李培友,孟凡莹,王永善

• 1:陕西理工大学材料科学与工程学院

摘要(Abstract)：

采用"二元共晶混合"法设计富Cu基Cu-Ti-Ni-Zr合金成分,通过水冷铜模铸造法制备出不同直径Cu-Ti-Ni-Zr合金棒材。利用X射线衍射仪(XRD)、差示扫描量热仪(DSC)、万能试验机和扫描电镜(SEM)研究合金的玻璃形成能力和力学性能。结果表明,Cu_(49.64)Ti_(35.08)Ni_(7.69)Zr_(7.6)合金具有较高玻璃形成能力,其临界直径可达4 mm;而表征玻璃形成能力的热力学参数过冷液相区ΔTx和参数γ值最小,分别为26 K和0.385;另外,约化玻璃转变温度Trg值却与临界直径小于3 mm的Cu_(51.1)Ti_(34.1)Ni_(7.2)Zr_(7.6)合金的Trg值相等。通过对合金力学性能进行研究,结果表明,Cu_(49.64)Ti_(35.08)Ni_(7.69)Zr_(7.6)和Cu_(51.1)Ti_(34.1)Ni_(7.2)Zr_(7.6)非晶合金分别具有0.75%和0.28%的塑性,而Cu_(48.18)Ti_(36.06)Ni_(8.16)Zr_(7.6)非晶合金断裂机制近似为脆性断裂。通过锯齿流变应力降分析,发现剪切带稳定扩展应力降大于剪切带萌生或缓慢扩展时应力降,且塑性较好的剪切带萌生应力降约大于近似脆性材料剪切带萌生应力降,而剪切带萌生应力降小于5 MPa。

关键词(KeyWords)： 大块金属玻璃;玻璃形成能力;力学性能;锯齿流变;应力降

Abstract:

Keywords:

基金项目(Foundation): 陕西理工大学博士科研启动项目(SLGKYQD2-22,SLGQD13-21);; 陕西省教育厅专项资金(16JK1152)

作者(Author): 李培友,孟凡莹,王永善

DOI: 10.13289/j.issn.1009-6264.2016.10.008

参考文献(References)：

• [1]王美玲,杨斌.W纤维/Zr Ti Cu Ni Be Nb基金属玻璃复合材料的断裂机制[J].材料热处理学报,2012,33(10):7-11.WANG Mei-ling,YANG Bin.Fracture mechanism of tungsten fiber reinforced Zr Ti Cu Ni Be Nb metallic glass composites[J].Transactions of Materials and Heat Treatment,2012,33(10):7-11.
• [2]毛咏发,林建国,檀朝桂,等.Zr基非晶合金在过冷液相区的拉伸变形行为[J].材料热处理学报,2014,35(1):77-82.MAO Yong-fa,LIN Jian-guo,TAN Chao-gui,et al.Deformation behavior of Zr-based bulk metallic glass in supercooled liquid region[J].Transactions of Materials and Heat Treatment,2014,35(1):77-82.
• [3]宁向梅,黄金亮,殷镖,等.快速凝固Mg80Cu10Y10金属玻璃的晶化行为[J].材料热处理学报,2013,34(4):22-26..NING Xiang-mei,HUANG Jin-liang,YIN Biao,et al.Crystallization behavior of rapidly solidified of Mg80Cu10Y10metallic glass[J].Transactions of Materials and Heat Treatment,2013,34(4):22-26.
• [4]Inoue A.Bulk Amorphous Alloys-Preparation and Fundamental Characteristics[M].Trans Tech Publications Ltd,Switzerland,1998,p.3.
• [5]王嵬,王楠,张万友,等.Co-Fe-Gd合金系非晶形成能力的热力学研究[J].材料热处理学报,2013,34(12):196-200..WANG Wei,WANG Nan,ZHANG Wan-you,et al.Thermodynamic investigation on glass-forming ability of Co-Fe-Gd alloy system[J].Transactions of Materials and Heat Treatment,2013,34(12):196-200.
• [6]Li P Y,Meng F Y,Wang Y S,et al.Glass forming ability and thermodynamic properties in novel La-Al-Cu-Co bulk metallic glasses[J].Journal of Rare Earths,2015,33(9):972-976.
• [7]Li R,Pang S J,Ma C L,et al.Influence of similar atom substituion on glass formation in(La-Ce)-Al-Co bulk metallic glasses[J].Acta Materialia,2007,55:3719-3726.
• [8]Li P Y,Wang G,Ding D,et al.Glass forming ability,thermodynamics and mechanical properties of novel Ti-Cu-Ni-Zr-Hf bulk metallic glasses[J].Materials and Design,2014,53:145-151.
• [9]Li P Y,Wang G,Ding D,et al.Glass forming ability and thermodynamics in the new Ti-Cu-Ni-Zr bulk metallic glasses[J].Journal of Non-Cryst Solids,2012,358:3200-3204.
• [10]Lu Z P,Shen J,Xing D W,et al.Binary eutectic clusters and glass formation in ideal glass-forming liquids[J].Applied Physics Letters,2006,89(7):071910-1-3.
• [11]Yang Y J,Xing D W,Li C P,et al.A new way of designing bulk metallic glasses in Cu-Ti-Zr-Ni system[J].Materials Science and Engineering A,2007,448:15-19.
• [12]Inoue A.High strength bulk amorphous alloys with low critical cooling rates[J].Materials Transactions JIM,1995,36:866-867.
• [13]Turnbull D.Under what conditions can a glass be formed[J].Contempt Physial,1969,10:473-478.
• [14]Lu Z P,Liu C T.A new glass-forming ability of materials:a thermodynamic glasses[J].Acta Materialia,2002,50:3501-3512.
• [15]Sun B A,Pauly S,Tan J,et al.Serrated flow and stick-slip deformation dynamics in the presence of shear-band interactions for a Zr-based metallic glass[J].Acta Materialia,2012,60:4160-4171.

文章评论(Comment)：