一种镍基单晶高温合金长期时效后γ′相的粗化动力学Coarsening kinetics of cubic γ′ precipitates of a nickel-based single crystal superalloy after long-term aging
崔仁杰,黄朝晖,管凯,秦健朝,张毅鹏,赵子晗
摘要(Abstract):
研究了第二代镍基单晶高温合金DD5在870~980℃时效150~2000 h后γ′相的粗化动力学。结果表明:长期时效后DD5合金γ′相的形貌和尺寸取决于时效温度和时效时间,可用形貌稳定因子来表征;在870~980℃时效温度下,枝晶中γ′析出相发生粗化,γ′析出相的平均尺寸随时效时间和温度的增加而增大;动力学计算结果表明DD5合金在长期时效后,γ′相的粗化长大受合金元素扩散的控制,γ′析出相依然保持规则立方状,具有较好的组织稳定性。
关键词(KeyWords): DD5单晶高温合金;γ′相;动力学;长期时效
基金项目(Foundation):
作者(Author): 崔仁杰,黄朝晖,管凯,秦健朝,张毅鹏,赵子晗
DOI: 10.13289/j.issn.1009-6264.2020-0006
参考文献(References):
- [1] Gel M,Duhl D N,Giamei A F.The development of single crystal superalloy turbine blades[C]//Superalloys 1980,Metals Park:ASM,1980:205-214.
- [2] Cetel A D,Duhl D N.Second-generation nickel-base single crystal superalloy[C]//Superalloys 1988,Warrendale:TMS,1988:235-244.
- [3] Ross E W,O′hara K S.“Rene′N4:a first generation single crystal turbine airfoil alloy with improved oxidation resistance low angle boundary strength[C]//Superalloys 1996,Warrendale:TMS,1996:19-25.
- [4] Walston W S,O′hara K,Ross E W,et al.RenéN6:third generation single crystal superalloy[C]//Superalloys 1996,Warrendale:TMS,1996:27-34.
- [5] Tin S,Pollock T M,Murphy W.Stabilization of thermosolutal convective instabilities in Ni-based single-crystal superalloys:carbon additions and freckle formation[J].Metallurgical and Materials Transactions A,2001,32:1743-1753.
- [6] Harris K,Erickson G L.Single crystal alloy technology:U.S.Patent 4643782[P].1987-02-17.
- [7] Duhl D N,Cetel A D.Advanced high strength single crystal superalloy compositions:U.S.Patent 4719080[P].1988-01-12.
- [8] Baldan A.Progress in Ostwald ripening theories and their applications to nickel-base superalloys part I:Ostwald ripening theories[J].Journal of Materials Science,2002,37:2171-2202.
- [9] Baldan A.Progress in Ostwald ripening theories and their applications to the γ′-precipitates in nickel-base superalloys part ii:nickel-base superalloys[J].Journal of Materials Science,2002,37:2379-2405.
- [10] Ardell A J,Ozolins V.Trans-interface diffusion-controlled coarsening[J].Nature Materrials,2005,4(4):309-316.
- [11] Tiley J,Viswanathan G B,Srinivasan R,et al.Coarsening kinetics of γ′ precipitates in the commercial nickel base superalloy Rene' 88 DT[J].Acta Materialia,2009,57:2538-2549.
- [12] Kim I S,Choi B G,Hong H U,et al.Influence of thermal exposure on the microstructural evolution and mechanical properties of a wrought Ni-base superalloy[J].Materials Science and Engineering A,2014,593:55-63.
- [13] Ardell A J.Trans-interface-diffusion-controlled coarsening in ternary alloys[J].Acta Materialia,2013,61:7749-7754.
- [14] Ardell A J.Trans-interface-diffusion-controlled coarsening of γ′precipitates in ternary Ni-Al-Cr alloys[J].Acta Materialia,2013,61:7828-7840.
- [15] Cui R J,Huang Z H.Microstructual evolution and stability of second generation single crystal nickel-based superalloy DD5[J].Transaction of Nonferrous Metals Society of China,2016,26(8):2079-2085.
- [16] 崔仁杰,黄朝晖,张毅鹏,等.980 ℃长期时效对第二代镍基单晶高温合金DD5组织与性能的影响[J].材料热处理学报,2016,37(6):38-42.CUI Ren-jie,HUANG Zhao-hui,ZHANG Yi-peng,et al.The effect of 980 ℃ long-term aging on the microstructure and properties of DD5 second generation single crystal Ni-base superalloys[J].Transactions of Materials and Heat Treatment,2016,37(6):38-42.
- [17] 秦健朝,崔仁杰,黄朝晖,等.小角度晶界对DD5镍基单晶高温合金力学性能的影响[J].航空材料学报,2017,37(3):24-29.QIN Jian-chao,CUI Ren-jie,HUANG Zhao-hui,et al.Effect of low angle grain boundaries on mechanical properties of DD5 single crystal Ni-base superalloy[J].Journal of Aeronautical Materials,2017,37(3):24-29.
- [18] Ges A M,Fornaro O,Palacio H A.Coarsening behaviour of a Ni-base superalloy under different heat treatment conditions[J].Materials Science and Engineering A,2007,458:96-100.
- [19] Hou J S,Guo J T.Influence of thermal exposure on the microstructures and mechanical properties of a superalloy[J].Journal of Materials Engineering and Performance,2006,15(1):67-75.
- [20] Kim H T,Chun S S,Yao X X.Gamma prime (γ′) precipitating and ageing behaviours in two newly developed nickel-base superalloys[J].Journal of Materials Science,1997,32:4917-4923.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||