靳晓坤,郑申白,徐勇,张士宏

• 1:河北联合大学冶金与能源学院
• 2:中国科学院金属研究所

摘要(Abstract)：

观察了铸轧AZ31镁合金板材经不同异步比轧后试样的显微组织。结果表明,与同步轧制相比,异步轧制能显著降低AZ31镁合金的动态再结晶温度,细化晶粒,并且提高其低温轧制时的成形能力,无需中间退火处理即可制备出最终厚度为0.7 mm的镁合金薄板。同时,异步轧制能够明显减弱板材的基面织构,但其强度并不随异步比增加呈现明显的单调递减规律。

关键词(KeyWords)： AZ31镁合金;异步轧制;动态再结晶;显微组织;织构

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51174189,51304186)

作者(Author): 靳晓坤,郑申白,徐勇,张士宏

DOI: 10.13289/j.issn.1009-6264.2014.09.025

参考文献(References)：

• [1]陈振华,夏伟军,严红革,等.变形镁合金[M].北京:化学工业出版社,2005.
• [2]杨平,孟利,毛为民,等.利用道次间退火改善镁合金轧制成形性的研究[J].材料热处理学报,2005,26(2):34-38.YANG Ping,MEMG Li,MAO Wei-min,et al.Improvement of formability of magnesium alloys by pass interval annealing during rolling[J].Transactions of Materials and Heat Treatment,2005,26(2):34-38.
• [3]夏伟军,蔡建国,陈振华,等.异步轧制AZ31镁合金的微观组织与室温成形性能[J].中国有色金属学报,2010,20(7):1247-1253.XIA Wei-jun,CAI Jian-guo,CHEN Zhen-hua,et al.Microstructure and room temperature formability of AZ31 magnesium alloy produced by differential speed rolling[J].The Chinese Journal of Nonferrous Metals,2010,20(7):1247-1253.
• [4]张丁非,方霖,刘郭平,等.镁合金板材轧制技术与工艺的研究进展[J].兵器材料科学与工程,2010,33(5):96-101.ZHANG Ding-fei,FANG Lin,LIU Guo-ping,et al.Research progress in rolling technology and process for magnesium alloy sheets[J].Ordnance Material Science and Engineering,2010,33(5):96-101.
• [5]戴辉,孙蓟泉,唐荻,等.带钢异步冷轧及退火行为的研究[J].材料热处理学报,2011,32(7):89-95.DAI Hui,SUN Ji-quan,TANG Di,et al.Research on asymmetrical cold rolling and annealing behavior of strip steel[J].Transactions of Materials and Heat Treatment,2011,32(7):89-95.
• [6]王忠堂,宋广胜,张士宏,等.异步轧制AZ31镁合金板材的孪晶组织及织构[J].材料热处理学报,2013,34(10):62-66.WANG Zhong-tang,SONG Guang-sheng,ZHANG Shi-hong,et al.Twins and texture of AZ31 magnesium alloy sheet by asynchronous rolling[J].Transactions of Materials and Heat Treatment,2013,34(10):62-66.
• [7]曲家慧,张正贵,王福,等.AZ31镁合金室温异步轧制的织构演变[J].材料研究学报,2007,21(4):354-358.QU Jia-hui,ZHANG Zheng-gui,WANG Fu,et al.Evolution of texture of the AZ31 magnesium alloy by the cross shear rolling at room temperature[J].Chinese Journal of Materials Research,2007,21(4):354-358.
• [8]李振,蔡庆伍,江海涛,等.异速比对异步轧制AZ31镁合金板材组织和织构的影响[J].北京科技大学学报,2010,32(8):1017-1022.LI Zhen,CAI Qing-wu,JIANG Hai-tao,et al.Effects of differential speed ratio on the microstructure and texture of AZ31 magnesium alloy sheets processed by differential speed rolling[J].Journal of University of Science and Technology Beijing,2010,32(8):1017-1022.
• [9]Myagchilov S,Dawson P R.Evolution of texture in aggregates of crystals exhibiting both slip and twinning[J].Modeling and Simulation in Materials Science and Engineering,1999,7(6):975-1004.
• [10]Prado M T,Vauje J A,Ruano O A.Effect of sheet thickness on the microstructure evolution of an Mg AZ61 alloy during large strain hot rolling[J].Scripta Materialia,2004,50(5):667-671.
• [11]张文玉,刘先兰.异步轧制技术及其在镁合金中的应用[J].锻压技术,2008,33(2):1-5.ZHANG Wen-yu,LIU Xian-lan.Differential speed rolling technology and its application in magnesium alloys[J].Forging&Stamping Technology,2008,33(2):1-5.
• [12]Sun H Q,Shi Y N,Zhang M X,et al.Plastic strain-induced grain refinement in the nanometer scale in a Mg alloy[J].Acta Materialia,2007,55(3):975-982.
• [13]Kaibyshev R,Sitdikov O.Dynamic recrystallization of magnesium at ambient temperature[J].Z Metallkd,1994,85:738-743.
• [14]陈振华,夏伟军,程永奇,等.镁合金织构与各向异性[J].中国有色金属学报,2005,15(1):1-11.CHEN Zhen-hua,XIA Wei-jun,CHENG Yong-qi,et al.Texture and anisotropy in magnesium alloys[J].The Chinese Journal of Nonferrous Metals,2005,15(1):1-11.

文章评论(Comment)：