樊新民,高洁,宋锦柱,周旸

• 1:南京理工大学材料科学与工程学院

摘要(Abstract)：

为研究中碳钢中铬、镍合金元素对渗硼层组织和渗硼动力学的影响,对40钢、40Cr和40CrNi钢在880、910和940℃分别进行3、5、7、9 h的粉末渗硼,用光学显微镜、扫描电镜观察了渗层的组织形貌,对渗层进行了EDS和XRD分析。结果表明,渗硼层组织为锯齿状,Cr和Ni合金元素对渗层锯齿状结构的尖锐度略有影响。铬、镍合金元素均匀分布于硼化物层中,渗层物相组成中除了大量的Fe2B相外,还有少量的FeB相及Cr2B、Ni2B和Fe。动力学研究表明,40钢、40Cr和40CrNi的渗层厚度与渗硼时间均呈抛物线关系,渗硼扩散激活能分别为147、243和256 kJ/mol。

关键词(KeyWords)： 渗硼;合金元素;生长动力学;显微组织

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 樊新民,高洁,宋锦柱,周旸

DOI: 10.13289/j.issn.1009-6264.2014.11.035

参考文献(References)：

• [1]马图施卡A G V.渗硼[M].荀毓闽,译.北京:机械工程出版社,1987:1-2.
• [2]张云江,吴玺,王艳丽.渗硼在筛类产品热处理中的应用[J].金属热处理,2011,36(8):101-103.ZHANG Yun-jiang,WU Xi,WANG Yan-li.Application of boronizing in heat treatment of sieve products[J].Heat Treatment of Metals,2011,36(8):101-103.
• [3]邢泽炳,翟鹏飞,张晓刚.45钢耕作部件表面渗硼处理及耐磨性[J].金属热处理,2012,37(9):113-116.XING Ze-bing,ZHAI Peng-fei,ZHANG Xiao-gang.Surface boronizing and wear resistance of 45 steel tillage parts[J].Heat Treatment of Metals,2012,37(9):113-116.
• [4]瓦洛石宁ЛГ.钢与铸铁的渗硼[M].于堒,译.北京:国防工业出版社,1981:24.
• [5]Yu L G,Chen X J,Khor K A,et al.FeB/Fe2B phase transformation during SPS pack-boriding:boride layer growth kinetics[J].Acta Materialia 2005,53:2361-2368.
• [6]Ozbek I,Bindal C.Kinetics of borided AISI M2 high speed steel[J].Vacuum,2011,86:391-397.
• [7]Campos-silva I,Ortiz-dominguez M,Tapia-quintero C,et al.Kinetics and boron diffusion in the FeB/Fe2B layers formed at the surface of borided highalloy steel[J].Journal of Materials Engineering and Performance,2012,21:1714-1723.
• [8]Genel K.Boriding kinetic of H13 steel[J].Vacuum,2006,80:451-457.
• [9]Kayali Y,Gunes I,Ulu S.Diffusion kinetics of borided 52100 and AISI 440C steels[J].Vacuum,2012,86:1428-1434.
• [10]Ipek M,Efe G C,Ozbek I,et al.Investigation of boronizing kinetics of AISI 51100 steel[J].Journal of Materials Engineering and Performance,2012,21:733-738.
• [11]Uslu I,Comert H,Iper M,et al.Evaluation of borides formed on AISI P20 steel[J].Materials and Design,2007,28:55-61.
• [12]Campos-Silva I,Ortiz-dominguez M,Lopez-perrusquia N,et al.Characterization of AISI 4140 borided steels[J].Applied Surface Science,2010,256(8):2372-2379.
• [13]郝少祥,孙玉福,杨凯军.Cr12MoV钢渗硼工艺及渗层的组织与性能[J].金属热处理,2006,31(7):68-72.HAO Shao-xiang,SUN Yu-fu,YANG Kai-jun.Microstructure and properties of boronizing layer and boronizing process of Cr12MoV steel[J].Heat Treatment of Metals,2006,31(7):68-72.
• [14]戚正风.固态金属中的扩散与相变[M].北京:机械工业出版社,1998:114.

文章评论(Comment)：