胡平,贺斌,盈亮

• 1:大连理工大学汽车工程学院
• 2:大连理工大学工业装备结构分析国家重点实验室

摘要(Abstract)：

为了获得热冲压板料和模具的界面换热系数,本文通过设计圆台实验分别获得热冲压淬火过程中5、10、20、30和40 MPa保压压强时的板料中心降温曲线和模具模面中心向下1.5 mm处的升温曲线。在考虑模具热电偶温度响应时间和板料由奥氏体向马氏体转变的相变潜热影响基础上,提出运用有限元反算求解界面换热系数的方法,进而获得界面换热系数与保压压强的对应关系。结果表明,界面换热系数值与压强近似呈直线关系,使用该方法时板料与模具的模拟温度曲线和实验温度曲线的相对误差可控制在15%以内,且二者的平均绝对误差最大不超过24℃。

关键词(KeyWords)： 热冲压;界面换热系数;有限元反算

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(11272075);; 中国博士后科学基金(2014M561223);; 中央高校基本科研业务费专项资金(DUT14ZD224;DUT14RC(3)032)

作者(Author): 胡平,贺斌,盈亮

DOI: 10.13289/j.issn.1009-6264.2016.03.033

参考文献(References)：

• [1]Karbasian H,Tekkaya A E.A review on hot stamping[J].Journal of Materials Processing Technology,2010,210(15):2103-2118.
• [2]筱飞.热成形技术助汽车轻量化[J].汽车与配件,2014(2):44-46.XIAO Fei.Hot forming technology for automobile lightweight[J].Automobile&Parts,2014(2):44-46.
• [3]王平,崔礼春,马国礼,等.热成形技术及其在车身上的应用:面向未来的汽车与交通[C]//2013中国汽车工程学会年会,北京:2013,3.WANG Ping,CUI Li-chun,MA Guo-li,et al.Hot forming technology and its application in vehicle body:For the future of automobile and traffic[C]//2013 SAE-China Congress,Beijing,2013.
• [4]He B,Ying L,Hu P,et al.Investigation of mechanical property and springback behavior with hot stamping RCP process[J].Advanced Materials Research,2014,1063:186-189.
• [5]廖铮玮,盈亮,胡平,等.高强度钢板热成形界面换热系数估算[J].材料热处理学报,2013(S1):167-172.LIAO Zheng-wei,YING Liang,HU Ping,et al.Estimation of interface heat transfer coefficient of ultra high strength steels in hot forming[J].Transactions of Materials and Heat Treatment,2013(S1):167-172.
• [6]张志强,李宪爽,赵勇,等.高强度硼钢空冷热交换系数实验与模拟研究[J].热加工工艺,2015(2):44-46.ZHANG Zhi-qiang,LI Xian-shuang,ZHAO Yong,et al.Experiment and simulation study on heat transfer coefficient of high-strength boron steel cooling in air[J].Hot Working Technology,2015(2):44-46.
• [7]Caron E,Daun K J,Wells M A.Experimental characterization of heat transfer coefficients during hot forming die quenching of boron steel[J].Metallurgical and Materials Transactions B,2013,44(2):332-343.
• [8]Cetinkale T N,Fishenden M.Thermal conductance of metal surfaces in contact:Proceedings of International Conference of Heat Transfer[C]//London,UK:Institute of Mechanical Engineers,1951:271-275.
• [9]Cooper M G,Mikic B B,Yovanovich M M.Thermal contact conductance[J].International Journal of Heat and Mass Transfer,1969,12(3):279-300.
• [10]Merklein M,Lechler J,Stoehr T.Investigations on the thermal behavior of ultra high strength boron manganese steels within hot stamping[J].International Journal of Material Forming,2009,2(S1):259-262.
• [11]Caron E,Daun K J,Wells M A.Experimental heat transfer coefficient measurements during hot forming die quenching of boron steel at high temperatures[J].International Journal of Heat and Mass Transfer,2014,71:396-404.
• [12]Zhao K,Wang B,Chang Y,et al.Comparison of the methods for calculating the interfacial heat transfer coefficient in hot stamping[J].Applied Thermal Engineering,2015,79:17-26.
• [13]廖铮玮.高强度钢板热成形换热系数估算及实验研究[D].大连:大连理工大学,2013.LIAO Zheng-wei.Estimation and experimental study of heat transfer coefficient in hot forming of ultra high strength steels[D].Dalian:Dalian University of Technology,2013.
• [14]Bosetti P,Bruschi S,Stoehr T,et al.Interlaboratory comparison for heat transfer coefficient identification in hot stamping of high strength steels[J].International Journal of Material Forming,2010,3(S1):817-820.
• [15]Naderi M.Hot stamping of ultra high strength steels[D].RWTH Aachen,Aachen,Germany,2007.
• [16]Woodbury K A.Effect of thermocouple sensor dynamics on surface heat flux predictions obtained via inverse heat transfer analysis[J].International Journal of Heat and Mass Transfer,1990,33(12):2641-2649.
• [17]Abdulhay B,Bourouga B,Dessain C.Thermal contact resistance estimation at the blank/tool interface:experimental approach to simulate the blank cooling during the hot stamping process[J].International Journal of Material Forming,2010,3(3):147-163.
• [18]Geiger M,Merklein M,Lechler J.Determination of tribological conditions within hot stamping[J].Production Engineering,2008,2(3):269-276.
• [19]Tondini F,Bosetti P,Bruschi S.An experimental-numerical procedure to identify heat transfer coefficient in hot stamping processes[C]//7th EUROMECH Solid Mechanics Conference,Lisboa,Portugal,2009:1-7.
• [20]Hu P,Ying L,Li Y,et al.Effect of oxide scale on temperature-dependent interfacial heat transfer in hot stamping process[J].Journal of Materials Processing Technology,2013,213(9):1475-1483.

文章评论(Comment)：