邓想涛,王昭东,王国栋

• 1:东北大学轧制技术及连轧自动化国家重点实验室

摘要(Abstract)：

对一种含0.27%C的工程机械用低合金高强度耐磨钢NM500进行轧制及两相区热处理试验,研究了普通高温轧制+空冷、高温控制轧制+空冷、高温控制轧制+层流冷却以及低温控制轧制+层流冷却工艺参数对实验钢两相区热处理后力学性能和三体冲击磨料磨损性能的影响。结果表明,轧制及轧后冷却工艺参数对试验钢两相区热处理后的性能影响较大,低温控制轧制+层流冷却较好的细化了原始铁素体晶粒,在经过适当的两相区热处理后得到保留,有利于提高实验钢的低温冲击韧性和耐磨性能。

关键词(KeyWords)： 耐磨钢;工艺参数;两相区热处理;三体冲击磨料磨损

Abstract:

Keywords:

基金项目(Foundation): 国家重点研究发展计划(973计划)项目(2010CB630801)

作者(Author): 邓想涛,王昭东,王国栋

DOI: 10.13289/j.issn.1009-6264.2012.09.009

参考文献(References)：

• [1]Fu Han-guang,Xiao Qiang,Fu Han-feng.Heat treatment of multi-element low alloy wear-resistant steel[J].Materials Science and Engineering A,2005,396(1-2):206-212.
• [2]Jiang Zhi-qiang,DU Jian-ming,FENG Xi-lan.Study and application of heat treatment of multi-element wear-resistant low-alloy steel[J].Journal ofIron and Steel Research,International,2006,13(1):57-61.
• [3]李红斌,姚连登,赵小婷.新型高强高韧耐磨钢的显微组织与性能[J].机械工程材料,2010,34(7):46-48.LI Hong-bin,YAO Lian-deng,ZHAO Xiao-ting.Microstructure and properties of new wear resistance steel with high strength and high toughness[J].Materials for Mechanical Engineering,2010,34(7):46-48.
• [4]Suchánek J,Kuklík V.Influence of heat and thermochemical treatment on abrasion resistance of structural and tool steels[J].Wear,2009,267(11):2100-2108.
• [5]左秀荣,陈蕴博,王淼辉.铁素体/马氏体双相钢的组织及性能[J].材料热处理学报,2010,31(1):29-34.ZUO Xiu-rong,CHEN Yun-bo,WANG Miao-hui.Microstructure and mechanical properties of ferrite/martensite dual-phase steel[J].Transactions ofMaterials and Heat Treatment,2010,31(1):29-34.
• [6]Lis J,Lis A K,Kolan C.Processing and properties of C-Mn steel with dual-phase microstructure[J].Journal of Materials Processing Technology,2005,162-163:350-354.
• [7]Bag A,Ray K K,Dwarakadasa E S.Influence of martensite content and morphology on tensile and impact properties of high-martensite dual-phasesteels[J].Metallurgical and Materials Transactions A,1999,30(5):1193-1202.
• [8]Anand Prakash Modi.Effects of microstructure and experimental parameters on high stress abrasive wear behaviour of a 0.19wt%C dual phase steel[J].Tribology International,2007,40(3):490-497.
• [9]Ibrahim Sevim,I Barlas Eryurek.Effect of abrasive particle size on wear resistance in steels[J].Materials&Design,2006,27(3):173-181.
• [10]王存宇,时捷,刘苏,等.淬火-配分-回火工艺处理钢的三体冲击磨损性能研究[J].材料研究学报,2009,23(3):305-310.WANG Cun-yu,SHI Ji,LIU Su,et al.Study on three-body impact-abrasion of steel treated by quenching-partitioning-tempering process[J].ChineseJournal of Materials Research,2009,23(3):305-310.

文章评论(Comment)：