb-Zr alloy[J].Acta Biomaterialia,2015,20:165-175.

[3] Niinomi M.Fatigue performance and cyto-toxicity of low rigidity titanium alloy,Ti-29Nb-13Ta-4.6Zr[J].Biomaterials,2003,24(16):2673-2683.

[4] 李强，马东，周凯，等.医用β型钛合金中氧元素的作用[J].有色金属材料与工程，2017,38(6):351-355.LI Qiang,MA Dong,ZHOU Kai,et al.Influence of oxygen in β-type titanium alloy for biomedical application[J].Nonferrous Metal Materials and Engineering,2017,38(6):351-355.

[5] 白帅军，肖笑，王雪晴，等.钛合金增材成形件的粉末细化晶粒机理研究进展[J].材料热处理学报，2024,45(12):1-9.BAI Shuai-jun,XIAO Xiao,WANG Xue-qing,et al.Research progress on mechanism of powder grain refinement of titanium alloy additive formed parts[J].Transactions of Materials and Heat Treatment,2024,45(12):1-9.

[6] Eisenbarth E,Velten D,Müller M,et al.Biocompatibility of β-stabilizing elements of titanium alloys[J].Biomaterials,2004,25(26):5705-5713.

[7] 应真鸿.射频等离子体制备增材制造用钽及钛钽合金粉[D].南昌：南昌航空大学，2021.YING Zhen-hong.Tantalum and titanium-tantalum alloy powder for additive manufacturing prepared by RF plasma[D].Nanchang:Nanchang Hangkong University,2021.

[8] 赵少阳，殷京瓯，王利卿，等.Ti-60Ta合金快速凝固过程中的相变研究[J].稀有金属材料与工程，2022,51(3):934-939.ZHAO Shao-yang,YIN Jing-ou,WANG Li-qing,et al.Research on phase transformation of Ti-60Ta alloy during rapid solidification[J].Rare Metal Materials and Engineering,2022,51(3):934-939.

[9] Zhou Y L,Niinomi M,Akahori T.Effects of Ta content on Young’s modulus and tensile properties of binary Ti-Ta alloys for biomedical applications[J].Materials Science and Engineering A,2004,371(1/2):283-290.

[10] Murray J L.The Ta-Ti (Tantalum-Titanium) system[J].Bulletin of Alloy Phase Diagrams,1981,2(1):62-66.

[11] Liu Y,Li K,Wu H,et al.Synthesis of Ti-Ta alloys with dual structure by incomplete diffusion between elemental powders[J].Journal of the Mechanical Behavior of Biomedical Materials,2015,51:302-312.

[12] Huang S,Sing S L,De Looze G,et al.Laser powder bed fusion of titanium-tantalum alloys:Compositions and designs for biomedical applications[J].Journal of the Mechanical Behavior of Biomedical Materials,2020,108:103775.

[13] Zhao D,Liang H,Han C,et al.3D printing of a titanium-tantalum Gyroid scaffold with superb elastic admissible strain,bioactivity and in-situ bone regeneration capability[J].Additive Manufacturing,2021,47:102223.

[14] 刘包发，胡剑南，石俊杰，等.热处理对增材制造 TC4 钛合金组织结构及耐蚀性能的影响[J].材料热处理学报，2023,44(5):86-94.LIU Bao-fa,HU Jian-nan,SHI Jun-jie,et al.Effect of heat treatment on microstructure and corrosion resistance of TC4 titanium alloy manufactured by additive[J].Transactions of Materials and Heat Treatment,2023,44(5):86-94.

[15] Jing L,Xin L,Yuan H Q,et al.Study on microstructure and property of laser solid forming TC4 titanium alloy[J].Chinese Journal of Lasers,2014,41(11):1103010.

[16] 关宝胜.激光增材制造钼及钼合金的组织与力学性能研究[D].北京：北方工业大学，2022.GUAN Bao-sheng.Microstructure and mechanical properties of Mo and Mo alloys prepared using laser additive manufacturing processes[D].Beijing:North China University of Technology,2022.

[17] 韩志豪，张弘斌，周海萍，等.激光熔化沉积成形新型多组元 Ni3Al 合金的组织与力学性能[J].材料热处理学报，2024,45(3):140-147.HAN Zhi-hao,ZHANG Hong-bin,ZHOU Hai-ping,et al.Microstructure and mechanical properties of a new multi-component Ni3Al alloy formed by laser melting deposition[J].Transactions of Materials and Heat Treatment,2024,45(3):140-147.

[18] 高健，刘奋成，刘丰刚，等.环境氧含量对激光定向能量沉积TC4合金组织及性能的影响[J].稀有金属材料与工程，2023,52(11):3881-3892.GAO Jian,LIU Fen-cheng,LIU Feng-gang,et al.Effects of atomtmosphere oxygen content on microstructure and mechanical properties of TC4 titanium alloy prepared by laser directed energy deposition[J].Rare Metal Materials and Engineering,2023,52(11):3881-3892.

[19] Morita M,Suzuki S,Kato Y,et al.Tensile deformation of texture-controlled titanium with high oxygen content at room temperature[J].Materials Science and Engineering A,2020,793:139660.

[20] Niu J G,Geng W T.Oxygen-induced lattice distortion in β-Ti3Nb and its suppression effect on β to α″ transformation[J].Acta Materialia,2014,81:194-203.

[21] Li S J,Cui T C,Hao Y L,et al.Fatigue properties of a metastable β-type titanium alloy with reversible phase transformation[J].Acta Biomaterialia,2008,4(2):305-317.

[22] Kazantseva N,Krakhmalev P,Thuvander M,et al.Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing[J].Materials Characterization,2018,146:101-112.

[23] 张力书.激光混合增材制造TC4工艺研究[D].沈阳：沈阳航空航天大学，2020.ZHANG Li-shu.Research on the technology of TC4 manufactured by laser hybrid addictive manufacturing[D].Shenyang:Shenyang Aerospace University,2019.

[24] 孙东升.钛合金选区激光熔化增材制造工艺及性能调控研究[D].南京：南京航空航天大学，2019.SUN Dong-sheng.Process and property control of selective laser melting additive manufacturing of titanium alloy[D].Nanjing:Nanjing University of Aeronautics and Astronautics,2019.

[25] 袁少红，宋文城，王俊，等.钛合金中初生α相含量测试方法探讨[J].冶金分析，2023,43(4):58-63.YUAN Shao-hong,SONG Wen-cheng,WANG Jun,et al.Discussion on determination method of primary α phase in titanium alloy[J].Metallurgical Analysis,2023,43(4):58-63.

[26] Hassine N,Chatti S,Kolsi L.Tailoring grain structure including grain size distribution,morphology,and orientation via building parameters on 316L parts produced by laser powder bed fusion[J].The International Journal of Advanced Manufacturing Technology,2024,131(9):4483-4498.

[27] Dobromyslov A V,Dolgikh G V,Dutkevich Ya,et al.Phase and structural transformations in Ti-Ta alloys[J].The Physics of Metals and Metallography,2009,107(5):502-510.

[28] Chakraborty T,Rogal J,Drautz R.Martensitic transformation between competing phases in Ti-Ta alloys:a solid-state nudged elastic band study[J].Journal of Physics:Condensed Matter,2015,27(11):115401.

[29] Illarionov A G,Popov A A,Grib S V,et al.Special features of formation of omega-phase in titanium alloys due to hardening[J].Metal Science and Heat Treatment,2011,52(9/10):493-498.

[30] 马红征，杨军红，何伟，等.β型钛合金相变温度的新型金相测试方法[J].理化检验(物理分册),2020,56(2):15-20.MA Hong-zheng,YANG Jun-hong,HE Wei,et al.New metallographic test method of phase transformation temperatures of β-titanium alloy[J].Physical Testing and Chemical Analysis (Part A:Physical Testing),2020,56(2):15-20.

[31] Yan S,Zhu Z,Ma C,et al.Porosity formation and its effect on the properties of hybrid laser welded Al alloy joints[J].The International Journal of Advanced Manufacturing Technology,2019,104(5):2645-2656.

[32] 王龙刚，包婷婷，谭长生，等.形变热处理对TC9钛合金组织及拉伸性能的影响[J].材料热处理学报，2024,45(11):85-92.WANG Long-gang,BAO Ting-ting,TAN Chang-sheng,et al.Effect of thermomechanical treatment on microstructure and tensile properties of TC9 titanium alloy[J].Transactions of Materials and Heat Treatment,2024,45(11):85-92.

[33] Chen P,Qiu C,Wu W,et al.Role of shielding gas and rolling treatment on mechanical properties of CP-Ti sheet fabricated by selective laser melting[J].Journal of Materials Research and Technology,2024,29:1066-1075.

[34] Sing S L,Yeong W Y,Wiria F E.Selective laser melting of titanium alloy with 50 wt% tantalum:Microstructure and mechanical properties[J].Journal of Alloys and Compounds,2016,660:461-470.

[35] Mertens A,Reginster S,Paydas H,et al.Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by selective laser melting:Influence of out-of-equilibrium microstructures[J].Powder Metallurgy,2014,57(3):184-189.

[36] Wang C,Cai Q,Liu J,et al.Strengthening mechanism of lamellar-structured Ti-Ta alloys prepared by powder metallurgy[J].Journal of Materials Research and Technology,2022,21:2868-2879.

[37] Zhou Y L,Niinomi M.Microstructures and mechanical properties of Ti-50mass% Ta alloy for biomedical applications[J].Journal of Alloys and Compounds,2008,466(1/2):535-542.

[38] 杨聪聪.双相Ti-1023合金力学特性及变形机制研究[D].西安：西安建筑科技大学，2023.YANG Cong-cong.Study on mechanical properties and deformation mechanism of duplex Ti1023 alloy[D].Xi’an:Xi’an University of Architecture and Technology,2023.