王明光,张铁军,杨方洲,涂铭旌

• 1:重庆文理学院材料交叉学科研究中心

摘要(Abstract)：

采用有限元分析对20CrMnMo钢淬火热应力场和温度场数值模拟研究。考虑了材料性能随温度变化的特性。基于温度场求解时对材料热物性参数取值、初始条件、边界条件、潜热等处理,对试样进行了温度场和应力场计算分析。结果表明,在淬火冷却过程中,表面温降速率较快,表面与心部存在较大的温差;温度的变化使表面承受压应力而心部承受拉应力,组织转变最终使表面承受拉应力而心部承受压应力。

关键词(KeyWords)： 20CrMnMo钢;淬火;有限元;数值模拟

Abstract:

Keywords:

基金项目(Foundation): 重庆市教委资助项目(KJ111221);; 重庆文理学院人才引进资助项目(R2012RCJ19)

作者(Author): 王明光,张铁军,杨方洲,涂铭旌

参考文献(References)：

• [1]Arimoto K,Yamanaka S,Michiharu N,et al.Explanation of the origin of quench distortion and residual stress in specimens using computer simulation[J].Microstructure and Materials Properties,2009,4(2):168-186.
• [2]李亚欣,刘雅政,周乐育,等.石油套管淬火冷却中三维耦合场的有限元模拟[J].材料热处理学报,2011,32(1):150-154.LI Ya-xin,LIU Ya-zheng,ZHOU Le-yu,et al.FEM simulation of 3-dimensional coupled field for oil casing in quenching process[J].Transactions of Materials and Heat Treatment,2011,32(1):150-154.
• [3]姚连登,赵四新,赵小婷,等.直接淬火研制800MPa级低焊接裂纹敏感性高强钢厚板[J].材料热处理学报,2009,30(3):132-136.YAO Lian-deng,ZHAO Si-xin,ZHAO Xiao-ting,et al.800MPa grade heavy plates with low susceptibility to welding crack produced by direct quenching[J].Transactions of Materials and Heat Treatment,2009,30(3):132-136.
• [4]LI Hui-ping,ZHAO Guo-qun,HE Lian-fang.Solution of non-linear thermal transient problems by a new adaptive time-step method in quenching process[J].Applied Mathematical Modeling,2009,33(1):329-342.
• [5]Clayton P.Tribological aspects of wheel-rail contact a review of recent experimental research[J].Wear,1996,191:170-183.
• [6]徐祖耀.淬火-碳分配-回火(Q-P-T)工艺浅介[J].金属热处理,2009,34(6):1-8.XU Zu-yao.A brief introduction to quenching-partitioning-tempering(Q-P-T)process[J].Heat Treatment of Metal,2009,34(6):1-8.
• [7]贺连芳,李辉平,赵国群,等,淬火过程中温度、组织及应力/应变的有限元模拟,材料热处理学报,2011,32(1):128-133.HE Lian-fang,LI Hui-ping,ZHAO Guo-qun,et al.FEM simulation of temperature,phase-transformation and stress/strain in quenching process[J].Transactions of Materials and Heat Treatment,2011,32(1):128-133.
• [8]Soon Tae Ahn,Dae Sung Kim,Won Jong Nam.Microstructural evolution and mechanical properties of low alloy steel tempered by induction heatin[J].Materials Processing Technology,2005,160:54-58.
• [9]康永林,陈庆军,王克鲁,等.700 MPa级低碳贝氏体钢的热处理工艺研究[J],材料热处理学报,2005,26(3):96.KANG Yong-lin,CHEN Qing-jun,WANG Ke-lu,et al.Study on heat treatment process of the 700MPa grade low carbon bainitic steel[J],Transactions of Materials and Heat Treatment,2005,26(3):96.
• [10]杨跃辉,蔡庆伍,武会宾,等.两相区热处理工艺对9Ni钢性能的影响[J].材料热处理学报,2009,30(3):92-95.YANG Yue-hui,CAI Qing-wu,WU Hui-bin,et al.Effect of quenching,lamellarizing and tempering process on properties of 9Ni steel[J].Transactions of Materials and Heat Treatment,2009,30(3):92-95.
• [11]王春芳,王毛球,时捷,等.17CrNiMo6钢中板条马氏体的形态与晶体学分析[J].材料热处理学报,2007,28(2):64-68.WANG Chun-fang,WANG Mao-qiu,SHI Jie,et al.The morphology and crystallographic analysis of lath martensite in 17CrNiMo6 steel[J].Transactions of Materials and Heat Treatment,2007,28(2):64-68.
• [12]Rios P R.Relationship between non-isothermal transformation curves and isothermal isothermal and non-isothermal kinetics[J].Acta Materialia,2005,53:4893-4901.
• [13]陈银莉,余伟,苏岚,等.SPV490钢板直接淬火回火工艺的研究[J].北京科技大学学报,2007,29(12):85-88.CHEN Yin-li,YU Wei,SU Lan,et al.Study of direct quenching process for SPV490 steel plate[J].Journal of University of Science and Technology Beijing,2007,29(12):85-88.
• [14]袁俭,张伟民,刘占仓,等.不同冷却方式下换热系数的测量与计算[J].材料热处理学报,2005,26(4):115-119.YUAN Jian,ZhANG Wei-min,LIU Zhan-cang,et al.The measurement and calculation of heat transfer coefficient under different cooling conditions[J].Transactions of Materids and Heat Treatment,2005,26(4):115-119.
• [15]Kim C K,Park J I,Lee S,et al Effects of alloying elements on microstructure,hardness,and fracture toughness of centrifugally cast high-speed steel rolls[J].Metallurgical and Materials Transactions A,2005,36(1):87-97.

文章评论(Comment)：