田宗军,王东生,沈理达,刘志东,黄因慧

• 1:南京航空航天大学江苏省精密与微细制造技术重点实验室
• 2:南京航空航天大学机电学院

摘要(Abstract)：

采用等离子喷涂和激光重熔复合工艺在TiA l合金表面制备了纳米A l2O3-13wt%TiO2复合陶瓷涂层。为了使重熔后的陶瓷涂层保留一定的纳米结构组织,采用相对较低的激光功率和能量密度进行重熔。用扫描电镜(SEM)和X射线衍射仪(XRD)分析了涂层形貌、微观结构和相组成。结果表明,等离子喷涂纳米陶瓷涂层由纳米颗粒完全熔化区和部分熔化区两部分组成,具有等离子喷涂态的典型层状结构;由于受到激光功率、能量密度、陶瓷材料热物性参数和涂层厚度等因素的综合影响,重熔后陶瓷涂层出现了明显的分层结构特征;依据组织形态的不同,可将其大致分为:重熔区、烧结区和残余等离子喷涂区。重熔区由致密细小的等轴晶组成,并且保留了部分来源于原等离子喷涂部分熔化区的残留纳米粒子。由于等离子喷涂过程中涂层沉积时的快速凝固作用,涂层以亚稳相-γA l2O3为主,经过激光重熔处理后,-γA l2O3又重新转变为稳定相-αA l2O3。

关键词(KeyWords)： 激光重熔;等离子喷涂;纳米陶瓷涂层;微观组织

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(59975046);; 江苏省自然科学基金重点项目(BK2004005)

作者(Author): 田宗军,王东生,沈理达,刘志东,黄因慧

DOI: 10.13289/j.issn.1009-6264.2010.02.011

参考文献(References)：

• [1]YANG R,CUI Y Y,DONG L M,et al.Alloy development and shell mould casting of gamma TiAl[J].Journal of Material Processing Technology,2003,135(2-3):179-188.
• [2]Lbrahim A,Lima R S,Berndt C C,et al.Fatigue and mechanical properties of nanostructured and conventional titania(TiO2)thermal spraycoatings[J].Surface and Coatings Technology,2007,201(16-17):7589-7596.
• [3]ZHANG J,HE J,DONG Y,et al.Microstructure and properties of Al2O3-13wt%TiO2coatings sprayed using nanostructured powders[J].RareMetals,2007,26(4):391-397.
• [4]WANG Y,TIAN W,YANG Y.Thermal shock behavior of nanostructured and conventional Al2O3/13wt%TiO2coatings fabricated by plasmaspraying[J].Surface and Coatings Technology,2007,201(18):7746-7754.
• [5]陈传忠,雷延权,包全合,等.等离子喷涂-激光重熔陶瓷涂层存在问题及改进措施[J].材料科学与工艺,2002,10(4):431-435.CHEN Chuan-zhong,LEI Ting-quan,BAO Quan-he,et al.Problems and the improving measures in laser remelting of plasma sprayed ceramiccoatings[J].Materials Science and Technology,2002,10(4):431-435.
• [6]Yang Y Z,Zhu Y L,Liu Z Y,et al.Laser remelting of plasma sprayed Al2O3ceramic coatings and subsequent wear resistance[J].MaterialsScience and Engineering A,2000,291(1-2):168-172.
• [7]Ahmed I,Bergman TL.Optimization of plasma spray processing parameters for deposition of nanostructured powders for coating formation[J].Journal of Fluids Engineering,2006,128(2):394-401.
• [8]王全胜,王富耻,柳彦博,等.等离子喷涂纳米Al2O3-13%TiO2涂层组织与性能[J].稀有金属材料与工程,2007,36(S2):530-532.WANG Quan-sheng,WANG Fu-chi,LIUYan-bo,et al.Microstructure and properties of nano-structured Al2O3-13%TiO2coating by APS[J].RareMetal Materials and Engineering,2007,36(S2):530-532.
• [9]宫文彪,孙大千,孙喜兵,等.等离子喷涂纳米团聚体粉末的熔化特性研究[J].材料热处理学报,2007,28(4):125-129.GONG Wen-biao,SUN Da-qian,SUN Xi-bing,et al.Study on melting characteristics of plasma-sprayed nanometer agglomerated powders[J].Transactions of Materials and Heat Treatment,2007,28(4):125-129.
• [10]Gao Y L,Wang C S,Yao M,et al.The resistance to wear and corrosion of laser-cladding Al2O3ceramic coating on Mg alloy[J].Applied SurfaceScience,2007,253(12):5306-5311.
• [11]陈传忠.激光熔覆Al2O3+TiO2复合陶瓷涂层的微观结构[J].硅酸盐学报,2000,28(2):133-138.CHEN Chuan-zhong.Microstructure of laser-cladded Al2O3+TiO2composite ceramic coating[J].Journal of the Chinese Ceramic Society,2000,28(2):133-138.
• [12]花国然,黄因慧,赵剑峰,等.激光熔覆纳米Al2O3等离子喷涂陶瓷涂层[J].中国有色金属学报,2004,14(2):199-203.HUA Guo-ran,HUANG Yin-hui,ZHAO Jian-feng,et al.Plasma sprayed ceramic coating by laser cladding of Al2O3nano-particles[J].The ChineseJournal of Nonferrous Metal,2004,14(2):199-203.
• [13]李崇桂,田伟,杨勇,等.TC4钛合金表面等离子喷涂Al2O3-13wt%TiO2涂层及激光重熔研究[J].材料热处理学报,2007,28(S):228-232.LI Chong-gui,TIAN Wei,YANG Yong,et al.Microstructure and properties of Al2O3-13wt%TiO2coatings fabricated by plasma spraying and laserremelting on titanium alloy[J].Transactions of Materials and Heat Treatment,2007,28(S):228-232.
• [14]李军,张光钧,李文戈.激光熔覆制备纳米陶瓷涂层的研究进展[J].机械工程材料,2007,31(11):13-16.LI Jun,ZHANG Guang-jun,LI Wen-ge,et al.Research progress of nano-composite coating prepared by laser cladding[J].Materials for MechanicalEngineering,2007,31(11):13-16.
• [15]Lin X H,Zeng Y,Zhou X M,et al.Microstructure of alumina-3wt%titania coatings by plasma spraying with nanostructured powders[J].MaterialsScience and Engineering A,2003,357(1-2):228-234.

文章评论(Comment)：