李全安,李建弘,谢建昌,李克杰,张兴渊

• 1:河南科技大学材料科学与工程学院
• 2:西安理工大学材料科学与工程学院

摘要(Abstract)：

研究了稀土元素Y(0~2.4wt%)对Mg-6Al合金显微组织和力学性能的影响。结果表明,添加稀土元素Y可以显著提高时效态合金从室温至200℃区间的拉伸屈服强度和抗拉强度。在Mg-6Al合金中加入0.6wt%~2.4wt%的Y后,合金的显微组织均得到细化,Al2Y高熔点点状稀土合金相产生。在本研究的范围内,加入1.2wt%Y的合金从组织到性能各项性能最优。

关键词(KeyWords)： 钇;镁合金;高温力学性能;显微组织

Abstract:

Keywords:

基金项目(Foundation): 河南省杰出人才计划项目(084200510018);; 洛阳市科技攻关项目(0602018A)

作者(Author): 李全安,李建弘,谢建昌,李克杰,张兴渊

参考文献(References)：

• [1]杨明波,潘复生,张静.Mg-Al系耐热镁合金的开发及应用[J].铸造技术,2005,26(4):331-335.Yang M B,Pan F S,Zhang J.Development and application of Mg-Al based elevated temperature magnesium alloys in automobile industry[J].FoundryTechnology,2005,26(4):331-335.
• [2]高强.最新有色金属金相图谱大全[M].北京:冶金工业出版社,2005:975-979.
• [3]陈振华.耐热镁合金[M].北京:化学工业出版社,2007:79-87.
• [4]Shakhshir S,Medraj M.Computational thermodynamic model for the Mg-Al-Y system[J].J Phase Equilibria and Diffusion,2006,27(3):231-224.
• [5]Bramfitt B L.The effect of carbide and nitride additions on the heterogeneous nucleation behavior of liquid iron[J].Met Trans,1970,1(7):1987-1995.
• [6]余锟,黎文献,张世军.Ce对镁及镁合金中晶粒的细化机理[J].稀有金属材料与工程,2005,34(7):1013-1016.Yu K,Li W X,Zhang S J.Mechanism of grain refining by adding Cerium in Mg and Mg alloy[J].Rare Metal Materials and Engineering,2005,34(7):1013-1016.
• [7]Drnschitz A P,Showalter E R,Joseph,et al.Evolution of structural and high-temperature magnesium alloys[J].SAE Technological Paper,2002,32(1):10-18.
• [8]束德林.金属力学性能[M].北京:机械工业出版社,1999:16-18.
• [9]Armstrong R,Cold I,Doutwaite R M,et al.The relation of yield and flow stresses with grain size in polycrystalline iron[J].Philos Mag,1962,77(7):45-51.
• [10]Hiromasa Y,Toshiro K.Thermal stability and hydrogen absorption/desorption properties of Mg17Al12produced by bulk mechanical alloying[J].Journal ofAlloys and Compounds,2007,433(1-2):241-245.

文章评论(Comment)：