Cu-Ag-Zr合金的时效性能(英文)Aging property of Cu-Ag-Zr alloy
贾淑果,刘平,宋克兴,郑茂盛,田保红,周根树
摘要(Abstract):
采用真空熔炼的方法制备了Cu-Ag-Zr合金,通过显微硬度测试、电导率测试、TEM分析,研究了Cu-Ag-Zr合金经不同冷变形后在不同时效温度和时效时间下的时效性能。结果表明,Cu-Ag-Zr合金经450℃时效4h具有较好的显微硬度和电导率,其显微硬度和电导率分别达到126HV和84.4%IACS;时效前的冷变形能够促进相的析出,改善Cu-Ag-Zr合金的性能;经80%冷变形后在450℃时效0.5h,Cu-Ag-Zr合金的显微硬度和电导率能分别达到134HV和84.6%IACS。
关键词(KeyWords): 铜合金;Cu-Ag-Zr合金;时效;高导电性;高强度
基金项目(Foundation): Supported by the National 863 Plan of China(2002AA331110);; the Science Development of the Education Department of Henan province(2009A430007);; the Science Research Innovation Fund of Henan University of Science and Technology(2010CZ0008);; the College Young Skeleton Teacher items of Henan province(09003047);; the Young Fund(08QN002);; the Special Scientific Research Fund for Introduced Personal(06-04)of Henan University of Science and Technology
作者(Author): 贾淑果,刘平,宋克兴,郑茂盛,田保红,周根树
DOI: 10.13289/j.issn.1009-6264.2010.09.009
参考文献(References):
- [1]Song K,Xing J,Liu P,et al.Optimization of the processing parameters during internal oxidation of Cu-Al alloy powders using an artificial neural network[J].Materials&design,2005,26(4):337-343.
- [2]Jia S G,Liu P,Zheng M S,et al.Electrotribological behavior of Cu-Ag-Zr contact wire against copper-base strip[J].Metals and Materials International,2005,11(1):71-76.
- [3]Fujii T,Ogawa M,Onaka S.Preferential precipitation of Cr particles on dislocations in a Cu-0.32mass%Cr alloy[J].Japan Inst Metals,1998,62(4):301-309.
- [4]Holzwarth U,Stamm H.The precipitation behavior of ITER-grade Cu-Cr-Zr alloy after simulating the thermal cycle of hot isostatic pressing[J].J Nucl Mater,2000,279:31-45.
- [5]Jia Shuguo,Liu Ping,Zheng Maosheng,et al.Study on the aging precipitated of the high-strength and high-conductivity dilute solute Cu-Ag-Cr alloy[J].Transactions of Materials and Heat Treatment,2004,25(2):8-11.
- [6]Fujii T,Ogawa M,Onaka S.Preferential precipitation of Cr particles on dislocations in a Cu-0.32mass%Cr alloy[J].Japan Inst Metals,1998,62(4):301-309.
- [7]Jia S G,Ning X M,Liu P,et al.Age hardening characteristics of Cu-Ag-Zr Alloy[J].Metals and Materials International,2009,15(4):83-86.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||