姚志浩,董建新,张麦仓,洪成淼

• 1:北京科技大学材料科学与工程学院

摘要(Abstract)：

实验研究固溶及稳定化处理工艺对GH738合金碳化物及γ'强化相析出规律的影响。以标准热处理:1020℃×4 h/AC(空冷)+845℃×4 h/AC+760℃×16 h/AC和1080℃×4 h/AC+845℃×24 h/AC+760℃×16 h/AC为基础,调整稳定化阶段保温时间。研究了该合金稳定化过程中碳化物及γ'强化相析出和回溶规律,绘制了γ'强化相长大曲线。结果表明,1020℃固溶后,稳定化时间的延长使晶界析出碳化物增多且呈现半连续分布;而经1080℃固溶后,碳化物析出沿着晶界呈连续状分布;同时,经两种固溶温度处理后,稳定化时间延长,γ'强化相长大符合Oswald熟化规律;经1020℃标准热处理后,合金具有较好强塑性配合,尤其在塑性指标方面有明显优势;而经1080℃标准热处理后,合金持久性能表现更佳。

关键词(KeyWords)： GH738合金;碳化物;γ'强化相;热处理;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51071017)

作者(Author): 姚志浩,董建新,张麦仓,洪成淼

DOI: 10.13289/j.issn.1009-6264.2013.10.010

参考文献(References)：

• [1]Liu X B,Kang B,Chang K M.The effect of hold-time on fatigue crack growth behaviors of Waspaloy alloy at elevated temperature[J].Materials Science and Engineering A,2003,340:8-14.
• [2]姚志浩,董建新,张麦仓,等.GH864合金显微组织与力学性能的关联性[J].稀有金属材料与工程,2010,39(9):1565-1570.YAO Zhi-hao,DONG Jian-xin,ZHANG Mai-cang,et al.Relationship between microstructures and properties for GH864 superalloy[J].Rare Metal Materials and Engineering,2010,39(9):1565-1570.
• [3]姚志浩,董建新,张麦仓.GH864合金组织演变及其对裂纹扩展速率的影响[J].北京科技大学学报,2011,33(12):1501-1507.YAO Zhi-hao,DONG Jian-xin,ZHANG Mai-cang.Effects of microstructure on fatigue crack propagation rate for GH864 alloy[J].Journal of University of Science and Technology Beijing,2011,33(12):1501-1507.
• [4]Tokoro K,Wikstrom N P,Ojo O A,et al.Variation in diffusion-induced solidification rate of liquated Ni-Cr-B insert during TLP bonding of Waspaloy superalloy[J].Materials Science and Engineering,2008,477:311-318.
• [5]Chang K M,Liu X B.Effect ofγ'content on the mechanical behavior of the Waspaloy alloy system[J].Materials Science and Engineering A,2001,308:1-8.
• [6]Mandy L B,Andrew H R.Evaluation of the influence of grain structure on the fatigue variablity of Waspaloy[C]∥Superalloys 2008,In:Reed R C,Green K A,Caron P,et al.Editors,Superalloys 2008,TMS,Warrendale(PA),2008:583-588.
• [7]姚志浩,董建新,张麦仓,等.固溶温度对烟机叶片用GH864合金组织性能的影响[J].材料热处理学报,2011,32(7):44-50.YAO Zhi-hao,DONG Jian-xin,ZHANG Mai-cang,et al.Effect of solution temperature on microstructure and properties of GH864 alloy[J].Transactions of Materials and Heat Treatment,2011,32(7):44-50.
• [8]Kelekanjeri V,Siva K G,Gerhardt R A.Characterization of mirostructure fluctuations in Waspaloy exposed to 760℃for times up to 2500h[J].Electrochimica Acta,2006,51:1873-1880.
• [9]姚志浩,董建新,张麦仓.GH738高温合金热变形过程显微组织控制与预测I.组织演化模型的构建[J].金属学报,2011,47(12):1581-1590.YAO Zhi-hao,DONG Jian-xin,ZHANG Mai-cang.Microstructure control and prediction of GH738 superalloy during hot deformation I.Construction of Microstructure evolution model[J].Acta Metallurgica Sinica,2011,47(12):1581-1590.
• [10]Yao Z H,Zhang M C,Dong J X.Stress rupture fracture model and microstructure evolution for waspaloy[J].Metallurgical and Materials Transactions A,2013,44(7):3084-3098.
• [11]Lvov G,Levit V I,Kaufman M J.Mechanism of primary MC carbide decomposition in Ni-base superalloys[J].Metallurgical and Materials Transactions A,2004,35:1669-1679.
• [12]Hoffelner W,Scalin R B.On the correlation of microstructure,fatigue life and fatigue crack propagation in nickel base superalloys[J].Engineering Materials Advisory Services,1984,3:1647-1658.
• [13]Amiri A,Bruschi S,Sadeghi M H,et al.Investigation on hot deformation behavior of Waspaloy[J].Materials Science and Engineering A,2013,562:77-82.
• [14]王孝平,李周,许文勇,等.不同热处理对喷射成形GH738合金显微组织和力学性能的影响[J].航空材料学报,2011,31(S1):22-26.WANG Xiao-ping,LI Zhou,XU Wen-yong,et al.Different heat treatment on spray formed GH738 alloy microstructure and mechanical properties[J].Journal of Aeronautical Materials,2011,31(S1):22-26.

文章评论(Comment)：