杜诗文,陈双梅

• 1:太原科技大学材料科学与工程学院金属材料成形理论与技术山西省重点实验室

摘要(Abstract)：

利用Gleeble-3500D热模拟试验机,在变形温度为870~1170℃,应变速率为0.05~3 s-1,最大变形量为60%的条件下,对LZ50钢进行等温恒应变速率的热压缩实验,研究应变速率和变形温度对流变应力的影响,建立LZ50钢热变形时的本构方程和热加工图。结果表明:LZ50钢的流变应力随变形温度的升高和应变速率的降低而减小,其动态再结晶型流变应力曲线可表述为加工硬化、过渡、软化和稳态流变4个阶段;热变形激活能为304.265 k J/mol,根据双曲正弦方程建立包含Z参数的峰值流变应力本构方程;将LZ50钢的热加工图与快锻液压机的技术参数及通过Deform模拟获得的优化工艺参数相结合可得,当压下量为15%~20%,在开始锻造的高温阶段1050~1150℃,可采用较高的应变速率0.5~3 s-1,随着锻件温度降低至870~1050℃,应适当降低应变速率至0.5~1.5 s-1以避开失稳区,整个变形过程的微观组织演变机制为动态回复。

关键词(KeyWords)： LZ50钢;热变形激活能;本构方程;热加工图

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51305289,51405325);; 山西省国际科技合作项目(2013081030);; 太原科技大学博士启动基金(20122052)

作者(Author): 杜诗文,陈双梅

DOI: 10.13289/j.issn.1009-6264.2016.03.038

参考文献(References)：

• [1]权国政,石彧,赵磊,等.42Cr Mo钢热塑性变形诱导动态再结晶行为的动力学描述[J].材料热处理学报,2012,33(10):155-162.QUAN Guo-zheng,SHI Yu,ZHAO Lei,et al.Dynamic recrystallization behavior of 42Cr Mo steel induced by thermal deformation[J].Transactions of Materials and Heat Treatment,2012,33(10):155-162.
• [2]蔺永诚,陈明松,钟掘,等.42Cr Mo钢的热压缩流变应力行为[J].中南大学学报(自然科学版),2008(3):549-553.LIN Yong-cheng,CHEN Ming-song,ZHONG Jue,et al.Flow stress behaviors of 42Cr Mo steel during hot compression[J].Journal of Central South University(Science and Technology),2008(3):549-553.
• [3]黄有林,王建波,凌学士,等.热加工图理论的研究进展[J].材料导报,2008,22(z3):173-176.HUANG You-lin,WANG Jian-bo,LING Xue-shi,et al.Research development of hot processing map theory[J].Materials Rewiew,2008,22(z3):173-176.
• [4]Zener C,Hollomon H.Effect of strain rate upon plastic flow of steel[J].Journal of Applied Physics,1944,15(1):22-32.
• [5]陈明松.高性能大锻件控形控性规律与操作机—压机联动轨迹的研究[D].长沙:中南大学,2012.
• [6]覃银江,潘清林,何运斌,等.ZK60镁合金热压缩变形流变应力行为与预测[J].金属学报,2009,45(7):887-891.QIN Yin-jiang,PAN Qing-lin,HE Yun-bin,et al.Hot compression behavior and flow stress prediction of ZK60 magnesiumalloy.Acta Metallurgica Sinica,2009,45(7):887-891.
• [7]Sellars C M,Tegart W J M.Relationship between strength and structure in deformation at elevated temperatures[J].Mem Sci Rev Met,1966(63):731-746.
• [8]Prasad Y V R K.Hot Working Guide:A compendium of Processing Maps[M].OH:ASM International Materials Park,1997.
• [9]陈慧琴,柏金鑫,齐会萍,等.42Cr Mo钢热加工图的建立与热辗扩成形工艺[J].机械工程学报,2014(16):89-96.CHEN Hui-qin,BAI Jin-xin,QI Hui-ping,et al.Establishment of hot processing maps and hot ring rolling process of 42Cr Mo steel[J].Journal of Mechanical Engineering,2014(16):89-96.
• [10]Murty S V S N,Rao B N,Kashyap B P.Development and validation of a processing map for arconiumalloys[J].Modelling and Simulation in Materials Science and Engineering,2002,10;503.
• [11]周军,李中奎,张建军,等.基于Matlab的热加工图的数值构造方法[J].稀有金属,2007,31(S1):49-52.ZHOU Jun,LI Zhong-kui,ZHANG Jian-jun,et al.A numerical computation method for hot processing map based on matlab[J].Chinese Journal of Rare Metals,2007,31(S1):49-52.
• [12]孙瑞环.车轴快锻精确成形工艺参数优化与质量控制研究[D].太原:太原科技大学,2014.
• [13]曾卫东,周义刚,周军,等.加工图理论研究进展[J].稀有金属材料与工程,2006,35(5):673-677.ZENG Wei-dong,ZHOU Yi-gang,ZHOU Jun,et al.Recent development of processing map theory[J].Rare Metal Materials and Engineering,2006,35(5):673-677.
• [14]郭俊锋,周旭东,李汉,等.铸态27Si Mn钢热变形行为及热加工图[J].材料热处理学报,2014,35(12):128-133.GUO Jun-feng,ZHOU Xu-dong,LI Han,et al.Hot deformation behavior and processing maps of as-cast 27Si Mn steel[J].Transactions of Materials and Heat Treatment,2014,35(12):128-133.

文章评论(Comment)：