曹光明,石发才,孙彬,何永全,刘振宇

• 1:东北大学轧制与连轧自动化国家重点实验室
• 2:太原钢铁(集团)有限公司
• 3:沈阳大学机械工程学院

摘要(Abstract)：

采用热模拟试验机研究了不同温度和等温时间下汽车大梁钢表面形成的FeO层的等温转变行为,结合实验结果绘制出510L,610L钢的氧化铁皮的等温转变曲线。结果表明,两个钢种FeO层的等温转变均遵循"C"曲线规律,510L钢的FeO层发生先共析转变的"鼻温"范围为450~550℃,而共析转变的"鼻温"范围为350~450℃;610L钢FeO层发生先共析转变和共析转变的"鼻温"范围分别为350~400℃和350~450℃,610L钢的共析和先共析转变比510L的更加困难。随Fe3O4含量减少,脱落形式由粉末状脱落向片状脱落过渡。结合研究结果得出最优热轧氧化铁皮结构为以Fe3O4为主,其含量控制在60%左右,少量FeO在Fe3O4中成均匀的岛状分布,并确定了控制氧化铁皮结构的工艺,即精轧开轧温度为1000~1030℃,终轧温度为870~920℃,卷取温度为570~630℃。

关键词(KeyWords)： 氧化铁皮;等温转变;剥离行为;冷加工;卷取温度

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51204047);; 国家科技支撑计划课题(2011BAE13B04)

作者(Author): 曹光明,石发才,孙彬,何永全,刘振宇

DOI: 10.13289/j.issn.1009-6264.2014.11.030

参考文献(References)：

• [1]王国栋,刘相华.日本热轧带钢技术的发展和现状[J].轧钢,2007,24(1):1-6.WANG Guo-dong,LIU Xiang-hua.Development and current situation of hot strip rolling technology in japan[J].Steel Rolling,2007,24(1):1-6.
• [2]Kashiwazaki K,Ogura T,Urabe T.Mannufacture of checkered steel plate having tight scale:Japan,JP10235424[P].1997.
• [3]关闯,李建国,李俊,等.热轧钢板免酸洗直接冷轧还原退火[J].材料热处理学报,2012,33(7):143-146.GUANG Chuang,LI Jian-guo,LI Jun,et al.Hydrogen gas reduction of oxide scale of hot rolled steel after cold rolling[J].Transactions of Materials and Heat Treatment,2012,33(7):143-146.
• [4]孙彬,曹光明,刘振宇,等.不同热连轧工艺参数条件下三次氧化铁皮的分析[J].物理测试,2010,28(6):1-5.SUN Bin,CAO Guang-ming,LIU Zhen-yu,et al.Analysis of tertiary oxide scale with different hot rolling processes parameters[J].Physics Examination and Testing,2010,28(6):1-5.
• [5]Chen R Y,Yuen W Y D.Oxide scale structures formed on commercial hot-rolled steel strip and their formation mechanisms[J].Oxidation of Metals,2001,56(1/2):111-112.
• [6]周贤良,周伟,华小珍,等.加热气氛中氧浓度对热轧带钢氧化皮结构及耐蚀性的影响[J].材料热处理学报,2010,31(7):134-139.ZHOU Xian-liang,ZHAO Wei,HUA Xiao-zhen,et al.Influence of oxygen concentration in heating atmosphere on structure and corrosion resistance of oxide scales formed on hot rolled steel strip[J].Transactions of Materials and Heat Treatment,2010,31(7):134-139.
• [7]Paidassi J.The precipitation of Fe3O4in scales formed by oxidation of iron at elevated temperature[J].Acta Metallurgica 1955,3(4):447-451.
• [8]Chen R Y,Yuen W Y D.A study of the scale structure of hot-rolled steel strip by simulated coiling and cooling[J].Oxidation of Metals,1999,53(5/6):539-560.
• [9]Matsunga S,Homma T.Influence on the oxidation kinetics of metals by control of structure of oxidation scales[J].Oxidation of Metals,1976,10(6):361-376.
• [10]Baud J,Ferrier A,Manenc J,et al.The oxidation and decarburizing of Fe-C alloys in air and the influence of relative humidity[J].Oxidation of Metals,1975,9(1):69-97.
• [11]刘振宇,于洋,郭晓波,等.带热连轧中氧化铁皮的控制技术[J].轧钢,2009,26(1):1-5.LIU Zhen-yu,YU Yang,GUO Xiao-bo,et al.Techniques of oxide scales control during hot strip rolling[J].Steel Rolling,2009,26(1):1-5.
• [12]李铁藩.金属晶界在高温氧化中的作用[J].中国腐蚀与防护学报,2002,22(3):180-183.LI Tie-pan.The role of metallic grain boundary in high temperature oxidation[J].Journal of Chinese Society for Corrosion and Protection,2002,22(3):180-183.
• [13]Bhattacharya R,Jha G.,Kundu S,et al.Influence of cooling rate on the structure and formation of oxide scale in low carbon steel wire rods during hot rolling[J].Surface and Coatings Technology,2006,201(1):526-532.
• [14]Matsuno F.Blistering and hydraulic removal of scale films of rimmed steel at high temperature[J].ISIJ International,1980,20(2):413-421.

文章评论(Comment)：