柴哲,张毅,李瑞卿,许倩倩,田保红,刘勇

• 1:河南科技大学材料科学与工程学院
• 2:有色金属共性技术河南省协同创新中心

摘要(Abstract)：

利用Gleeble-1500D热模拟试验机对Cu-Cr-Zr-Y合金进行高温等温压缩试验,变形温度和应变速率分别为650~850℃和0.001~10 s-1,对合金高温热压缩过程中的变形行为进行研究。结果表明:其流变应力随应变速率的提高而增大,随变形温度的升高而减小。并根据动态材料模型绘制和分析了该合金的热加工图,得出了热变形过程的最佳工艺参数为:温度为800~850℃,应变速率范围为0.001~0.1 s-1。

关键词(KeyWords)： Cu-Cr-Zr-Y合金;热压缩变形;流变应力;热加工图

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51101052);; 河南省高等学校青年骨干教师资助计划(2012GGJS-073);; 河南省教育厅自然科学研究计划(2011B430013);; 河南科技大学青年科学基金(2011QN48)

作者(Author): 柴哲,张毅,李瑞卿,许倩倩,田保红,刘勇

DOI: 10.13289/j.issn.1009-6264.2015.06.044

参考文献(References)：

• [1]刘平,康布熙,曹兴国,等.快速凝固Cu-Cr-Zr-Mg合金的时效析出与再结晶[J].中国有色金属学报,1999,9(2):241-246.LIU Ping,KANG Bu-xi,CAO Xing-guo,et al.Aging precipitation and recrystallization of rapidly solidified Cu-Cr-Zr-Mg alloy[J].The Chinese Journal of Nonferrous Metals,1999,9(2):241-246.
• [2]赵冬梅,董企铭,刘平,等.Cu-3.2Ni-0.75Si合金时效早期相变规律及强化机理[J].中国有色金属学报,2002,12(6):1167-1171.ZHAO Dong-mei,DONG Qi-ming,LIU Ping,et al.Transformation and strengthening of early stage of aging in Cu-3.2Ni-0.75Si alloy[J].The Chinese Journal of Nonferrous Metals,2002,12(6):1167-1171.
• [3]XIA Cheng-dong,JIA Yan-lin,ZHANG Wan,et al.Study of deformation and aging behaviors of a hot rolled-quenched Cu-Cr-Zr-Mg-Si alloy during thermomechanical treatments[J].Materials Design,2012,39:404-409.
• [4]Suzuki S,Shibutani N,Minura K,et al.Improvement in strength and electrical conductivity of Cu Ni Si alloy by aging and cold rolling[J].Journal of Alloys and Compounds,2006,417:116-120.
• [5]BI Li-ming,LIU Ping,CHEN Xiao-hong,et al.Analysis of phase in Cu-15%Cr-0.24%Zr alloy[J].Transactions of Nonferrous Metals Society of China,2013,23(5):1342-1348.
• [6]马旭,王顺兴,刘勇,等.变形量对Cu-Cr-Zr合金等温时效动力学的影响[J].热加工工艺,2010,38(8):10-12.MA Xu,WANG Shun-xing,LIU Yong,et al.Effect of deformation amount on isothermal aging kinetics of Cu-Cr-Zr alloy[J].Hot Working Technology,2010,38(8):10-12.
• [7]Jayakumar P K,Balasubramanian K,Rabindranath Tagore G.Recrystallisation and bonding behaviour of ultra fine grained copper and Cu-Cr-Zr alloy using ECAP[J].Materials Science and Engineer A,2012,538(15):7-13.
• [8]Hanzelka P,Musilova V,Kralik T,et al.Thermal conductivity of a Cu Cr Zr alloy from 5 K to room temperatures[J].Cryogenics,2010,50(11/12):737-742.
• [9]董企铭,苏娟华,刘平,等.Cu-Cr-Zr-Mg合金时效析出研究[J].材料热处理学报,2004,25(3):38-41.DONG Qi-ming,SU Juan-hua,LIU Ping,et al.Research on aging precipitation in a Cu-Cr-Zr-Mg alloy[J].Transactions of Materials and Heat Treatment,2004,25(3):38-41.
• [10]Zhang L,Li Z,Lei Q,et al.Hot deformation behavior of Cu-8.0Ni-1.8Si-0.15Mg alloy[J].Materials Science and Engineer A,2011,528(3):1641-1647.
• [11]Correia J B,Davies H A,Sellars C M.Strengthening in rapidly solidified age hardened Cu Cr and Cu Cr Zr alloys[J].Acta Materialia,1997,45(1):177-190.
• [12]Mu S G,Guo F A,Tang Y Q,et al.Study on the microstructure and properties of the aged Cu-Cr-Zr-Mg-RE alloy[J].Materials Science and Engineer A,2008,475(1/2):235-240.
• [13]Gronostajski Z.The deformation processing map for control of microstructure in Cu Al9.2Fe3 aluminium bronze[J].Journal of Materials Processing Technology,2002,125/126(9):119-124.
• [14]Momeni A,Dehghani K.Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps[J].Materials Science and Engineering A,2010,527:5467-5473.
• [15]Prasad Y V R K,Rao K P.Processing maps for hot deformation of rolled AZ31 magnesium alloy plate:Anisotropy of hot workability[J].Materials Science and Engineer A,2012,487(1/2):316-327.

文章评论(Comment)：