Maciej Kupczyk

• 1:Poznan University of Technology
• 2: Institute of Mechanical Engineering
• 3: Poznan
• 4: Poland

摘要(Abstract)：

关键词(KeyWords)：

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): Maciej Kupczyk

参考文献(References)：

• 1.Bunshah R F,Blocher J,Bonifield T,Fish J,Ghate P B,Jacobson B,Mattox D,Me Guire G,Schwartz W,Thornton J and Tucker R.Deposition technologies for films andcoatings-developments and applications,Noyes Publications,Park Ridge,New Jersey,USA.
• 2.Burakowski T and Wierzchon T.Surface engineering of metals-principles,equipment,technologies,CRC PRESS LLC,Catalogue No.8225.
• 3.Hastings W F and Oxley P L B.Predicting tool life from fundamental work material properties and cutting conditions,CIRP Annals,1976,25/1,p.33.
• 4.Hinterman H E.Surface treatments,Proc.of the Conf.ICHM,Moran,Wyoming,USA,August23-28,1981.
• 5.Hinterman H E.Adhesion,friction and wear of thin hard coatings,Wear,1984,100,p.381.
• 6.Kobayashi M and Doi Y.TiN and TiC coatings on cemented carbides,Proc.of the Int.Conf.on Metallurgical Coatings,San Francisco,California,USA1978and Thin Solid Films,1978,54,p.67.
• 7.Kupczyk M.Technological and functional quality of cutting edges with wear resistant coatings,Monograph,1997,232,Series:Rozprawy,No320,Poznan University of Technology Publishers,Poznan.
• 8.Kupczyk M.Influence of coating thickness on tool life and wear.Surface and Coatings Technology,60(1993)446-449.
• 9.Kupczyk M.Exploitation properties of multiphase coatings on cutting tools during hard machinable material machining,Proceedings of EuroMetal Working'94,Udine September28,1994.
• 10.Kupczyk M.Influence of TiNx-Ti layer produced on gear-shaper cutters on technological quality of teeth made of an alloyed constructional steel,PhD Thesis,Poznan University of Technology,Poznan1988.
• 11.Kupczyk M.Application of multiphase coatings on cutting tools,Proc.of8th CIMTEC,Florence1994.
• 12.Kupczyk M,Michalski A,Misiak W and Lejwoda A.Investigations of both technological and functional properties of hard boron nitride coatings deposited by the pulse-plasma method(PPD)on a cutting edges.Report KBN No.7T08A Oil17,contract No.962/T08/99/17,Poznan2002.
• 13.Michalski A,Sobczak S and Kupczyk M.BN coatings obtained by the pulse plasma method,Surface Engineering,No6/2000.
• 14.Misiak W.Influence of producing parameters of boron nitride coatings by the pulse-plasma method on cutting edges on their technological and functional quality.Ph.D.Thesis,Poznan2003.
• 15.Miinz W D.Reactive sputtering of nitrides and carbides,Leybold-Heraeus,Special Publication,1985,11-SO7.2.
• 16.Oakes J J.A comparative evaluation of HfN,A12O3,TiC and TiN coatings on cemented carbide tools,Thin Solid Films,1983,107,p.159.
• 17.Rich D J,Perry A J and Woerner P F.Spalling resistance of cemented carbide with physically and chemically vapour-deposited coatings,Proc.of the14th Int.Conf.onMetallurgical Coatings,San Diego,CA.,USA,March23-27,1987and Thin Solid Films,1987,154,p.417.
• 18.Schiller S,Hesing U,Beister G,Steinfelder K and Striimpfel J.Deposition of hard wear-resistant coatings by reactive d.c.plasmatron sputtering,Proc.of the Int.Conf.on Metallurgical Coatings,San Diego,USA April9-13,1984and Thin Solid Films,118(1984)255-270.
• 19.Sokolowski M,Sokolowska A,Michalski A,Romanowski Z,Rusinek A and Wronikowski M.The deposition of thin films of materials with high melting points on substrates at room temperature using the pulse plasma method,Thin Solid Films,30(1981)29.
• 20.Sproul W D.Very high rate reactive sputtering of TiN,ZrN and HfN,Proc.of the Int.Conf.on Metallurgical Coatings,San Diego,USA April18-22,1983and Thin Solid Films,1983,107,p.141.

文章评论(Comment)：