王楠楠,邱然锋,石红信

• 1:河南科技大学材料科学与工程学院
• 2:中国民航飞行学院洛阳分院

摘要(Abstract)：

以AlSi12为中间层对A6061铝合金与Q235低碳钢进行了电阻点焊,分析了界面区金属间化合物层形貌及分布等微观组织结构特征,探讨了焊接电流、焊接时间与电极压力对接头熔核尺寸和抗剪力的影响。结果表明:接头熔核直径、抗剪力随焊接电流、焊接时间的增加而增加,随电极压力的增大而降低,所得接头抗剪力达到4.87 kN,中间过渡层的使用起到了抑制界面金属间化合物生长的效果。

关键词(KeyWords)： 点焊;中间层;铝合金;钢

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51875177);; 河南省国际合作项目(182102410066);; 河南省高校科技创新人才计划基金(16HASTIT050)

作者(Author): 王楠楠,邱然锋,石红信

DOI: 10.13289/j.issn.1009-6264.2018-0325

参考文献(References)：

• [1] 张桂源,郄新哲,宫文彪,等.钢铝异种材料搅拌摩擦焊界面组织及性能[J].材料热处理学报,2018,39(5):159-164.ZHANG Gui-yuan,QIE Xin-zhe,GONG Wen-biao,et al.Microstructure and properties of friction stir welding interface of steel and aluminum dissimilar materials[J].Transactions of Materials and Heat Treatment,2018,39(5):159-164.
• [2] Qiu R F,Wang N N,Shi H X,et al.Joining steel to aluminum alloy by resistance spot welding with a rivet[J].Internation Journal of Materials Research,2015,106(1):60-65.
• [3] Ling Z X,Li Y,Luo Z,et al.Resistance element welding of 6061 aluminum alloy to uncoated 22MnMoB boron steel[J].Materials and Manufacturing Processes,2016,31(16):2174-2180.
• [4] 凌展翔,罗震,冯悦峤,等.硼钢与铝合金的新型电阻单元焊技术[J].焊接学报,2016,37(7):109-113.LING Zhan-xiang,LUO Zhen,FENG Yue-qiao,et al.Novel resistance element welding of Al alloy to boron steel[J].Transactions of the China Welding Institution,2016,37(7):109-113.
• [5] 凌展翔,罗震,冯悦峤,等.铝钢点焊铆接复合连接技术[J].焊接学报,2017,38(2):101-104.LING Zhan-xiang,LUO Zhen,FENG Yue-qiao,et al.A combination joining technology of spot welding and riveting for aluminum and steel[J].Transactions of the China Welding Institution,2017,38(2):101-104.
• [6] Ling Z X,Li Y,Luo Z,et al.Microstructure and fatigue behavior of resistance element welded dissimilar joints of DP780 dual-phase steel to 6061-T6 aluminum alloy[J].International Journal of Advanced Manufacturing Technology,2017,92(5/8):1923-1931.
• [7] Lou M,Li Y B,Wang Y,et al.Influence of resistance heating on self-piercing riveted dissimilar joints of AA6061-T6 and galvanized DP590[J].Journal of Materials Processing Technology,2014,214:2119-2126.
• [8] Chen J B,Yuan X J,Hu Z,et al.Improvement of resistance-spot-welded joints for DP600 steel and A5052 aluminum alloy with Zn slice interlayer[J].Journal of Manufacturing Processes,2017,30:396-405.
• [9] 张月莹,孙大千,李洪梅,等.Cu对铝/钢异种金属电阻点焊接头组织及性能的影响[J].长春工业大学学报,2017,38(1):8-13.ZHANG Yue-ying,SUN Da-qian,LI Hong-mei,et al.Effects of Cu on microstructures and properties of resistance spot welded joints of aluminium and steel[J].Journal of Changchun University of Technology,2017,38(1):8-13.
• [10] Ibrahim I,Ito R,Kakiuchi T,et al.Fatigue behaviour of Al/steel dissimilar resistance spot welds fabricated using Al-Mg interlayer[J].Science and Technology of Welding and Joining,2016,21(3):223-233.
• [11] Matsumoto K,Urushihara W,Takeda M,et al.Effects of silicon content on joint strength of aluminum alloy and steel spot welded joints[J].Research and Development Kobe Steel Engineering Reports,2012,62(2):77-81.
• [12] 张柯柯,杜宜乐,邱然锋,等.A6061铝合金与Q235 钢电阻点焊接头组织与性能[J].材料热处理学报,2012,33(12):64-67.ZHANG Ke-ke,DU Yi-le,QIU Ran-Feng,et al.Microstructure and properties of A6061 aluminum alloy/Q235 steel joint welded by resistance spot welding[J].Transactions of Materials and Heat Treatment,2012,33(12):64-67.
• [13] 邱然锋,李久勇,贺玉刚,等.铝合金/低碳钢点焊界面反应物生长机制[J].中国有色金属学报,2017,27(6):1176-1181.QIU Ran-feng,LI Jiu-yong,HE Yu-gang,et al.Growth mechanism of reactants at spot welding interface between aluminum alloy and low carbon steel[J].The Chinese Journal of Nonferrous Metals,2017,27(6):1176-1181.
• [14] 王楠楠,邱然锋,石红信,等.铝合金与低碳钢的夹层电阻点焊接头特性[J].材料热处理学报,2015,36(1):70-74.WANG Nan-nan,QIU Ran-Feng,SHI Hong-xin,et al.Charaterization of resistance spot welded joint between aluminum alloy and mild steel with an interlayer[J].Transactions of Materials and Heat Treatment,2015,36(1):70-74.

文章评论(Comment)：