常志国,徐瑞

• 1:亚稳材料制备技术与科学国家重点实验室
• 2:燕山大学材料科学与工程学院

摘要(Abstract)：

利用CS-1B型高压六面顶压机对近包晶点成分的Zn-2.75%Cu包晶合金分别进行2、4、6 GPa的高压凝固实验,对比研究了Zn-2.75%Cu合金在不同压力条件下获得的凝固组织。结果表明,与常压凝固相比,在超高压力条件下凝固的合金的显微组织形貌发生了很大的改变,但是合金的相组成没有发生变化;合金的高压凝固组织中初生ε相呈现枝晶状,与原始铸态组织相比,高压凝固合金组织中初生ε相体积分数明显增多,4 GPa时完整的羽毛状枝晶数量最多。

关键词(KeyWords)： Zn-Cu合金;包晶凝固;高压凝固;显微组织

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 常志国,徐瑞

DOI: 10.13289/j.issn.1009-6264.2014.s2.005

参考文献(References)：

• [1]Kerr H W,Kurz W.Solidification of peritectic alloys[J].International Materials Reviews,1996,41(4):129-164.
• [2]Masaki S.Evolution of two phase microstructure in peritectic Fe-Ni alloy[J].Journal of Alloys and Compounds,2003,349:302-310.
• [3]Valloton J,Wagniere J-D,Rappaz M.Competition of the primary and peritectic phases in hypoperitectic Cu-Sn alloys solidified at low speed in a diffusive regime[J].Acta Materialia,2012,60:3840-3848.
• [4]李曼,薛祥义,胡锐,等.Ti-48(at%)Al包晶合金中β/α相的过冷形核[J].航空材料学报,2012,32(2):1-7.LI Man,XUE Xiang-yi,HU Rui,et al.Nucleation ofβ/αphases in undercooled Ti-48(at%)Al peritectic alloy[J].Journal of Aeronautical Materials,2012,32(2):1-7.
• [5]Rao Q L,Fan X L,Shu D,et al.In-situ XRD study on the peritectic reaction of YBCO thin film on Mg O substrate[J].Journal of Alloys and Compounds,2008,461(1-2):29-33.
• [6]Su Y Q,Wang S J,Luo L S,et al.Morphological characteristics of triple junction region and process of the peritectic reaction during directional solidification of Cu-Ge alloys[J].Journal of Alloys and Compounds,2012,539:44-49.
• [7]王灵水,沈军,商昭,等.对流条件下定向凝固包晶合金的相和微观组织选择[J].金属学报,2013,49(7):822-830.WANG Ling-shui,SHEN Jun,SHANG Zhao,et al.Phase and microstructure selection in directionally solidified peritectic alloys under convection condition[J].Acta Metallurgica Sinica,2013,49(7):822-830.
• [8]Liu D M,Li X Z,Su Y Q,et al.Secondary dendrite arm migration caused by temperature gradient zone melting during peritectic solidification[J].Acta Materialia,2012,60:2679-2688.
• [9]王猛,林鑫,苏云鹏,等.Zn-2%Cu包晶合金定向凝固微观组织研究[J].金属学报,2002,38(4):337-341.WANG Meng,LIN Xin,SU Yun-peng,et al.Microstructures of unidirectionally solidified Zn-2%Cu peritectic alloy[J].Acta Metallurgica Sinica,2002,38(4):337-341.
• [10]胡小武,李双明,高斯峰,等.Pb-30%Bi包晶合金定向凝固的两相微观组织研究[J].铸造,2010,59(5):445-449.HU Xiao-wu,LI Shuang-ming,GAO Si-feng,et al.Investigation of two-phase microstructure during directional solidification of Pb-30wt%Bi peritectic alloy[J].Foundry,2010,59(5):445-449.
• [11]Tian Y J,Xu B,Yu D L,et al.Ultrahard nanotwinned cubic boron nitride[J].Nature,2013,493:385-388.
• [12]魏尊杰,王振玲,王宏伟,等.高压凝固对Al-Mg合金枝晶形态的影响[J].特种铸造及有色合金,2006,26(11):685-687.WEI Zun-jie,WANG Zhen-ling,WANG Hong-wei,et al.Effect of high pressure solidification on dendritic morphology of Al-Mg alloy[J].Special Casting&Nonferrous Alloys,2006,26(11):685-687.
• [13]Chen Y,Liu L,Wang Y H,et al.Microstructure evolution and thermal expansion of Cu-Zn alloy after high pressure heat treatment[J].Transactions of Nonferrous Metals Society of China,2011,21:2205-2209.
• [14]赵鑫,徐瑞.Al-Ni-Y三元共晶合金高压凝固组织[J].中国稀土学报,2012,30(2):181-185.ZHAO Xin,XU Rui.Solidification microstructure of ternary eutectic Al-Ni-Y alloy under high pressure[J].Journal of the Chinese Society of Rare Earths,2012,30(2):181-185.
• [15]Jie J C,Zou C M,Wang H W,et al.Enhancement of mechanical properties of Al-Mg alloy with a high Mg content solidified under high pressures[J].Scripta Materialia,2011,64:588-591.
• [16]赵海丽,徐瑞,李杰,等.高压下Al-Ge合金的凝固组织[J].金属热处理,2005,30(1):28-29.ZHAO Hai-li,XU Rui,LI Jie,et al.Solidified microstructures of Al-Ge alloy under high pressure[J].Heat Treatment of Metals,2005,30(1):28-29.
• [17]董允,林小娉,徐瑞,等.超高压下Mg-6Zn-1Y合金的凝固组织与性能[J].材料热处理学报,2013,34(10):73-82.DONG Yun,LIN Xiao-pin,XU Rui,et al.Microstructure and mechanical properties of Mg-6Zn-1Y alloy solidified at high pressure[J].Transactions of Materials and Heat Treatment,2013,34(10):73-82.

文章评论(Comment)：