张毅,李瑞卿,许倩倩,田保红,刘勇,刘平,陈小红

• 1:河南科技大学材料科学与工程学院
• 2:有色金属共性技术河南省协同创新中心
• 3:上海理工大学材料科学与工程学院

摘要(Abstract)：

在Gleeble-1500D热模拟试验机上对Cu-Cr-Zr合金在应变速率为0.001~10 s-1、变形温度为650~850℃的高温变形过程中的流变应力行为进行了研究。利用光学显微镜分析了合金在热变形过程中的组织演变及动态再结晶机制。结果表明:流变应力随变形温度的升高而减小,随应变速率的提高而增大。升高变形温度以及降低应变速率,均有利于Cu-Cr-Zr合金的动态再结晶发生。从流变应力、应变速率和温度的相关性,得出了该合金高温热压缩变形时的热变形激活能Q为392.5 kJ/mol,同时利用逐步回归的方法建立了该合金的流变应力方程。

关键词(KeyWords)： Cu-Cr-Zr合金;高温压缩;热激活能;流变应力方程;动态再结晶

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51101052);; 河南省高等学校青年骨干教师资助计划(2012GGJS-073);; 河南省教育厅自然科学研究计划(2011B430013);; 河南科技大学青年科学基金(2011QN48)

作者(Author): 张毅,李瑞卿,许倩倩,田保红,刘勇,刘平,陈小红

DOI: 10.13289/j.issn.1009-6264.2014.05.015

参考文献(References)：

• [1]雷静果,刘平,赵冬梅,等.用导电率研究Cu-Ni-Si-Cr合金时效早期相变动力学[J].材料热处理学报,2003,24(4):22-25.LEI Jing-guo,LIU Ping,ZHAO Dong-mei,et al.Study on the transformation kinetics of early stage aging of Cu-Ni-Si alloy by measuring the electric conductivity[J].Transactions of Materials and Heat Treament,2003,24(4):22-26.
• [2]XIA Cheng-dong,JIA Yan-lin,ZHANG Wan,et al.Study of deformation and aging behaviors of a hot rolled-quenched Cu-Cr-Zr-Mg-Si alloy during thermomechanical treatments[J].Materials Design,2012,39:404-409.
• [3]SU Juan-hua,DONG Qi-ming,LIU Ping,et al.Research on aging precipitation in a Cu-Cr-Zr-Mg alloy[J].Materials Science and Engineering A,2005,392(1-2):422-426.
• [4]Suzuki S,Shibutani N,Mimura K,et al.Improvement in strength and electrical conductivity of CuNiSi alloy by aging and cold rolling[J].Journal of Alloys and Compounds,2006,417:116-120.
• [5]Correia J B,Davies H A,Sellars C M.Strengthening in rapidly solidified age hardened CuCr and CuCrZr alloys[J].Acta Materialia,1997,45(1):177-190.
• [6]BI Li-ming,LIU Ping,CHEN Xiao-hong,et al.Analysis of phase in Cu-15%Cr-0.24%Zr alloy[J].Transactions of Nonferrous Metals Society of China,2013,23(5):1342-1348.
• [7]ZHANG Hui,ZHANG Hong-gang,LI Luo-xing.Hot deformation behavior of Cu-Fe-P alloys during compression at elevated temperatures[J].Journal of Materials Processing Technology,2009,209(6):2892-2896.
• [8]Hanzelka P,Musilova V,Kralik T,et al.Thermal conductivity of a CuCrZr alloy from 5 K to room temperatures[J].Cryogenics,2010,50(11-12):737-742.
• [9]Jayakumar P K,Balasubramanian K,Rabindranath Tagore G.Recrystallisation and bonding behaviour of ultra fine grained copper and Cu-Cr-Zr alloy using ECAP[J].Materials Science and Engineer A,2012,538(15):7-13.
• [10]Zhang L,Li Z,Lei Q,et al.Hot deformation behavior of Cu-8.0Ni-1.8Si-0.15Mg alloy[J].Materials Science and Engineer A,2011,528(3):1641-1647.
• [11]DENG Ying,YIN Zhi-min,HUANG Ji-wu.Hot deformation behavior and microstructural evolution of homogenized 7050aluminum alloy during compression at elevated temperature[J].Materials Science and Engineering A,2011,528:1780-1786
• [12]Momeni A,Dehghani K.Characterization of hot deformation behavior of 410 martensitic stainless steel using constitutive equations and processing maps[J].Materials Science and Engineering A,2010,527:5467-5473
• [13]Srinivasan N,Prasad Y V R K,RAO P R.Hot deformation behavior of Mg-3Al alloy study using processing map[J].Materials Science and Engineering A,2008,476(2):146-156.
• [14]Prasad Y V R K,Rao K P.Processing maps for hot deformation of rolled AZ31 magnesium alloy plate:Anisotropy of hot workability[J].Materials Science and Engineer A,2012,487(1-2):316-327.
• [15]Gronostajski Z.The deformation processing map for control of microstructure in CuAl9.2Fe3 aluminium bronze[J].Journal of Materials Processing Technology,2002,125-126(9):119-124.

文章评论(Comment)：