杨理京,李祉宏,李波,吴国龙,姚建华

• 1:浙江工业大学激光先进制造研究院
• 2:浙江省高端激光制造装备协同创新中心

摘要(Abstract)：

利用超音速激光沉积和激光熔覆技术分别在中碳钢基材上制备了镍基金刚石复合涂层,并采用扫描电子显微镜(SEM)、能谱分析(EDS)、X射线衍射分析(XRD)等手段对涂层显微组织特征、相组成进行了对比分析,探究不同工艺制备金刚石强化涂层的可行性。结果表明:激光熔覆复合涂层的金刚石颗粒发生了严重的烧蚀和石墨化相变;而超音速激光沉积复合涂层中金刚石颗粒分布均匀、无相变;超音速激光沉积涂层与原始粉末的衍射图谱、相组成基本一致,而激光熔覆涂层中产生Cr5Si3、Fe3C等新相。

关键词(KeyWords)： 冷喷涂;激光熔覆;金刚石;石墨化;镍基合金

Abstract:

Keywords:

基金项目(Foundation): NSFC-浙江两化融合联合基金(U1509201);; 国家自然科学基金面上项目(51475429)

作者(Author): 杨理京,李祉宏,李波,吴国龙,姚建华

DOI: 10.13289/j.issn.1009-6264.2016.06.037

参考文献(References)：

• [1]Iravani M,Khajepour A,Corbinc S,et al.Pre-placed laser cladding of metal matrix diamond composite on mild steel[J].Surface and Coatings Technology,2012,206(8):2089-2097.
• [2]曾群锋,董光能,罗莉.类金刚石膜的高温摩擦特性及热力学分析[J].材料热处理学报,2014,35(9):151-155.ZENG Qun-feng,DONG Guang-neng,LUO Li.Friction behavior of DLC films under high temperature and analysis of thermodynamics[J].Transactions of Materials and Heat Treatment,2014,35(9):151-155.
• [3]Chen N C,Sun F H.Cutting performance of multilayer diamond coated silicon nitride inserts in machining aluminum-silicon alloy[J].Transactions of Nonferrous Metals Society of China,2013,23:1985-1992.
• [4]吕反修.化学气相沉积金刚石膜的研究与应用进展[J].材料热处理学报,2010,31(1):15-28.LFan-xiu.Progress in research and application development of CVD diamond film[J].Trans Mater Heat Treat,2010,31(1):15-28.
• [5]Venkateswarlu K,Rajnikanth V,Naveen T,et al.Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques[J].Wear,2009,266(9):995-1002.
• [6]吴茂,曹车正,王越,等.Ag-Cu-Ti钎焊金刚石/铜复合材料的组织和性能[J].材料热处理学报,2013,34(3):30-34.WU Mao,CAO Che-zheng,WANG Yue,et al.Microstructure and mechanical properties of diamond/Cu composite joint using Ag-Cu-Ti active brazing alloy[J].Trans Mater Heat Treat,2013,34(3):30-34.
• [7]李祉宏,杨理京,张群莉,等.超音速激光沉积与激光熔覆Stellite 6涂层的对比研究[J].中国激光,2015,42(5):0503008.LI Zhi-hong,YANG Li-jing,ZHANG Qun-li,et al.Comparative research of Stellite 6 coatings prepared by supersonic laser deposition and laser cladding[J].Chinese Journal of Lasers,2015,42(5):0503008.
• [8]魏刚,郭玥,张镜斌,等.激光熔覆纳米金刚石减摩涂层研究[J].热加工工艺,2009,38(24):99-102.WEI Gang,GUO Yue,ZHANG Jing-bin,et al.Study on properties of nano-diamond anti-friction layer prepared by laser cladding[J].Hot Working Technology,2009,38(24):99-102.
• [9]吴佳,张群莉,吴国龙,等.激光熔覆复合涂层中金刚石的形态转变对涂层性能的影响[J].应用激光,2015,35(1):14-19.WU Jia,ZHANG Qun-li,WU Guo-long,et al.Effect of diamond morphology transformation on properties of the laser cladding composite coating[J].Applied Laser,2015,35(1):14-19.
• [10]Mehrdad I,Amir K,Stephen C,et al.Pre-placed laser cladding of metal matrix diamond composite on mild steel[J].Surface and Coatings Technology,2012,206:2089-2097.
• [11]Matthew B,Andrew C,William O.The laser-assisted cold spray process and deposited characterization[J].Surface and Coatings Technology,2009,203(19):2851-2857.
• [12]周香林,张济山,巫湘坤.先进冷喷涂技术与应用[M].北京:机械工业出版社,2011.
• [13]Luo X T,Yang G J,Li C J,et al.High strain rate induced localized amorphization in cubic BN/Ni Cr Al nanocomposite through high velocity impact[J].Scripta Materialia,2011,65:581-584.
• [14]Couto M,Dosta S,Torrell M,et al.Cold spray deposition of WC-17 and 12 Co cermets onto aluminum[J].Surface and Coatings Technology,2013,235:54-61.
• [15]所新坤,杨冠军,李长久.镍基金刚石复合涂层的冷喷涂制备[J].材料研究与应用,2009,3(1):32-36.SUO Xin-kun,YANG Guan-jun,LI Chang-jiu.Preparation of Ni-based diamond composite coatings by cold spray[J].Materials Research and Application,2009,3(1):32-36.
• [16]Fang L,Andrew C,Rocco L,et al.Performance comparison of Stellite 6 deposited on steel using supersonic laser deposition and laser cladding[J].Surface and Coatings Technology,2012,212:119-127.
• [17]Yao J H,Yang L J,Li B,et al.Beneficial effects of laser irradiation on the deposition process of diamond/Ni60 composite coating with cold spray[J].Applied Surface Science,2015,330:300-308.
• [18]Li W Y,Huang C J,Yu M,et al.Investigation on mechanical property of annealed copper particles and cold sprayed copper coating by a microindentation testing[J].Materials&Design,2013,46:219-226.

文章评论(Comment)：