陈翼,张进东,孟亮

• 1:浙江大学材料科学与工程学系
• 2:鑫晖铜业特种线材有限公司

摘要(Abstract)：

用熔铸法制备了Cu-12%Fe合金,研究了经1000℃固溶后不同时效工艺对合金的相组成、显微组织、硬度及电导率的影响。结果表明,550℃时效可细化合金的Fe枝晶,消除Cu基体枝晶偏析并改变晶面间距。合金硬度在时效初期时下降,随后增加并达到最大值后再次下降。在350℃和450℃时效时,电导率随时效时间增加而上升。在550℃和650℃时效时,电导率随时效时间先增加而后下降。对Cu-12%Fe合金固溶并在550℃时效4h,可以获得良好的力学和电学性能匹配。

关键词(KeyWords)： Cu-Fe合金;固溶时效;显微组织;硬度;电导率

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金资助项目(50671092)

作者(Author): 陈翼,张进东,孟亮

参考文献(References)：

• [1]Hong S I.Yield strength of a heavily drawn Cu-20%Nb filamentary microcomposite[J].Scripta Mater,1998,39(12):1685-1691.
• [2]Krotz P D,Spitzig W A,Laabs F C.High temperature properties of heavily deformed Cu-20%Nb and Cu-20%Ta composites[J].Mater Sci Eng A,1989,110:37-47.
• [3]Jin Y,Adachi K,Suzuki H G.Correlation between the cold-working and aging treatments in a Cu-15 Wt Pct Cr in situ composite[J].Metal Mater Trans A,1998,29(8):2195-2203.
• [4]Biselli C,Morris D G.Microstructure and strength of Cu-Fe in Situ composites after very high drawing strains[J].Acta Mater,1996,44(2):493-504.
• [5]Jerman G A,Anderson I E,Verhoeven J D.Strength and electrical conductivity of deformation processed Cu-15Fe alloys produced by powder metallurgytechniques[J].Metal Trans A,1993,24:35-42.
• [6]Zhang L,Meng L.Evolution of microstructure and electrical resistivity of Cu-12wt.%Ag filamentary microcomposite with drawing deformation[J].ScriptaMater,2005,52(12):1187-1191.
• [7]Liu J B,Meng L.The characteristics of Cu-12 wt%Ag filamentary microcomposite in different isothermal process[J].Mater Sci Eng A,2006,418(1-2):320-325.
• [8]Wu Z W,Liu J J,Meng L.Microstructure,mechanical properties and electrical conductivity of Cu-12 wt%Fe microcomposite annealed at differenttemperatures[J].J Alloys Compd,2009,467:213-218.
• [9]姚再起,葛继平.Cu-11.5%Fe合金的导电性[J].中国有色金属学报,2004,14(11):1912-1917.YAO Zai-qi,GE Ji-ping.Conductivity of Cu-11.5%Fe alloys[J].The Chinese Journal of Nonferrous Metals,2004,14(11):1912-1917.
• [10]Benghalem A,Morris D G.Microstructure and strength of wire-drawn Cu-Ag filamentary composites[J].Acta Mater,1997,45(1):397-406.
• [11]Hong S I,Hill M A.Microstructural stability and mechanical response of Cu-Ag microcomposite wires[J].Acta Mater,1998,46(12):4111-4122.
• [12]Anderson K R,Groza J R.Microstructural size effects in high-strength high-conductivity Cu-Cr-Nb alloys[J].Metal Mater Trans A,2001,32(5):1211-1224.
• [13]Morris D G,Morris M A.Microstructure and strength of nanocrystalline copper alloy prepared by mechanical alloying[J].Acta Metall Mate,1991,39(8):1763-1770.
• [14]Hong S I,Hill M A.Microstructure and conductivity of Cu-Nb microcomposites fabricated by the bundling and drawing process[J].Scripta Mater,2001,44(10):2509-2515.

文章评论(Comment)：