陶凯,于慎君,王继生,周香林,崔华,张济山

• 1:中信重工机械股份有限公司
• 2:河南省大型铸锻件工程技术研究中心
• 3:北京科技大学新金属材料国家重点实验室
• 4:北京科技大学材料科学与工程学院

摘要(Abstract)：

采用空气助燃超音速火焰(HVAF)喷涂技术,分别以相同成分的气雾化合金粉体和低温球磨纳米晶合金粉体作为喂料,制备出高质量的耐磨耐蚀粗晶和纳米晶NiCrC合金涂层。利用SRV摩擦磨损试验机、表面形貌仪和扫描电镜等设备对两种涂层和45钢试样的滑动摩擦磨损行为进行了对比研究。结果表明:在载荷为10～30 N的无润滑剂常温滑动摩擦条件下,两种涂层具有较为接近的滑动摩擦系数,但纳米晶NiCrC涂层的抗磨损性能远优于常规粗晶涂层。三种测试材料都呈现出磨粒磨损和粘着磨损的特征,随着载荷的增加,磨损程度逐渐加剧,同时粘着磨损的特征更加突出。此外,两种涂层材料在磨损过程中都出现了颗粒部分或整体剥落的现象,加剧了涂层的磨损程度。

关键词(KeyWords)： 超音速火焰;纳米晶;涂层;磨损;NiCrC

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 陶凯,于慎君,王继生,周香林,崔华,张济山

DOI: 10.13289/j.issn.1009-6264.2012.05.011

参考文献(References)：

• [1]徐滨士,刘世参,王海斗.二十一世纪的纳米表面工程[J].机械制造与自动化,2005,34(3):1-4,8.XU Bin-shi,LIU Shi-can,WANG Hai-dou.Nano surface engineering in the 21st century[J].Machine Building and Automation,2005,34(3):1-4,8.
• [2]Tao K,zhang J S,Cui H,et al.Fabrication of conventional and nanostructured NiCrC coatings via HVAF technique[J].Transactions of NonferrousMetals Society of China,2008,18:262-269.
• [3]Tao K,Zhou X L,Cui H,et al.Microhardness variation in heat-treated conventional and nanostructured NiCrC coatings prepared by HVAF spraying[J].Surface and Coatings Technology,2009,203:1406-1414.
• [4]Cui H,Tao K,Zhou X L,et al.Thermal stability of nanostructured NiCrC coating prepared by HVAF spraying of cryomilled powders[J].Rare Metals,2008,27(4):418-424.
• [5]Tao K,Zhou X L,Cui H,et al.Preparation and properties of a nanostructured NiCrC alloy coating for boiler tubes protection[J].MaterialsTransactions,2008,49(9):2159-2162.
• [6]Tao K,Zhou X L,Cui H,et al.Oxidation and hot corrosion behaviors of HVAF-sprayed conventional and nanostructured NiCrC coatings[J].Transactions of Nonferrous Metals Society of China,2009,19:1151-1160.
• [7]Tao K,Cui H,Zhou X L,et al.Synthesis of nanocrystalline NiCrC alloy feedstock powders for thermal spraying by cryogenic ball milling[J].International Journal of Minerals,Metallurgy and Materials,2009,16(1):77-83.
• [8]梁志杰,乔玉林,孙晓峰,等.钢-钢摩擦副在不同润滑和接触形式下的高温减摩性能的研究[J].润滑与密封,2006,175(3):19-21.LIANG Zhi-jie,QIAO Yu-lin,SUN Xiao-feng,et al.The effect of test parameters on high temperature friction coefficient of steel-steel pairs at differentlubrication and contact conditions[J].Lubrication Engineering,2006,175(3):19-21.
• [9]ChenH,Lee S,Zheng X,et al.Evaluation of unlubricated wear properties of plasma-sprayed nanostructured and conventional zirconia coatings by SRVtester[J].Wear,2006,260:1053-1060.
• [10]赵晓琴,周惠娣,陈建敏.等离子喷涂纳米和常规喂料WC-Co涂层在干摩擦和水环境中的摩擦磨损性能研究[J].摩擦学学报.2006,26(3):208-213.ZHAO Xiao-qin,ZHOU Hui-di,CHEN Jian-min,et al.Friction and wear behavior of WC-Co coatings sprayed by nanoscale and conventional powdersin dry and water environment[J].Tribology,2006,26(3):208-213.
• [11]彭海涛,金元生,方键文,等.金属-陶瓷复合涂层摩擦学特性的SEM和SEAM研究[J].无机材料学报,2001,16(1):110-116.PENG Hai-tao,JIN Yuan-sheng,FANG Jian-Wen,et al.SEM and SEAM study on tribological performance of metal/ceramic composite coatings[J].Journal of Inorganic Materials,2001,16(1):110-116.

文章评论(Comment)：