程亚平,李志刚,张强

• 1:河北工业大学电气工程学院
• 2:天津电子信息职业技术学院

摘要(Abstract)：

根据钢绞线感应加热的原理,利用有限元分析法对钢绞线感应加热过程中温度场进行分析,钢绞线结构复杂,其有限元建模分析方法的正确性需要验证,为此,使用红外热成像仪进行了钢绞线感应加热温度场测定实验。结果表明,电流密度和频率是影响感应加热效果的主要参数,而与钢绞线位于线圈中的位置无关。

关键词(KeyWords)： 钢绞线;感应加热;温度场;有限元分析法;红外热成像仪

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51377044);; 高等学校博士学科点专项科研基金(20121317110008)

作者(Author): 程亚平,李志刚,张强

DOI: 10.13289/j.issn.1009-6264.2014.s2.050

参考文献(References)：

• [1]郭贤贤.低松弛预应力钢绞线感应加热模型的研究[D].天津:河北工业大学,2011.GUO Xian-xian.Studies on model of induction heating of low-relaxation prestressed steel strand[D].Tianjin:Hebei University of Technology,2011.
• [2]杨晓光.横向磁通感应加热及其优化问题的研究[D].天津:河北工业大学,2004.YANG Xiao-guang.Transverse flux induction heating and its optimization problem[D].Tianjin:Hebei University of Technology,2004.
• [3]Hiroaki K,Daisuke M,Norio T,et al.3-D eddy current analysis of induction heating apparatus considering heat emission,Heat Conduction,and Temperature Dependence of Magnetic Characteristics[J].IEEE Transactions on Magnetics,2009,45(3):1847-1850.
• [4]Alfonzetti S,Dilettoso E,Rizzo S A,et al.Stochastic optimization of magnetic shields in induction heating applications by means of the FEM-DBCI method and the salhe evolutionary algorithm[J].IEEE Transactions on Magnetics,2009,45(3):1752-1755.
• [5]Olaf K,Peter P.Transient numerical investigation of induction heating during sublimation growth of silicon carbide single crystals[J].Journal of Crystal Growth,2003,247(1-2):219-235.
• [6]安俊超,荆洪阳,徐连勇,等.一种用红外热成像仪测定焊接热循环的新方法[J].天津大学学报,2011,44(2),148-151.AN Jun-chao,JING Hong-yang,XU Lian-yong,et al.A new method for measuring of welding thermal cycling with infrared thermal imager[J].Journal of Tianjin University,2011,44(2),148-151.
• [7]Brahim R,Didier T,Mohamed B,et al.3-D numerical modeling of the thermo-inductive technique using shell elements[J].IEEE Transactions on Magnetics,2010,46(7):3037-3040.
• [8]Ramdane B,Trichet D,Belkadi M,et al.Electromagnetic and thermal modeling of composite materials using multilayer shell elements[J].IEEE Transactions on Magnetics,2011,47(5):1134-1137.
• [9]Mei R B,Li C S,Liu X H,et al.Analysis of strip temperature in hot rolling process by finite element method[J].Journal of Iron and Steel Research,2010,17(2):17-21.
• [10]时立文.SPSS 19.0统计分析从入门到精通[M].北京:清华大学出版社,2013.

文章评论(Comment)：