轧制及热处理对WE43镁合金组织和性能的影响Effect of rolling and heat treatment on mechanical properties and microstructure of WE43 magnesium alloy
余琨,黎文献,王日初,王渤,李超
摘要(Abstract)：
用硬度检测、拉伸实验、X射线、光学显微镜和TEM观察等方法,测试分析了WE43镁合金铸态、轧制态、T5和T6热处理态时的性能和显微组织等。结果表明:WE43镁合金经过轧制和T5热处理后硬度和强度都有大幅度的提高。轧制后的WE43合金在强度上表现出明显的各向异性,垂直轧制方向的屈服强度要比沿轧制方向的屈服强度低。WE43合金轧制后进行T5处理,其强度要比T6处理强度明显要高,这与在T5状态下合金中析出强化相分布更加密集和细小有关。
关键词(KeyWords)： WE43;镁合金;轧制;热处理
基金项目(Foundation):
作者(Author): 余琨,黎文献,王日初,王渤,李超
参考文献(References)：
- [1]ASM International.Magnesium and magnesium alloy[M].Ohio:Metal Park,1999.
- [2]Polmear I J.Light Alloys:metallurgy of light metals[M],2nd.London:Edward Arnold,1989:210.
- [3]黎文献.镁及镁合金[M].长沙:中南大学出版社,2005:352.
- [4]Mordike B L,Ebert T.Magnesium:properties-applications-potential[J].Mater Sci Eng A,2001,302:37-45.
- [5]Sanchez C,Octor H,Nussbaum G.Elevated temperature behaviour of rapidly solidified magnesium alloys containing rare earths[J].Materials Science andEngineering A,1996,221:48.
- [6]Cahn R W.Microstructures and properties of nonferrous alloys[M].Beijing:Science Press,1999.
- [7]Kainer K U.Magnesium alloy and technology[M].Weinheim:Wiley-VCH Verlag Gmbh&Co KgaA,2003:1.
- [8]Smola B,StulíkováI,Von Buch F.Structural aspects of high performance Mg alloys design[J].Mater Sci Eng A,2002,324:113.
- [9]Matsuura,Makoto Sakurai Masaki.Local structures around Zn and Y in the melt-quenched Mg97Zn1Y2ribbon[J].Journal of Alloys and Compounds,2003,353:240.
- [10]Galiyev A,Kaibyshev R.Superplasticity in a magnesium alloy subjected to isothermal rolling[J].Scripta Materialia,2004,51:89.
文章评论(Comment)：
|
||||||||||||||||||
|
||||||||||||||||||