刘宸玮,唐进元

• 1:中南大学机电工程学院
• 2:中南大学高性能复杂制造国家重点实验室

摘要(Abstract)：

国际上先进的热处理仿真软件DANTE是ABAQUS下的一个模块,论文对标DANTE软件,基于多场耦合理论建立起适用于淬火过程模拟的计算模型,并使用ABAQUS二次开发工具,自主编制出了淬火仿真计算模型。以直径30 mm的12Cr2Ni4A钢圆柱体试样为例对其进行淬火应力仿真计算。结果表明:自主编制的计算模型得到的温度场、组织场演变与DANTE软件的模拟结果基本一致,最终组织含量值误差不超过5.6%;二者计算的淬火内应力变化趋势基本相同;自主编制计算模型得到的残留应力与DANTE软件结果的平均误差小于20%,且与试验值较一致。通过对比验证,表明了本文自主编制的计算模型具有较高的准确性。

关键词(KeyWords)： 淬火应力;多场耦合;二次开发;有限元计算

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划(2018YFB2001300)

作者(Author): 刘宸玮,唐进元

DOI: 10.13289/j.issn.1009-6264.2021-0172

参考文献(References)：

• [1] 李辉平，贺连芳.热处理工艺数值模拟技术[M].北京：化学工业出版社，2017:1-2.LI Hui-ping,HE Lian-fang.Numerical Simulation Technology of Heat Treatment Process [M].Beijing:Chemical Industry Press,2017:1-2.
• [2] López-García R D,García-Pastor F A,Maldonado-Reyes A,et al.Analysis of the effect of immersion rate on the distortion and residual stresses in quenched SAE 5160 steel using FEM[J].Journal of Materials Research and Technology,2019,8(6):5557-5571.
• [3] Zhang Z H,Wang W P,Fu H D,et al.Effect of quench cooling rate on residual stress,microstructure and mechanical property of an Fe-6.5Si alloy[J].Materials Science and Engineering A,2011,530:519-524.
• [4] Gür C H.Investigation of the influence of specimen geometry on quench behaviour of steels by X-ray determination of surface residual stresses[J].International Journal of Mechanical Sciences,2002,44(7):1335-1347.
• [5] Hildenwall B,Ericsson T.Prediction of residual stresses in case-hardening steels [C]//Hardenability Concepts with applications to Steel,Warrendale,PA,1978:579-606.
• [6] Yaakoubi M,Kchaou M,Dammak F.Simulation of the thermomechanical and metallurgical behavior of steels by using ABAQUS software[J].Computational Materials Science,2013,68(1):297-306.
• [7] Imir C,Gür C H.A FEM based framework for simulation of thermal treatments:Application to steel quenching[J].Computational Materials Science,2008,44(2):588-600.
• [8] Tong D M,Gu J F,Yang F.Numerical simulation on induction heat treatment process of a shaft part:Involving induction hardening and tempering[J].Journal of Materials Processing Technology,2018,262:277-289.
• [9] 贺连芳，李辉平，赵国群.淬火过程中温度、组织及应力/应变的有限元模拟[J].材料热处理学报，2011,32(1):128-133.HE Lian-fang,LI Hui-ping,ZHAO Guo-qun.FEM simulation of temperature,phase-transformation and stress/strain in quenching process[J].Transactions of Materials and Heat Treatment,2011,32(1):128-133.
• [10] Ferguson B L,Li Z,Freborg A M.Modeling heat treatment of steel parts[J].Computational Materials Science,2005,34(3):274-281.
• [11] Li Z C,Ferguson B L.Computer modeling and validations of steel gear heat treatment processes using commercial software DANTE[J].Journal of Shanghai Jiaotong University,2011,16(2):152-156.
• [12] Leblond J B,Mottet G,Devaux J C.Mathematical models of anisothermal phase transformations in steels,and predicted plastic behaviour,Mat[J].Metal Science Journal,2014,1(10):815-822.
• [13] 陈睿恺.30Cr2Ni4MoV钢低压转子热处理工艺的研究[D].上海：上海交通大学，2012.CHEN Rui-kai.Study on heat treatment for low pressure rotors of 30Cr2Ni4MoV steel[D].Shanghai:Shanghai Jiao Tong University,2012.
• [14] 李辉平.淬火过程有限元模拟关键技术及工艺参数优化的研究[D].济南：山东大学，2005.LI Hui-ping.Researeh on key technologies of finite element simulation and parameter optimization for quenching processes[D].Ji’nan:Shandong University,2005.
• [15] Lee S J,Matlock D K,Tyne C V.Comparison of two finite element simulation codes used to model the carburizing of steel[J].Computational Materials Science,2013,68:47-54.
• [16] Lee S J,Park K S.Prediction of martensite start temperature in alloy steels with different grain sizes[J].Metallurgical and Materials Transactions A,2013,44(8):3423-3427.
• [17] Leblond J B.Mathematical modeling of transformation plasticity in steels II,coupling with strain hardening phenomena[J].International Journal of Plasticity,1989,5(6):573-591.
• [18] Fischer F D,Sun Q P,Tanaka K.Transformation-induced plasticity (TRIP)[J].Applied Mechanics Reviews,1996,49(6):317-364.
• [19] 杰米尔·哈坎·吉尔，潘健生，吉尔，等.钢热加工数值模拟手册[M].北京：机械工业出版社，2016.Jameer Hakan Gill,PAN Jian-sheng,Gill,et al.Handbook of Thermal Process Modeling of Steels[M].Beijing:Machinery Industry Press,2016.
• [20] Petit-Grostabussiat S,Taleb L,Jullien J F.Experimental results on classical plasticity of steels subjected to structural transformations[J].International Journal of Plasticity,2004,20(8/9):1371-1386.
• [21] 陈明祥.弹塑性力学[M].北京：科学出版社，2007.CHEN Ming-xiang.Elastoplastic Mechanics[M].Beijing:Science Press,2007.
• [22] 王伟佳.多种常用钢在不同淬火介质中换热系数的测算[D].大连：大连理工大学，2007.WANG Wei-jia.Calculation on heat transfer coefficient of several typical steels in different quenchants[D].Dalian:Dalian University of Technology,2007.

文章评论(Comment)：