张瑞英,史志铭,李红霞

• 1:内蒙古工业大学材料学院

摘要(Abstract)：

以Al、TiO2、C为原材料,用接触反应法制备了TiC-Al2O3P/Al复合材料,采用XRD和SEM手段测定了材料的相组成、组织形貌及相分布,分析了碳含量对组织的影响。试验结果表明,该复合材料主要由分布于Al基体中的球状或近球状的TiC颗粒、不规则的Al2O3颗粒和少量的TiAl3组成,且随含碳量的增加,TiAl3减少;当C和TiO2比超过1.5后,TiAl3基本消失,但出现TiC2相。

关键词(KeyWords)： 铝基复合材料;接触反应法;显微组织;碳

Abstract:

Keywords:

基金项目(Foundation): 内蒙古自然科学基金重大项目(2009ZD05)

作者(Author): 张瑞英,史志铭,李红霞

参考文献(References)：

• [1]Lee J H,Ko S K,Won C W.Combustion characteristics of TiO2/Al/C system[J].Materials Research Bulletin,2001,36(7-8):1157-1167.
• [2]HU Qiao-dan,LUO Peng,YAN You-wei.Microstructures densification and mechanical properties of TiC-Al2O3-Al composite by field-activated combustionsynthesis[J].Materials Science and Engineering A,2008,486(1-2):215-221.
• [3]Adem Demir,Necat Altinkok.Effect of gas pressure infiltration on microstructure and bending strength of porous Al2O3/SiC-reinforced aluminium matrixcomposites[J].Composites Science and Technology,2004,64:2067-2074.
• [4]Leszek A,Dobrza′nski,Anna Wlodarczyk,et al.The structure and properties of PM composite materials based on EN AW-2124 aluminum alloy reinforcedwith the BN or Al2O3ceramic particles[J].Journal of Materials Processing Technology,2006,175:186-191.
• [5]Nakae Hideo,WU Shu-sen.Engulfment of Al2O3particles during solidification of aluminum matrix composites[J].Materials Science and Engineering A,1998,252:232-238.
• [6]YU Zhi-qiang,WU Gao-hui,SUN Dong-li.Coating of Y2O3additive on Al2O3powder and its effect on the wetting behaviour in the system Al2O3p/Al[J].Materials Letter,2003,57:3111-3116.
• [7]Molina J M,Saravanan R A,Narciso J,et al.Surface modification of 2014 aluminium alloy-Al2O3particles composites by nickel electrochemical deposition[J].Materials Science and Engineering A,2004,383:299-306.
• [8]Leon C A,Drew R A L.Preparation of nickel-coated powders as precursors to reinforce MMCs[J].Journal of Materials Science,2000,35:4763-4768.
• [9]Shao N,Dai J W,Lia G Y,et al.Effect of La on the wettability of Al2O3by molten aluminum[J].Materials Letters,2004,58:2041-2044.
• [10]Baik K H.Interfacial reaction and fracture behavior of cobalt-coated Al2O3reinforced aluminum composites[J].Materials Science and Engineering A,2003,355:79-87.
• [11]KOU Sheng-zhong,XU Guang-ji,DING Yu-tian.Effect of high energy ball milling on synthetic reaction in Al-TiO2-C system[J].Journal of WuhanUniversity of Technology,2005,20(4):50-54.
• [12]Xia T D,Liu T Z,Zhao W J,et al.Self-propagating high-temperature synthesis of Al2O3-TiC-Al composites by aluminothermic reactions[J].Journal ofMaterials Science,2001,36:5581-5584.
• [13]寇生中.XD反应合成Al2O3-TiCP/Al复合材料的热力学及动力学过程研究[D].兰州理工大学,2005.
• [14]Mohanty P S,Gruzleski J E.Mechanism of grain refinement in aluminium[J].Acta Metallurgical et Materialia,1995,43(5):2001-2012.

文章评论(Comment)：