姚碧波,彭钰洋,黎振华,李海,王丛

• 1:昆明理工大学机电工程学院
• 2:昆明理工大学材料科学与工程学院

摘要(Abstract)：

Ti-6Al-4V钛合金具备良好的生物相容性、较小的密度以及较高的比强度而常用于航空领域和生物医学领域。选区激光熔化技术作为一种增材制造技术能够制备复杂的零件而被大量用于成形钛合金。选区激光熔化成形的钛合金相比于传统工艺有着更加优异的强度，但是塑性较差。如何制备出成型质量好、力学性能优异的钛合金依然是选区激光熔化技术面临的挑战。基于此，本文结合国内外研究现状，综述了选区激光熔化成形钛合金的进展，包括工艺参数和能量密度以及制备过程中所产生的缺陷对合金性能的影响，探讨了缺陷产生的原因；并总结了后处理对成形试样的拉伸性能和疲劳性能的影响；最后对增材制造钛合金的进一步研究方向进行了展望。

关键词(KeyWords)： Ti-6Al-4V钛合金;选区激光熔化;工艺参数;微观组织;拉伸性能;疲劳性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51961017);; 云南省基础研究计划项目(202101AU070014,202101AS070017);; 昆明理工大学人培项目(KKSY201901012)

作者(Author): 姚碧波,彭钰洋,黎振华,李海,王丛

DOI: 10.13289/j.issn.1009-6264.2023-0494

参考文献(References)：

• [1] 唐伟清，罗军明，陈宇海，等.TC4钛合金表面激光冲击强化-微弧氧化涂层的组织和性能[J].材料热处理学报，2023,44(3):144-151.TANG Wei-qing,LUO Jun-ming,CHEN Yu-hai,et al.Microstructure and properties of laser shock strengthened micro arc oxidation coating on TC4 titanium alloy surface[J].Transactions of Materials and Heat Treatment,2023,44(3):144-151.
• [2] 王琪，李智，张海军，等.增材制造Ti6Al4V基复合材料研究进展[J].中国材料进展，2023,42(5):375-390.WANG Qi,LI Zhi,ZHANG Hai-jun,et al.Progress in additive manufacturing of Ti6Al4V-based composites[J].Materials China,2023,42(5):375-390.
• [3] Kasperovich G,Haubrich J,Gussone J,et al.Correlation between porosity and processing parameters in TiAl6V4 produced by selective laser melting[J].Materials and Design,2016,105:160-170.
• [4] Han J,Yang J J,Yu H C,et al.Microstructure and mechanical property of selective laser melted Ti6Al4V dependence on laser energy density[J].Rapid Prototyping Journal,2017,23(2):217-226.
• [5] Pal S,Gubeljak N,Hudák R,et al.Evolution of the metallurgical properties of Ti-6Al-4V,produced with different laser processing parameters,at constant energy density in selective laser melting[J].Results in Physics,2020,17:103186.
• [6] Pal S,Gubeljak N,Hudak R,et al.Tensile properties of selective laser melting products affected by building orientation and energy density[J].Materials Science and Engineering A,2019,743:637-647.
• [7] 刘包发，胡剑南，石俊杰，等.热处理对增材制造TC4钛合金组织结构及耐蚀性能的影响[J].材料热处理学报，2023,44(5):86-94.LIU Bao-fa,HU Jian-nan,SHI Jun-jie,et al.Effect of heat treatment on microstructure and corrosion resistance of TC4 titanium alloy manufactured by additive[J].Transactions of Materials and Heat Treatment,2023,44(5):86-94.
• [8] Xie Z Y,Dai Y,Ou X Q,et al.Effects of selective laser melting build orientations on the microstructure and tensile performance of Ti-6Al-4V alloy[J].Materials Science and Engineering A,2020,776:139001.
• [9] Mierzejewska Z A.Effect of laser energy density,internal porosity and heat treatment on mechanical behavior of biomedical Ti6Al4V alloy obtained with DMLS technology[J].Materials,2019,12(14):2331.
• [10] Javidrad H R,Ghanbari M,Javidrad F.Effect of scanning pattern and volumetric energy density on the properties of selective laser melting Ti-6Al-4V specimens[J].Journal of Materials Research and Technology,2021,12:989-998.
• [11] Zhao R X,Chen C Y,Wang W,et al.On the role of volumetric energy density in the microstructure and mechanical properties of laser powder bed fusion Ti-6Al-4V alloy[J].Additive Manufacturing,2022,51:102605.
• [12] Scipioni Bertoli U,Wolfer A J,Matthews M J,et al.On the limitations of volumetric energy density as a design parameter for selective laser melting[J].Materials and Design,2017,113:331-340.
• [13] Pal S,Lojen G,Kokol V,et al.Evolution of metallurgical properties of Ti-6Al-4V alloy fabricated in different energy densities in the selective laser melting technique[J].Journal of Manufacturing Processes,2018,35:538-546.
• [14] Cunningham R,Narra S P,Montgomery C,et al.Synchrotron-based X-ray microtomography characterization of the effect of processing variables on porosity formation in laser power-bed additive manufacturing of Ti-6Al-4V[J].JOM,2017,69(3):479-484.
• [15] Shipley H,Mcdonnell D,Culleton M,et al.Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V:A review[J].International Journal of Machine Tools and Manufacture,2018,128:1-20.
• [16] Qiu C L,Panwisawas C,Ward M,et al.On the role of melt flow into the surface structure and porosity development during selective laser melting[J].Acta Materialia,2015,96:72-79.
• [17] Dilip J J S,Zhang S S,Teng C,et al.Influence of processing parameters on the evolution of melt pool,porosity,and microstructures in Ti-6Al-4V alloy parts fabricated by selective laser melting[J].Progress in Additive Manufacturing,2017,2(3):157-167.
• [18] Xu W,Brandt M,Sun S,et al.Additive manufacturing of strong and ductile Ti-6Al-4V by selective laser melting via in situ martensite decomposition[J].Acta Materialia,2015,85:74-84.
• [19] Shi X Z,Yan C,Feng W W,et al.Effect of high layer thickness on surface quality and defect behavior of Ti-6Al-4V fabricated by selective laser melting[J].Optics and Laser Technology,2020,132:106471.
• [20] Shi X Z,Ma S Y,Liu C M,et al.Performance of high layer thickness in selective laser melting of Ti6Al4V[J].Materials,2016,9(12):975.
• [21] Shi W T,Liu Y D,Shi X Z,et al.Beam diameter dependence of performance in thick-layer and high-power selective laser melting of Ti-6Al-4V[J].Materials,2018,11(7):1237.
• [22] Liu Y D,Zhang M,Shi W T,et al.Study on performance optimization of 316L stainless steel parts by high-efficiency selective laser melting[J].Optics and Laser Technology,2021,138:106872.
• [23] Gong H J,Rafi K,Gu H F,et al.Influence of defects on mechanical properties of Ti-6Al-4V components produced by selective laser melting and electron beam melting[J].Materials and Design,2015,86:545-554.
• [24] Gong H,Rafi K S T.The effects of processing parameters on defect regularity in Ti-6Al-4V parts fabricated by selective laser melting and electron beam melting[C]//2013 International Solid Freeform Fabrication Symposium,University of Texas at Austin,2013,424-439.
• [25] Khorasani A,Gibson I,Awan U S,et al.The effect of SLM process parameters on density,hardness,tensile strength and surface quality of Ti-6Al-4V[J].Additive Manufacturing,2019,25:176-186.
• [26] Oyesola M,Mpofu K,Mathe N,et al.Optimization of selective laser melting process parameters for surface quality performance of the fabricated Ti6Al4V[J].The International Journal of Advanced Manufacturing Technology,2021,114(5/6):1585-1599.
• [27] Du L M,Qian G A,Zheng L,et al.Influence of processing parameters of selective laser melting on high-cycle and very-high-cycle fatigue behaviour of Ti-6Al-4V[J].Fatigue & Fracture of Engineering Materials & Structures,2021,44(1):240-256.
• [28] Attar H,Ehtemam-Haghighi S,Kent D,et al.Comparative study of commercially pure titanium produced by laser engineered net shaping,selective laser melting and casting processes[J].Materials Science and Engineering A,2017,705:385-393.
• [29] Liu S Y,Shin Y C.Additive manufacturing of Ti6Al4V alloy:A review[J].Materials and Design,2019,164:107552.
• [30] Wang Z T,Yang S L,Peng Z,et al.Effect of defects in laser selective melting of Ti-6Al-4V alloy on microstructure and mechanical properties after heat treatment[J].Optics and Laser Technology,2022,156:108522.
• [31] Ju J,Li J J,Yang C,et al.Evolution of the microstructure and optimization of the tensile properties of the Ti-6Al-4V alloy by selective laser melting and heat treatment[J].Materials Science and Engineering A,2021,802:140673.
• [32] Liang Z L,Sun Z G,Zhang W S,et al.The effect of heat treatment on microstructure evolution and tensile properties of selective laser melted Ti6Al4V alloy[J].Journal of Alloys and Compounds,2019,782:1041-1048.
• [33] Xi J J,Hu Y,Xing H,et al.The low-cycle fatigue behavior,failure mechanism and prediction of SLM Ti-6Al-4V alloy with different heat treatment methods[J].Materials,2021,14(21):6276.
• [34] Yan X C,Yin S,Chen C Y,et al.Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting[J].Journal of Alloys and Compounds,2018,764:1056-1071.
• [35] Ali H,Ma L,Ghadbeigi H,et al.In-situ residual stress reduction,martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of selective laser melted Ti6Al4V[J].Materials Science and Engineering A,2017,695:211-220.
• [36] Zhang M,Yang Y,Wang D,et al.Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting[J].Materials Science and Engineering A,2018,736:288-297.
• [37] Tsai M,Chen Y W,Chao C,et al.Heat-treatment effects on mechanical properties and microstructure evolution of Ti-6Al-4V alloy fabricated by laser powder bed fusion[J].Journal of Alloys and Compounds,2020,816:152615.
• [38] Sallica-Leva E,Caram R,Jardini A L,et al.,et al.Ductility improvement due to martensite α′ decomposition in porous Ti-6Al-4V parts produced by selective laser melting for orthopedic implants[J].Journal of the Mechanical Behavior of Biomedical Materials,2016,54:149-158.
• [39] Singla A K,Banerjee M,Sharma A,et al.Selective laser melting of Ti6Al4V alloy:Process parameters,defects and post-treatments[J].Journal of Manufacturing Processes,2021,64:161-187.
• [40] Galarraga H,Warren R J,Lados D A,et al.Effects of heat treatments on microstructure and properties of Ti-6Al-4V ELI alloy fabricated by electron beam melting (EBM)[J].Materials Science and Engineering A,2017,685:417-428.
• [41] Salem H,Carter L N,Attallah M M,et al.Influence of processing parameters on internal porosity and types of defects formed in Ti6Al4V lattice structure fabricated by selective laser melting[J].Materials Science and Engineering A,2019,767:138387.
• [42] Cui X,Zhang S,Zhang C H,et al.Additive manufacturing of 24CrNiMo low alloy steel by selective laser melting:Influence of volumetric energy density on densification,microstructure and hardness[J].Materials Science and Engineering A,2021,809:140957.
• [43] Zhang L,Zhu H H,Liu J H,et al.Track evolution and surface characteristics of selective laser melting Ti6Al4V[J].Rapid Prototyping Journal,2018,24(9):1554-1562.
• [44] Zhang L,Attar H.Selective laser melting of titanium alloys and titanium matrix composites for biomedical applications:A review[J].Advanced Engineering Materials,2016,18(4):463-475.
• [45] Fatemi A,Molaei R,Simsiriwong J,et al.Fatigue behaviour of additive manufactured materials:An overview of some recent experimental studies on Ti-6Al-4V considering various processing and loading direction effects[J].Fatigue & Fracture of Engineering Materials & Structures,2019,42(5):991-1009.
• [46] Oliveira J P,Santos T G,Miranda R M.Revisiting fundamental welding concepts to improve additive manufacturing:From theory to practice[J].Progress in Materials Science,2020,107:100590.
• [47] Hu Y N,Wu S C,Wu Z K,et al.A new approach to correlate the defect population with the fatigue life of selective laser melted Ti-6Al-4V alloy[J].International Journal of Fatigue,2020,136:105584.
• [48] Zheng Z P,Jin X,Bai Y C,et al.Microstructure and anisotropic mechanical properties of selective laser melted Ti6Al4V alloy under different scanning strategies[J].Materials Science and Engineering A,2022,831:142236.
• [49] Agius D,Kourousis K,Wallbrink C.A review of the as-built SLM Ti-6Al-4V mechanical properties towards achieving fatigue resistant designs[J].Metals,2018,8(1):75.
• [50] Simonelli M,Tse Y Y,Tuck C.Effect of the build orientation on the mechanical properties and fracture modes of SLM Ti-6Al-4V[J].Materials Science and Engineering A,2014,616:1-11.
• [51] Bartolomeu F,Gasik M,Silva F S,et al.Mechanical properties of Ti6Al4V fabricated by laser powder bed fusion:A review focused on the processing and microstructural parameters influence on the final properties[J].Metals,2022,12(6):986.
• [52] Liu Y,Pang Z C,Li M,et al.Investigation into the dynamic mechanical properties of selective laser melted Ti-6Al-4V alloy at high strain rate tensile loading[J].Materials Science and Engineering A,2019,745:440-449.
• [53] Sui Q,Li P Z,Wang K L,et al.Effect of build orientation on the corrosion behavior and mechanical properties of selective laser melted Ti-6Al-4V[J].Metals,2019,9(9):976.
• [54] Wysocki B,Maj P,Sitek R,et al.Laser and electron beam additive manufacturing methods of fabricating titanium bone implants[J].Applied Sciences,2017,7(7):657.
• [55] Chastand V,Quaegebeur P,Maia W,et al.Comparative study of fatigue properties of Ti-6Al-4V specimens built by electron beam melting (EBM) and selective laser melting (SLM)[J].Materials Characterization,2018,143:76-81.
• [56] Cao S,Chu R K,Zhou X G,et al.Role of martensite decomposition in tensile properties of selective laser melted Ti-6Al-4V[J].Journal of Alloys and Compounds,2018,744:357-363.
• [57] Carroll B E,Palmer T A,Beese A M.Anisotropic tensile behavior of Ti-6Al-4V components fabricated with directed energy deposition additive manufacturing[J].Acta Materialia,2015,87:309-320.
• [58] Vayssette B,Saintier N,Brugger C,et al.Surface roughness effect of SLM and EBM Ti-6Al-4V on multiaxial high cycle fatigue[J].Theoretical and Applied Fracture Mechanics,2020,108:102581.
• [59] Benedetti M,Fontanari V,Bandini M,et al.Low-and high-cycle fatigue resistance of Ti-6Al-4V ELI additively manufactured via selective laser melting:Mean stress and defect sensitivity[J].International Journal of Fatigue,2018,107:96-109.
• [60] Walker K F,Liu Q,Brandt M.Evaluation of fatigue crack propagation behaviour in Ti-6Al-4V manufactured by selective laser melting[J].International Journal of Fatigue,2017,104:302-308.
• [61] Liu Q C,Elambasseril J,Sun S J,et al.The effect of manufacturing defects on the fatigue behaviour of Ti-6Al-4V specimens fabricated using selective laser melting[J].Advanced Materials Research,2014,891-892:1519-1524.
• [62] Dallago M,Fontanari V,Winiarski B,et al.Fatigue properties of Ti6Al4V cellular specimens fabricated via SLM:CAD vs real geometry[J].Procedia Structural Integrity,2017,7:116-123.
• [63] Günther J,Krewerth D,Lippmann T,et al.Fatigue life of additively manufactured Ti-6Al-4V in the very high cycle fatigue regime[J].International Journal of Fatigue,2017,94:236-245.
• [64] Sun W B,Ma Y E,Huang W,et al.Effects of build direction on tensile and fatigue performance of selective laser melting Ti6Al4V titanium alloy[J].International Journal of Fatigue,2020,130:105260.
• [65] Yu H C,Li F Z,Wang Z M,et al.Fatigue performances of selective laser melted Ti-6Al-4V alloy:Influence of surface finishing,hot isostatic pressing and heat treatments[J].International Journal of Fatigue,2019,120:175-183.
• [66] Romero C,Yang F,Bolzoni L.Fatigue and fracture properties of Ti alloys from powder-based processes:A review[J].International Journal of Fatigue,2018,117:407-419.
• [67] Fotovvati B,Namdari N,Dehghanghadikolaei A.Fatigue performance of selective laser melted Ti6Al4V components:State of the art[J].Materials Research Express,2019,6(1):12002.
• [68] Masuo H,Tanaka Y,Morokoshi S,et al.Influence of defects,surface roughness and HIP on the fatigue strength of Ti-6Al-4V manufactured by additive manufacturing[J].International Journal of Fatigue,2018,117:163-179.
• [69] Karami K,Blok A,Weber L,et al.Continuous and pulsed selective laser melting of Ti6Al4V lattice structures:Effect of post-processing on microstructural anisotropy and fatigue behaviour[J].Additive Manufacturing,2020,36:101433.
• [70] Zhai Y D,Galarraga H,Lados D A.Microstructure,static properties,and fatigue crack growth mechanisms in Ti-6Al-4V fabricated by additive manufacturing:LENS and EBM[J].Engineering Failure Analysis,2016,69:3-14.
• [71] Lütjering G.Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys[J].Materials Science and Engineering A,1998,243(1):32-45.
• [72] Xu W,Lui E W,Pateras A,et al.In situ tailoring microstructure in additively manufactured Ti-6Al-4V for superior mechanical performance[J].Acta Materialia,2017,125:390-400.
• [73] Barriobero-Vila P,Gussone J,Haubrich J,et al.Inducing stable α + β microstructures during selective laser melting of Ti-6Al-4V using intensified intrinsic heat treatments[J].Materials (Basel),2017,10(3):268.
• [74] Kelly C N,Evans N T,Irvin C W,et al.The effect of surface topography and porosity on the tensile fatigue of 3D printed Ti-6Al-4V fabricated by selective laser melting[J].Materials Science and Engineering C,2019,98:726-736.

文章评论(Comment)：