李冬升,戴起勋,程晓农,邵新中,王国建

• 1:江苏大学材料科学与工程学院
• 2:江苏银环精密钢管股份有限公司

摘要(Abstract)：

在理论研究和试验的基础上,结合各研究者实验数据和作者的大量研究结果,研究了奥氏体不锈钢室温强度和塑性与合金元素的变化规律,经计算机处理得到了室温强度、伸长率的定量计算的表达式。

关键词(KeyWords)： 奥氏体不锈钢;力学性能;塑性;模拟

Abstract:

Keywords:

基金项目(Foundation): 国家“十二”五“863”重大项目(2012AA03A501);; 江苏省科技成果转化项目(BA2010053);; 省级重点实验室开放课题(kjsmcx1004)

作者(Author): 李冬升,戴起勋,程晓农,邵新中,王国建

DOI: 10.13289/j.issn.1009-6264.2012.s1.025

参考文献(References)：

• [1]LI Dong-Sheng,CHEN Xi-Zhang,DAI Qi-Xun.Calculation and analysis of microstructure of austenitic steel for supercritical unit[J].AppliedMechanics and Materials,2011,84-85:337-341.
• [2]Dai Q X,Wang A D,Cheng X N,et al.Stacking fault energy of cryogenic austenite steels[J].Chinese Physics,2002,11(6):596-600.
• [3]Dai Qixun,Cheng Xiaonong,Luo Xingming et al.Structural parameters of martensite transformation for austenitic steels[J].Mater Charact,2003,49(4):367.
• [4]Dai Q X,Yuan Z Z,Cheng X N,et al.Numerical simulation of nitride age-precipitation in high nitrogen stainless steels[J].Mater Sci Eng A,2004,385:445-448.
• [5]肖纪美.不锈钢的金属学问题(二版)[M].北京:冶金工业出版社,2006.
• [6]Kamachi Mudali U,Baldev Raj.高氮钢和不锈钢——生产、性能与应用[M].李晶,黄运华,译.北京:化学工业出版社,2006.
• [7]俞德刚.钢的强韧化理论与设计[M].上海:上海交通大学出版社,1990.
• [8]赵进刚,张宝伟,王明林.高强度奥氏体不锈钢的发展[J].材料开发与应用,2005,8:38-40.ZHAO Jin-gang,ZHANG Bao-wei,WANG Ming-lin.Development of high strength austenitic stainless steel[J].Development and Application ofMaterials,2005,8:38-40.
• [9]陆世英,张廷凯,康喜范,等.不锈钢[M].北京:原子能出版社,1998.
• [10]程晓农,李丹,戴起勋,等.超临界锅炉用奥氏体不锈钢工艺与组织的计算分析[J].江苏大学学报,2009,30(5):475-478.CHENG Xiao-nong,LI Dan,DAI Qi-xun,et al.Analysis on heat treatment process and microstucture of stainless steel used for ESC boiler[J].Journalof Jiangsu University.Natural Science Edition,2009,30(5):475-478.
• [11]程晓农,戴起勋.奥氏体钢设计与控制[M].北京:国防工业出版社,2005.
• [12]Peckner D,Bernsterain I M.不锈钢手册[M].顾守仁,译.北京:机械工业出版社,1987.
• [13]Tobler R L,Meyn D.Cleavage-like fracture along slip planes in Fe-18Cr-3Ni-13Mn-0.37N austenitic stainless steel at liquid helium temperature[J].Metall Trans A,1988,19:1626-1631.
• [14]Reed R P,Tobler R L,Elmer J M,et al.Strength and toughness of USSR Fe-20Cr-16Ni-6Mn-0.2N weldments at cryogenic temperature[C]//RizzutoC.Proceedings of Eighth International Cryogenic Engineering Conference(ICEC8),Geneva.IPC Science and Technology Press,1980:797-801.
• [15]张彦生,师昌绪.铁-锰-铝系奥氏体钢——耐热钢、无磁钢和低温钢[J].金属学报,1964,7(3):285-300.ZHANG Yan-sheng,SHI Chang-xu.A study on Fe-Mn-Al austenitic steels[J].Acta Metallurgica Sinica,1964,7(3):285-300.
• [16]孙玉梅,邹小平.Super304H不锈钢锅炉管评述[J].锅炉技术,2007,38(1):52-55.SUN Yu-mei,ZOU Xiao-ping.The comment of super 304 h stainless steel boiler tube[J].Boiler Technology,2007,38(1):52-55.
• [17]周勇,朗宇平,荣凡,等.奥氏体不锈钢15Mn-22Cr-0.56N的热塑性和轧制工艺对其性能的影响[J].特殊钢,2008,29(1):22-24.ZHOU Yong,LANG Yu-ping,RONG Fan,et al.Hot plasticity of austenite stainless steel 15Mn-22 Cr-0.56N and effect of rolling process on propertiesof steel[J].Special Steel,2008,29(1):22-24.
• [18]Jiao F,sterle W,Portella P D,et al.Biaxial path-dependence of low-cycle fatigue behavior and microstructure of alloy 800H at room temperature[J].Mater Sci&Eng A,1995,196;19-24
• [19]Dehmolaei R,Shamanian M,Kermanpar A.Microstructural changes and mechanical properties of Incoloy 800 after 15years service[J].Mater Charac,2009,60(3):246-250.
• [20]马玉喜,荣凡,周荣,等.超高氮奥氏体钢的韧-脆转变[J].钢铁,2008,43(2):89-92.MA Yu-xi,RONG Fan,ZHOU Rong,et al.Ductile to brittle transition of super-high nitrogen austenitic sainless steel[J].Iron and Steel,2008,43(2):89-92.
• [21]胡本芙,鹿林,贾成厂.(C+N)复合强化的Fe-Cr-Mn(W,V)钢高温性能的研究[J].钢铁,2000,35(3):46-51.HU Ben-fu,LU Lin,JIA Cheng-chang.Research on the high tem perature strength and ductility of(C+N)complex strengthening Fe-Cr-Mn(W,V)steels[J].Iron and Steel,2000,35(3):46-51.
• [22]赵朴.化学成分和固溶温度对1Cr17Mn9Ni4N不锈钢组织和性能的影响[J].钢铁研究学报,2003,15(3):21-24.ZHAO Pu.Effects of composition and solusition-annealing temperature on microstructure and mechanical properties of stainless steel 1Cr17Mn9Ni4N[J].Journal of Iron and Steel Research,International,2003,15(3):21-24.
• [23]手册编委会.火力电厂金属材料手册.北京:中国电力出版社,2001.
• [24]徐祖耀.Fe-X系马氏体相变的热力学[J].金属学报.1980,16(4):420-4.25.XU Zu-yao.Thermodynamics of the martensitic transformation in Fe-X systems[J].Acta Metallurgica Sinica,1980,16(4):420-425.
• [25]Dai Q X,Yang R Z.The calculation of Tδand Vδin austenitic steel[J].Mater Charac,1997,38(3):129-133.
• [26]Dai Q X,Cheng X N,Zhao Y T,et al.Design of martensite transformation temperature by calculation for austenitic steels[J].Mater Charact,2004,52:349-354.

文章评论(Comment)：