张程,金自力,任慧平,康学良,李兵磊

• 1:内蒙古科技大学材料与冶金学院
• 2:内蒙古自治区白云鄂博矿多金属资源综合利用重点实验室

摘要(Abstract)：

利用SEM、EBSD和XRD等相关技术,研究了脱碳退火工艺对基于CSP工艺取向硅钢再结晶退火后的组织、晶界特征及析出相的影响。结果表明,脱碳退火5 min后,取向硅钢的再结晶晶粒尺寸较小,晶界特征理想,高能晶界Σ3和Σ9富集在{111}<112>、{112}<1 10>和{332}<533>等有利取向周围,促进了二次再结晶过程中高斯晶粒的形成;退火时间为7 min时,大角度晶界和{111}<112>、{112}<1 10>、{332}<533>等有利取向数量下降,不利于高斯晶粒的形核和长大;经不同脱碳退火工艺(3 min、5 min和7 min),析出相总体呈弥散状态分布,析出物在脱碳退火5 min的析出细小且分布均匀。

关键词(KeyWords)： 取向硅钢;薄板坯连铸连轧(CSP);抑制剂;晶界特征

Abstract:

Keywords:

基金项目(Foundation): 内蒙古自治区科技计划项目(414060901);; 内蒙古自治区自然科学基金(2015MS0551)

作者(Author): 张程,金自力,任慧平,康学良,李兵磊

DOI: 10.13289/j.issn.1009-6264.2016.04.015

参考文献(References)：

• [1]崔正强,曾燕屏,毛卫民.热轧及常化退火工艺对硅钢冷轧织构的影响[J].电工材料,2006(4):40-42.CUI Zheng-qiang,ZENG Yan-ping,MAO Wei-min.Effect of hot rolling and normalizing annealing pocesses on the cold rolled texture of silicon steel[J].Electrical Engineering Materials,2006(4):40-42.
• [2]张贞贞,任卫,方建锋.低温板坯加热取向硅钢形变和初次再结晶织构的演变规律[J].钢铁,2011,46(8):83-88.ZHANG Zhen-zhen,REN Wei,FANG Jian-feng.Texture evolution of the primary recrystallization and deformation of grain-oriented electrical steel with low temperature slab reheating[J].Iron and Steel,2011,46(8):83-88.
• [3]方建锋,赵宇,田志凌,等.低温板坯加热晶粒取向3%Si钢高温退火中组织演化[J].特殊钢,2010,31(4):64-67.FANG Jian-feng,ZHAO Yu,TIAN Zhi-ling,et al.Structure evolution of grain-oriented 3%Si steel with low temperature slab reheating in high temperature annealing[J].Special Steel,2010,31(4):64-67.
• [4]余永宁.金属学原理[M].北京:冶金工业出版社,2000.
• [5]Rajmohan N,Szpunar J A,Hayakawa Y.A role of fractions of mobile grain boundaries in secondary recrystallization of Fe-Si steels[J].Acta Materialia,1999,47(10):2999-3008.
• [6]Gladman T.On the theory of the effect of precipitate particles on grain growth in metals[J].Proceedings of the Royal Society of London.Series A,Mathematical and Physical Sciences,1966,294(1438):298-309.
• [7]Rios P R.Overview No.62:A theory for grain boundary pinning by particles[J].Acta Metallurgica,1987,35(12):2805-2814.
• [8]Chang S K.Texture change from primary to secondary recrystallization by hot-band normalizing in grain-oriented silicon steels[J].Materials Science and Engineering:A,2007,452(4):93-98.
• [9]Lin P,Palumbo G,Harase J,et al.Coincidence site lattice(CSL)grain boundaries and Goss texture development in Fe-3%Si alloy[J].Acta Materialia,1996,44(12):4677-4683.
• [10]雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006.
• [11]安治国,毛卫民.取向电工钢中Mn S粒子析出形核行为[J].材料热处理学报,2010,31(2):45-50.AN Zhi-guo,MAO Wei-min.Precipitation nucleation behaviors of Mn S particles in a grain-oriented electrical steel[J].Transactions of Materials and Heat Treatment,2010,31(2):45-50.
• [12]孙颖,李军,赵宇,等.采用低温板坯加热工艺生产的取向硅钢中抑制剂的研究[J].钢铁,2009(5):64-67.SUN Ying,LI Jun,ZHAO Yu,et al.Experimental research of inhibitors in grain oriented electrical steel prepared by low slab reheating temperature technique[J].Iron and Steel,2009(5):64-67.
• [13]Lee Byeong-Joo,Sundman B,KIM Sung II,et al.Thermodynamic calculations on the stability of Cu2S in low carbon steels[J].ISIJ International,2007,47(1):163.
• [14]Guillet A,ES-Sadiqi E,L’Espérance G,et al.Microstructure and mechanical properties of strip cast 1008 steel after simulated coiling,cold rolling and batch annealing[J].ISIJ International,1996,36(9):1190.

文章评论(Comment)：