侯建强,符寒光,雷永平,戴建方

• 1:北京工业大学材料科学与工程学院
• 2:江苏东冶轧辊有限公司

摘要(Abstract)：

设计了一种用廉价的硼元素部分(或全部)取代普通高速钢轧辊中价格昂贵的合金元素的轧辊。借助光学显微镜(OM)、X射线衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)等方法对高硼高速钢轧辊铸态组织进行研究。结果表明:高速钢轧辊铸态组织主要由马氏体基体和少量的残余奥氏体以及M23(B,C)6,M3(B0.7C0.3)和(W,Mo)2(B,C)碳硼化合物组成,基体显微硬度达到820～950 HV,轧辊的铸态硬度大于64 HRC。

关键词(KeyWords)： 高速钢;轧辊;硼化物;组织;硬度

Abstract:

Keywords:

基金项目(Foundation): 科技部中小企业创新基金(10C26213201139);; 云南省院省校科技合作专项(2010AD012)

作者(Author): 侯建强,符寒光,雷永平,戴建方

DOI: 10.13289/j.issn.1009-6264.2011.07.020

参考文献(References)：

• [1]郭耕三.高速钢及其热处理[M].北京:机械工业出版社,1985.
• [2]Hwang K C,Lee S,Lee H C.Effects of alloying elements on microstructure and fracture properties of cast high speed steel rolls[J].Mater Sci Eng A,1998,254:282-295.
• [3]Knight C W,Hardy S J,Lees A W,et al.Investigations into the influence of asymmetric factors and rolling arameters on strip curvature during hotrolling[J].Journal of Materials Processing Technology,2003,134(2):180.
• [4]Fu H G,Qiang X,Xing J D.A study on the crack control of a high-speed steel roll fabricated by a centrifugal casting technique[J].Materials Scienceand Engineering A,2008,474(1-2):82-87.
• [5]刘天佑.低合金高速钢的分类及合金化原理[J].本溪冶金高等专科学校学报,2000,2(4):1-5.LIU Tian-you.On the classification and alloying principle of low-alloy high-speed steel[J].Journal of Benxi College of Metallurgy,2000,2(4):1-5.
• [6]Yoshikazu Sano,Toshiyuki Hattorl,Michio Haga.Characteristics of high-carbon high hpeed hteel rolls for hot strip mill[J].ISIJ International,1992,32(11):1194-1201.
• [7]本溪钢铁公司第一炼钢厂.硼钢[M].北京:冶金工业出版社,1977.
• [8]刘仲礼,李言祥,陈祥,等.硼、碳含量对高硼铁基合金组织和性能的影响[J].钢铁,2007,42(6):78-82.LIU Zhong-li,LI Yan-xiang,CHEN Xiang,et al.Effect of boron and carbon content on microstructure and properties of high boron iron-based alloy[J].Iron and Steel,2007,42(6):78-82.
• [9]龚建勋,李丹,肖逸锋,等.Fe-Cr-B-C堆焊合金的显微组织及耐磨性[J].材料热处理学报,2010,31(3):136-141.GONG Jian-xun,LI Dan,XIAO Yi-feng,et al.Microstructure and wear resistance of Fe-Cr-B-C hardfacing alloys[J].Trans Mater Heat Treat,2010,31(3):136-141.
• [10]Ambroza P,Kavaliauskiene L.Influence of carbon and boron on the properties of deposited layer[J].Mechanika,2004(4):59-63.
• [11]Baker H.ASM Handbook,Volume 3.Alloy Phase Diagrams[M].ASM International,Materials Park,Ohio,1992:281.
• [12]符寒光.高硼低碳铁基合金凝固组织研究[J].材料热处理学报,2006,27(2):63-66.FU Han-guang.Study of solidification structure of Fe2 B2 C cast alloy[J].Trans Mater Heat Treat,2006,27(2):63-66.
• [13]銮义坤,白云龙,宋男男,等.离心铸造轧辊用高速钢的热处理[J].金属学报,2009,45(4):470-475.LUAN Yi-kun,BAI Yun-long,SONG Nan-nan,et al.Heat treatment of high speed steel used for centrifugal cast rolls[J].Acta Metallurgica Sinica,2009,45(4):470-475.

文章评论(Comment)：