郝世明,谢敬佩,王爱琴,王文焱,李继文

• 1:河南科技大学物理工程学院
• 2:有色金属共性技术河南省协同创新中心
• 3:河南科技大学材料科学与工程学院

摘要(Abstract)：

为了研究微米级碳化硅颗粒(SiCp)尺寸和含量对中体积分数SiCp增强铝基复合材料强化机制的影响,用粉末冶金工艺制备SiCp体积分数为30%~40%,颗粒尺寸为3~40μm的SiCp/2024Al复合材料,利用TEM,万能材料试验机等对材料微观结构和拉伸性能进行了研究。结果表明,复合材料的抗拉强度和硬度均随着SiC颗粒尺寸的增大而减小,随体积分数的增加而增大。复合材料的强化是由多种强化机制协同作用的结果,SiC颗粒尺寸主要通过位错强化和细晶强化显著影响对复合材料的强化效果。

关键词(KeyWords)： 铝基复合材料;SiC颗粒;强化机制;颗粒尺寸;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51371077);; 河南省基础与前沿研究计划(152300410204);; 河南省高等学校重点科研项目(16A140007);; 河南科技大学高级别科研项目培育基金(2015GJB009);河南科技大学重大科技项目培育基金(2015 ZDXM01)

作者(Author): 郝世明,谢敬佩,王爱琴,王文焱,李继文

DOI: 10.13289/j.issn.1009-6264.2016.05.001

参考文献(References)：

• [1]Geiger A L,Walker J A.The processing and properties of discontinuously reinforced aluminum composites[J].JOM,1991(8):8-15.
• [2]Alexander E,Christopher S M,Andreas M.Metal Matrix Composites in Industry:An Introduction and a Survey[M].Norwell:Kluwer Academic Publishers,2003.
• [3]Maruyama B,Hunt W H.Discontinuously reinforced aluminum:current status and future direction[J].JOM,l999(11):59-61.
• [4]Jerome P.Commercial success for MMCs[J].Powder Metall,1998,41(1):25-26.
• [5]Mark H.AMC:Leading edge MMCs and powder materials[J].Powder Metall,1997,40(2):102-103.
• [6]Cui Yan,Wang Lifeng,Ren Jianyue.Multi-functional Si C/Al composites for aerospace applications[J].Chinese Journal of Aeronautics,2008,21(6):578-584
• [7]Hirth J P.Introduction to the viewpoint set on the mechanical properties of aluminum matrix-particulate composites[J].Scripta Metallurgica et Materialia,1991,25(1):1-2.
• [8]Miller W S,Humphreys F J.Strengthening mechanisms in particulate metal matrix composites[J].Scripta Metallurgica et Materialia,1991,25(1):33-38.
• [9]Doel T J A,Bowen P.Tensile properties of particulate-reinforced metal matrix composites[J].Composites Part A:Applied Science and Manufacturing,1996,27(8):655-665.
• [10]Yang J,Cady C,Hu M S,et al.Effects of damage on the flow strength and ductility of a ductile Al alloy reinforced with Si C particulates[J].Acta Metallurgica et Materialia,1990,38(12):2613-2619.
• [11]Srivastava V C,Schneider A,Uhlenwinkel V,et al.Spray processing of 2014-Al+Si C P composites and their property evaluation[J].Materials Science and Engineering A,2005,412(1):19-26.
• [12]Arsenault R J,Fishman S,Taya M.Deformation and fracture behavior of metal-ceramic matrix composite materials[J].Progress in Materials Science,1994,38:1-157.
• [13]肖伯律,毕敬,赵明久,等.Si Cp尺寸对铝基复合材料拉伸性能和断裂机制的影响[J].金属学报,2002,38(9):1006-1008.XIAO Bo-lü,BI Jing,ZHAO Ming-jiu,et al.Effects of Si Cp size on tensile property of aluminum matrix composites fabricated by powder metallurgical method[J].Acta Metallurgica Sinica,2002,38(9):1006-1008.
• [14]Taya M.Strengthening mechanisms of metal matrix composites[J].Materials Transactions,1991,32(1):1-19.
• [15]Nardone V C,Prewo K M.On the strength of discontinuous silicon carbide reinforced aluminum composites[J].Scripta Metallurgica,1986,20(1):43-48.
• [16]Miller W S,Humphreys F J.Strengthening mechanisms in particulate metal matrix composites[J].Scripta Metallurgica et Materialia,1991,25(1):33-38.
• [17]Ribes H,Da Silva R,Suery M,et al.Effect of interfacial oxide layer in Al-Si C particle composites on bond strength and mechanical behavior[J].Materials Science and Technology,1990,6(7):621-628.
• [18]Ashby M F.Work hardening of dispersion-hardened crystals[J].Philosophical Magazine,1966,132(14):1157-1178.
• [19]Starink M J,Wang P,Sinclair I,et al.Microstructure and strengthening of Al-Li-Cu-Mg alloys and MMCs:II.Modelling of yield strength[J].Acta Materialia,1999,47(14):3855-3868.
• [20]Song M,Li X,Chen K H.Modeling the age-hardening behavior of Si C/Al metal matrix composites[J].Metallurgical and Materials Transactions A,2007,38(3):638-648.

文章评论(Comment)：