程晓杰,李振,蔡阿云,乔建军,孙建华,赵爱民

• 1:北京首钢冷轧薄板有限公司
• 2:北京科技大学冶金工程研究院

摘要(Abstract)：

通过观察显微组织、力学性能测试和利用三维取向分析术(ODF),研究了冷轧压下率对显微组织、力学性能、织构的影响。结果表明,随着冷轧压下率的升高,形变储能增加,退火后铁素体晶粒细小均匀,强度有所增加。变形织构{112}<110>变弱,说明提高冷轧压下率可以消除变形织构,有利织构{111}<110>增强,{001}<110>变弱,共同提高rm值。当冷轧压下率为80%时,伸长率和rm达到峰值,同时Δr较小,冲压性能最优。

关键词(KeyWords)： 冷轧压下率;IF钢;组织;织构

Abstract:

Keywords:

基金项目(Foundation): 北京科技计划项目“首钢高品质板材的开发及其产业化”(D07010300700701)

作者(Author): 程晓杰,李振,蔡阿云,乔建军,孙建华,赵爱民

DOI: 10.13289/j.issn.1009-6264.2014.s1.011

参考文献(References)：

• [1]康永林.现代汽车板工艺及成形理论与技术[M].北京:冶金工业出版社,2009.
• [2]郭艳辉,王昭东,李守卫,等.IF钢与ELC钢织构及性能的对比[J].东北大学学报:自然科学版,2007,28(12):1713-1716.GUO Yan-hui,WANG Zhao-dong,LI Shou-wei,et al.Comparison of texture and properties of IF steel with ELC steel[J].Journal of Northeastern University:Natural Science,2007,28(12):1713-1716.
• [3]Ghosh P,Ghosh C,Ray R K,et al.Precipitation behavior and texture formation at different stages of processing in an interstitial free high strength steel[J].Scripta Materialia,2008,59:276-278.
• [4]Jeong W C.Effect of hot-rolling temperature on microstructure and texture of an ultra-low carbon Ti-interstitial-free steel[J].Materials Letters,2008,62:91-94.
• [5]李守华,李俊.汽车用高强度IF钢的研究进展[J].上海金属,2007,29(5):66-70.LI Shou-hua,LI Jun.Process in research of high strength IF steel for automotive applications[J].Shanghai Metals,2007,29(5):66-70.
• [6]Gupta A K,Kumar D R.Formability of galvanized interstitial-free steel sheets[J].Journal of Materials Processing Technology,2006,172(2):225-237.
• [7]Hutchinson B,Artymowicz D.Mechanisms and modelling of microstructure/texture evolution in interstitial free steel sheets[J].ISIJ International,2001,41(6):533-537.
• [8]吕庆功,陈光南,周家琮,等.深冲钢板的主要织构对塑性应变比的影响[J].钢铁研究,2000,116(5):40-43.LQing-gong,CHEN Guang-nan,ZHOU Jia-cong,et al.Influence of main texture components on plastic strain ratio of deep drawing steel sheet[J].Research on Iron and Steel,2000,116(5):40-43.
• [9]Liu Y,Wang C,Jiang Q,et al.Individual grain orientation and heterogeneous deformation in cold-deformed interstitial-free sheet steel[J].Journal of Materials Science and Technology.2007,23(5):689-692.
• [10]孙景宏.微碳深冲钢板组织演变规律和工艺优化的研究[D].北京:北京科技大学,2005.SUN Jing-hong.Research on the microstructure evolution and technology optimum of extra-low carbon steel with deep drawability[D].Beijing:USTB,2005.
• [11]Wang Z,Zhang P,Guo Y,et al.Recrystallization texture characteristic and drawability of a warm rolled and cold rolled interstitial-free steel[J].Journal of Materials Engineering and Performance,2006,15(6):646-650.
• [12]王先进,王作成,唐获.成分及工艺对加磷高强IF钢成形性能的影响[J].钢铁,1993,28(3):34-38.WANG Xian-jin,WANG Zuo-cheng,TANG Di.Effect of chemical composition and process of extra-low-carbon P-added high-strength IF steel on drawability[J].Iron and Steel,1993,28(3):34-38.
• [13]刘战英,李晋霞,李艳娇,等.冷轧压下率分配对IF钢深冲性能的影响[J].河北理工大学学报,2003,25(4):29-37.LIU Zhan-ying,LI Jin-xia,LI Yan-jiao,et al.The effect of the reduction in cold rolling IF steel sheet for drawability[J].Journal of Hebei Institute of Technology,2003,25(4):29-37.

文章评论(Comment)：