王海军,付兵,项利,仇圣桃

• 1:钢铁研究总院连铸技术国家工程研究中心

摘要(Abstract)：

采用光学显微镜、EBSD观察并研究了普通取向硅钢组织、织构的演变特征。结果表明:热轧板组织及织构沿板厚方向存在不均匀性,一次冷轧后,组织发生了较大变化,完全转变为纤维带状条带组织。经840℃×10 min脱碳退火后初次再结晶晶粒平均尺寸为20.13μm,织构主要有{001}<010>、{111}<112>、以及Goss等织构,并可将碳脱至3.5×10-5以下。二次冷轧后,组织再次转变为纤维带状组织,织构类型与一次冷轧板织构类型类似,仅织构强度不同。经650℃×4 min回复时,冷轧组织发生了完全再结晶,再结晶晶粒平均尺寸为7.25μm。高温退火过程中,随着温度的升高,具有Goss位向的初次晶粒发生异常长大,温度到达1000℃时,晶粒尺寸达到厘米级,成品晶粒平均直径为18.92 mm,晶粒较为圆整,成品最佳磁感为1.885 T,铁损为1.21 W/kg。

关键词(KeyWords)： 普通取向硅钢;组织;织构;演变

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金委员会与上海宝山钢铁股份有限公司联合资助项目(50934009)

作者(Author): 王海军,付兵,项利,仇圣桃

DOI: 10.13289/j.issn.1009-6264.2016.02.016

参考文献(References)：

• [1]何忠治,赵宇,罗海文.电工钢[M].北京:冶金工业出版社,2012.
• [2]Xia Z X,Kang Y L,Wang Q L.Developments in the production of grain-oriented electrical steel[J].Journal of Magnetism and Magnetic Materials,2008,320(23):3229-3233.
• [3]Kubota T,Fujikura M,Ushigami Y.Recent progress and future trend on grain-oriented silicon steel[J].Journal of Magnetism and Magnetic Materials,2000,215:69-73.
• [4]杨续跃,朱亚坤,张雷.热变形镁合金退火显微组织的定量研究[J].材料研究学报,2010,24(2):169-174.YANG Xu-yao,ZHU Ya-kun,ZHANG Lei,Quantitative studies of the microstructure of hot deformed magnesium alloy[J].Chinese Journal of Materials Research,2010,24(2):169-174.
• [5]孔祥宇,李敬,于翠翠,等.横轧3105铝合金织构演变的定量分析[J].中国有色金属学报,2009,19(11):1917-1922.KONG Xiang-yu,LI Jing,YU Cui-cui,et al.Quantitative analysis of texture evolution in cross-rolled 3105 aluminum alloy[J].The Chinese Journal of Nonferrous Metals,2009,19(11):1917-1922.
• [6]Liu W C,Yuan H,Huang M J,et al.Quantifying the recrystallization of cold rolled AA3015 aluminum alloy by X-ray diffraction[J].Materials Science and Engineering A,2009,524(1):168-175.
• [7]姚旭升,刘沿东,左良.冷拔珠光体钢丝帘线中织构演变的定量研究[J].钢铁,2008,43(3):65-67.YAO Xu-sheng,LIU Yan-dong,ZUO Liang.Quantitative texture analysis of cold drawn pearlitic steel wires[J].Iron and Steel,2008,43(3):65-67.
• [8]吴桂林,刘伟,Godfrey A,等,柱状晶Al在冷轧过程中微观组织演变的定量表征—Ⅱ.微观分裂[J].金属学报,2004,40(7):709-715.WU Gui-lin,LIU Wei,Godfrey A,et al.Microstructural evolution of columnar grain Al during cold rolling[J].Acta Metallurgica Sinica,2004,40(7):709-715.
• [9]Gerber P,Tarasiuk J,Chauveau T,et al.A quantitative analysis of the evolution of texture and stored energy during annealing of cold rolled copper[J].Acta Materialia,2003,51(20):6359-6371.
• [10]董廷亮,项利,岳尔斌,等,TSCR流程试制取向硅钢的组织演变[J].钢铁研究学报,2010,22(7):56-58.DONG Ting-liang,XIANG Li,YUE Er-bin,et al.Microstructure development of grain oriented silicon steel produced by thin slab casting and rolling process[J].Journal of Iron and Steel Research,2010,22(7):56-58.
• [11]李军,赵宇,赵沛.低温板坯加热取向硅钢织构演变过程研究[C]∥2010第11届中国电工钢专业学术年会论文集,2010:161-166.LI Jun,ZHAO Yu,ZHAO Pei.Oriented silicon steel slab heating temperature evolution of texture[C]∥The 11th China Electrical Steel Annual Conference Professional Proceedings,2010,2010:161-166.
• [12]刘刚,齐克敏,王福,等,剪切变形方式对取向硅钢织构和磁性的影响[J].钢铁,2000,35(4):40-43.LIU Gang,QI Ke-min,WANG Fu,et al.Effect of shear deformation on textures and magnetic properties of grain oriented silicon steel[J].Iron and Steel,2000,35(4):40-43.
• [13]张贞贞,任卫,方建锋.低温板坯加热取向3%硅钢热轧板的研究[J].特殊钢,2011,32(1):67-70.ZHANG Zhen-zhen,REN Wei,FANG Jian-feng,A study on texture in hot rolled plate of grain-oriented 3%Si steel with slab reheating at low temperature[J].Special Steel,2011,32(1):67-70.

文章评论(Comment)：