MoNb合金热变形行为及本构关系Hot deformation behavior and constitutive relation of MoNb alloy
钟明君,王克鲁,李鑫,周璇,冯瑞,程静
摘要(Abstract):
采用Gleeble-3800型热模拟试验机对MoNb合金进行等温恒应变速率压缩试验,研究该合金在变形温度900~1200℃和应变速率0.01~10 s~(-1)条件下的热变形行为,计算其热变形激活能。结果表明:变形温度和应变速率对流动应力具有显著影响,流动应力随变形温度的升高和应变速率的降低而减小。误差分析表明,采用多元线性回归法建立的MoNb合金本构关系模型具有较高的精度,该模型的预测值误差小于10%的数据点占总数的92.86%,相关系数和平均相对误差分别为0.976和4.08%,能较为准确的预测合金的高温流动应力。
关键词(KeyWords): MoNb合金;热变形行为;变形激活能;本构模型
基金项目(Foundation): 国家自然科学基金(51464035);; 南昌航空大学研究生创新专项资金(YC2019017)
作者(Author): 钟明君,王克鲁,李鑫,周璇,冯瑞,程静
DOI: 10.13289/j.issn.1009-6264.2019-0336
参考文献(References):
- [1] 王东辉,袁晓波,李中奎,等.钼及钼合金研究与应用进展[J].稀有金属快报,2006,25(12):1-7.WANG Dong-hui,YUAN Xiao-bo,LI Zhong-kui,et al.Progress of research and applications for Mo metal and its alloys[J].Rare Metals Letters,2006,25(12):1-7.
- [2] Cockeram B V.The role of stress state on the fracture toughness and toughening mechanisms of wrought molybdenum and molybdenum alloys[J].Materials Science and Engineering A,2010,528(1):288-308.
- [3] Hu P,Hu B L,Wang K S,et al.Arc erosion behavior of La-doping titanium-zirconium-molybdenum alloy[J].Journal of Alloys and Compounds,2016,685:465-470.
- [4] 史辰露.Mo-Nb系合金熔覆层的制备及其特性研究[D].保定:华北电力大学,2015.SHI Chen-lu.A study on preparation and properties of the laser cladding Mo-Nb alloys[D].Baoding:North China Electric Power University:2015.
- [5] 张华锋,郑剑平,杨启法,等.铌含量对Mo-Nb合金单晶高温抗内压蠕变性能的影响[J].稀有金属材料与工程,2013,42(4):751-755.ZHANG Hua-feng,ZHENG Jian-ping,YANG Qi-fa,et al.Influence of niobinum content on high temperature inner pressure creep resistance of Mo-Nb alloy single crystal[J].Rare Metal Materials and Engineering,2013,42(4):751-755.
- [6] 张文,张平祥,李来平,等.Mo-Nb单晶的热变形行为及本构方程[J].稀有金属材料与工程,2018,47(1):207-213.ZHANG Wen,ZHANG Ping-xiang,LI Lai-ping,et al.Hot deformation behavior and constitutive equation of Mo-Nb single crystals[J].Rare Metal Materials and Engineering,2018,47(1):207-213.
- [7] 谢兴华,姚泽坤,宁永权,等.FGH4096粉末高温合金的热变形行为[J].稀有金属材料与工程,2012,41(1):82-86.XIE Xing-hua,YAO Ze-kun,NING Yong-quan,et al.Investigation on hot deformation behavior of P/M superalloy FGH4096[J].Rare Metal Materials and Engineering,2012,41(1):82-86.
- [8] 尹雪雁,于建民,张治民,等.Mg-13Gd-4Y-2Zn-0.5Zr合金的高温热压缩变形[J].特种铸造及有色合金,2016,36(10):1117-1120.YIN Xue-yan,YU Jian-min,ZHANG Zhi-min,et al.Hot compression deformation behavior of Mg-13Gd-4Y-2Zn-0.5Zr magnesium alloy[J].Special Casting and Nonferrous Alloy,2016,36(10):1117-1120.
- [9] 姚彭彭,李萍,李成铭,等.TA15钛合金β热变形行为及显微组织[J].稀有金属,2015,39(11):967-974.YAO Peng-peng,LI Ping,LI Cheng-ming,et al.Hot deformation behavior and microstructure of TA15 titanium alloy in β field[J].Chinese Journal of Rare Metals,2015,39(11):967-974.
- [10] 周峰,王克鲁,鲁世强,等.变形参数对Ti-22Al-24Nb合金高温流动应力及组织影响[J].特种铸造及有色合金,2018,38(12):1361-1365.ZHOU Feng,WANG Ke-lu,LU Shi-qiang,et al.Effects of deformation parameters on high temperature flow stress and microstructure of Ti-22Al-24Nb alloy[J].Special Casting and Nonferrous Alloy,2018,38(12):1361-1365.
- [11] 向嵩,鞠泉,刘国权.15Cr-25Ni-Fe基高温合金的动态再结晶行为及机制[J].江苏大学学报(自然科学版),2010,31(6):665-669.XIANG Song,JU Quan,LIU Guo-quan.Dynamic recrystallization mechanism of 15Cr-25Ni-Fe base superalloy[J].Journal of Jiangsu University (Natural Science Edition),2010,31(6):665-669.
- [12] 周峰,王克鲁,鲁世强,等.含稀土的Ti2AlNb基合金高温流动行为及物理本构模型[J].材料热处理学报,2018,39(12):109-115.ZHOU Feng,WANG Ke-lu,LU Shi-qiang,et al.High temperature flow behavior and physical constitutive model of Ti2AlNb based alloy containing rare earth[J].Transactions of Materials and Heat Treatment,2018,39(12):109-115.
- [13] 王立民,张红,刘宁,等.高合金马氏体耐热钢的热变形表观激活能[J].材料热处理学报,2012,33(2):44-49.WANG Li-min,ZHANG Hong,LIU Ning,et al.Apparent activation energy for hot working of high-alloy martensitic heat-resistant steels[J].Transactions of Materials and Heat Treatment,2012,33(2):44-49.
- [14] Rao K P,Hawbolt E B.Development of constitutive relationships using compression testing of a medium carbon steel[J].Journal of Engineering Materials and Technology,1992,114(1):116-123.
- [15] Kreuss G.Deformation Processing and Structure[M].Ohio:American Society for Metal,1984.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||