卜丽明,陈为为,林翔,李聪勃,王鲁

• 1:北京理工大学材料学院

摘要(Abstract)：

研究了电沉积Co-Cr3C2纳米复合涂层的热稳定性。析出相Cr3C2颗粒均匀弥散地分布在涂层中,质量分数大约为30%。600℃以上退火导致涂层当中形成孔隙。400℃以下和600℃以上退火分别有利于Co纳米晶粒沿[002]和[220]方向生长。低于400℃退火可以同时获得优异的耐磨性和高硬度。经低于400℃退火,涂层的摩擦系数达到0.12,而经200℃退火后的涂层的摩擦系数低至0.04。

关键词(KeyWords)： 涂层材料;金属基复合材料;化学合成;扩散;显微结构

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51401024);; 北京理工大学科技创新计划资助项目(GZ2013095101)

作者(Author): 卜丽明,陈为为,林翔,李聪勃,王鲁

DOI: 10.13289/j.issn.1009-6264.2015.03.036

参考文献(References)：

• [1]SHEN Pin-hua(沈品华).Electroplating Manual(现代电镀手册)[M].Beijing(北京):China Machine Press(机械工业出版社),2010.
• [2]Zoikis-Karathanasis A,Pavlatou E A,Spyrellis N.Pulse electrodeposition of Ni-P matrix composite coatings reinforced by Si C particles[J].Journal of Alloys and Compounds,2010,494(1/2):396-403.
• [3]Liu Y C,Liu L,Shen B,et al.A study of thermal stability in electrodeposited nanocrystalline Fe-Ni invar alloy[J].Materials Science and Engineering A,2011,528(18):5701-5705.
• [4]Ebrahimi F,Li H Q.Grain growth in electrodeposited nanocrystalline fcc Ni-Fe alloys[J].Scripta Materialia,2006,55(3):263-266.
• [5]Darling K A,Roberts A J,Mishin Y,et al.Grain size stabilization of nanocrystalline copper at high temperatures by alloying with tantalum[J].Journal of Alloys and Compounds,2013,573:142-150.
• [6]Huang R,Han Y.Structure evolution and thermal stability of SMAT-derived nanograined layer on Ti-25Nb-3Mo-3Zr-2Sn alloy at elevated temperatures[J].Journal of Alloys and Compounds,2013,554:1-11.
• [7]Wen C,Huang B,Chen Z,et al.Martensite and its reverse transformation in nanocrystalline bulk Co[J].Materials Science and Engineering A,2006,438-440:420-426.
• [8]Kajiwara S,Ohno S,Honma K.Martensitic transformation in ultra-fine particles of metals and alloys[J].Philosophical Magazine A,1991,63(4):625-644.
• [9]Hibbard G,Aust K T,Palumbo G,et al.Thermal stability of electrodeposited nanocrystalline cobalt[J].Scripta Materialia,2001,44(3):513-518.
• [10]Fan H J,Gsele U,Zacharias M.Formation of nanotubes and hollow nanoparticles based on kirkendall and diffusion processes:A review[J].Small,2007,3(10):1660-1671.
• [11]Nakamura R,Matsubayashi G,Tsuchiya H,et al.Formation of oxide nanotubes via oxidation of Fe,Cu and Ni nanowires and their structural stability:Difference in formation and shrinkage behavior of interior pores[J].Acta Materialia,2009,57(17):5046-5052.
• [12]Arun Prakash N,Gnanamoorthy R,Kamaraj M.Surface nanocrystallization of aluminium alloy by controlled ball impact technique[J].Surface and Coatings Technology,2012,210:78-89.
• [13]Mondal A K,Kumar S,Blawert C,et al.Effect of laser surface treatment on corrosion and wear resistance of ACM720 Mg alloy[J].Surface and Coatings Technology,2008,202(14):3187-3198.
• [14]Luo X T,Yang G J,Li C J.Multiple strengthening mechanisms of cold-sprayed c BNp/Ni Cr Al composite coating[J].Surface and Coatings Technology,2011,205(20):4808-4813.
• [15]Hou F Y,Wang W,Guo H T.Effect of the dispersibility of Zr O2nanoparticles in Ni-Zr O2electroplated nanocomposite coatings on the mechanical properties of nanocomposite coatings[J].Applied Surface Science,2006,252(10):3812-3817.

文章评论(Comment)：