胡浙梁,王晓东,王利,戎咏华

• 1:上海交通大学材料科学与工程学院
• 2:宝山钢铁股份有限公司技术研究院

摘要(Abstract)：

为了提高钢的综合强塑性能,根据徐祖耀提出的淬火-分配-回火(Q-P-T)热处理新工艺,即在Fe-Mn-Si-C钢中加入合金元素Nb和V,利用碳化物弥散析出强化,开发出了性能比Q&P钢更为优越的Q-P-T钢,证实了Q-P-T工艺设想的预期结果。通过微观结构和力学性能表征着重研究了淬火温度对残留奥氏体含量和性能的影响,从而获得了试验钢最佳的淬火温度。

关键词(KeyWords)： 淬火-分配-回火(Q-P-T)钢;热处理;力学性能;残留奥氏体;淬火温度

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50771110)

作者(Author): 胡浙梁,王晓东,王利,戎咏华

DOI: 10.13289/j.issn.1009-6264.2010.04.016

参考文献(References)：

• [1]Powers W F.Automotive materials in the21st century[J].Advanced Mater Processes,2000,157(5):38-41.
• [2]Senuma T.Physical metallurgy of modern high strength steel sheets[J].ISIJ Inter,2001,41(6):520-532.
• [3]Horvath C D,Fekete J R.Opportunities and challenges for increased usage of advanced high strength steels in automotive applications[C]∥Baker M A.Proceedings of International Conference on Advanced High Strength Sheet Steels for Automotive Applications.Warrendale PA:AIST,2004:3-10.
• [4]Speer J,Matlock D K,De Cooman B C,et al.Carbon partitioning into austenite after martensite transformation[J].Acta Material,2003,51(9):2611-2622.
• [5]Matlock D K,Brutigam V E,Speer J G.Application of the quenching and partitioning(Q&P)process to a medium-carbon high Si microalloyed bar steel[J].Mater Sci Forum,2003,426-4:1089-1094.
• [6]Speer J,Streicher A M,Matlock D K,et al.Quenching and partitioning:A fundamentally new process to create high strength trip sheet microstructures[C]∥Damm E B,Merwin M.Austenite Formation and Decomposition.Warrendale PA:TMS-ISS,2003:505-522.
• [7]Streicher A M,Speer J G,Matlock D K,et al.Quenching and partitioning response of a Si-Added TRIP sheet steel[C]∥Baker M A.Proceedings of International Conference on Advanced High Strength Sheet Steels for Automotive Applications.Warrendale PA:AIST,2004:51-62.
• [8]Speer J,Matlock D K,Rizzo F C,et al.Partitioning of carbon from supersaturated plates of ferrite with application to steel processing and fundamentals of the bainite transformation[J].Current Opinion in Solid State and Mater Sci,2004,8(3-4):219-237.
• [9]Hsu T Y(Xu Zuyao).Design of structure,composition and heat treatment process for high strength steel[J].Mater Sci Forum,2007,561-565:2283-2286.
• [10]WANG X D,ZHONG N,RONG Y H,et al.Novel ultra-high strength nano-lath martensitic steel by quenching-partitioning-tempering process[J].Journal of Materials Research,2009,24(1):260-267.
• [11]Edmonds D V,Rizzo F C,De Cooman B C,et al.Quenching and partitioning martensite-A novel steel heat treatment[J].Mater Sci Eng A,2006,438-440:25-34.
• [12]胡浙梁.新型Q-P-T钢中的残余奥氏体研究[D].上海交通大学,2008.
• [13]WANG X D,HUANG B X,WANG L,et al.Microstructure and mechanical properties of microalloyed high-strength transformation-induced plasticity steels[J].Metall Mater Trans A,2008,39(1):1-7.

文章评论(Comment)：