赵卫民,王勇

• 1:中国石油大学机电工程学院

摘要(Abstract)：

采用超音速火焰喷涂(HVOF)方法在低碳钢表面制备NiCrBSi合金涂层,然后分别加热到300~900℃,保温10min,利用光学显微镜、SEM、EPMA和XRD等手段分析热处理对涂层组织的影响。结果显示,喷态涂层的组织在750℃开始发生变化,随着温度升高,未熔颗粒与周围区域间的界面不再清晰,850℃时微裂纹等连续缺陷被切断。奥氏体晶粒长大发生在900℃。喷态涂层中减少未熔颗粒可使涂层在较低热处理温度下获得封孔效果。

关键词(KeyWords)： 超音速火焰喷涂(HVOF);镍基合金;金属涂层;组织转变;热处理

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 赵卫民,王勇

参考文献(References)：

• [1]ZHAO Wei-Min,WANG Yong,DONG Li-Xian,et al.Corrosion mechanism of NiCrBSi coatings deposited by HVOF[J].Surf Coat Technol,2005,190:293-298.
• [2]Lee C H,Min K O.Effects of heat treatment on the microstructure and properties of HVOF-sprayed Ni-Cr-W-Mo-B alloy coatings[J].Surf Coat Technol,2000,132(1):49-57.
• [3]Blackford J R,Buckley R A,Jones H,et al.Spray deposition of an iron aluminide[J].J Mater Sci,1998,33(17):4417-4421.
• [4]Byoung Hee Kim,Dong Soo Suhr.Influence of fuel/oxygen ratio in HVOF spraying on the deposition of Cr3C2 coatings[J].Materials Transactions,2000,41(12):1657-1662.
• [5]Otsubo F,Era H,Uchida T,et al.Properties of Cr3C2-NiCr cermet coating sprayed by high power plasma and high velocity oxy-fuel processes[J].J ThermSpray Technol,2000,9(4):499-504.
• [6]Kazuo Hamashima,Yasuo Shinozaki,Mitumasa Sasaki.Thermal spraying of Mo2NiB2-Ni cermet[J].Advances in Powder Metallurgy and ParticulateMaterials,1997(1):243-252.
• [7]Okada R.Effect of heat treatment on characteristics of high velocity oxygen-fuel flame sprayed coatings(WC-27 mass%NiCr)[J].J Jpn Inst Met,1997,61(7):625-628.

文章评论(Comment)：