陈伟,李龙飞,杨王玥,孙祖庆,何建平

• 1:北京科技大学新金属材料国家重点实验室
• 2:北京科技大学材料科学与工程学院

摘要(Abstract)：

利用Gleeble 1500热模拟试验机进行单轴热压缩实验,研究了含Al过共析钢和不含Al过共析钢过冷奥氏体形变过程中,形变温度和应变速率对组织演变的影响。结果表明:过共析钢过冷奥氏体形变过程中的动态转变经历动态相变和相变所得珠光体的动态球化、超细化。过冷奥氏体动态相变抑制晶界网状渗碳体的形成。动态转变所经历的两个过程均为热激活过程,受形变温度和应变速率的影响。降低形变温度,使过冷度增加;降低应变速率,使完成应变的时间延长,两者均减小了过冷奥氏体完成动态相变所需的应变量,使相变所得的珠光体经历的变形程度增加,有利于珠光体实现球化、超细化。合金元素Al的添加阻碍铁、碳原子的扩散,推迟过冷奥氏体动态相变的发生,细化所得的球化、超细化复相组织。

关键词(KeyWords)： 过共析钢;过冷奥氏体;动态转变;铝;工艺参数

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(50471092);; 教育部博士点基金(20050008017)

作者(Author): 陈伟,李龙飞,杨王玥,孙祖庆,何建平

参考文献(References)：

• [1]Sherby O D,Walser B,Young C M,et al.Superplastic ultra-high carbon steels[J].Scr Metall,1975,9(5):569-573.
• [2]Sherby O D,Oyama T,Kum D W,et al.Ultrahigh carbon steels[J].J Met,1985,37(6):50-56.
• [3]Oyama T,Sherby O D,Wadsworth J,et al.Application of the divorced eutectoid transformation to the development of fine-grained,spheroidized structuresin ultrahigh carbon steels[J].Scr Metall,1984,18(8):799-804.
• [4]Furuhara T,Mizoguchi T,Maki T.Ultra-fine(α+θ)duplex structure formed by cold rolling and annealing of pearlite[J].ISIJ Int,2005,45(3):392-398.
• [5]Carsi M,Vicente A F,Sherby O D,et al.Thermomechanical treatments of ultrahigh carbon steels and optimal microstructures to improve toughness[J].Mater Sci Form,2007,539-543(5):4826-4831.
• [6]Syn C K,Lesuer D R,Goldberg A,et al.Mechanical and thermal properties of ultra-high carbon steel containing aluminum[J].Mater Sci Form,2007,539-543(5):4844-4849.
• [7]Wang B Q,Song X Y,Peng H F.Design of a spheroidization processing for ultrahigh carbon steels containing Al[J].Mater Design,2007,28(2):562-568.
• [8]Zhang J G,Lin Y.J,Hillert M,et al.Microstructure and mechanical properties of spray formed ultrahigh-carbon steels[J].Maters Sci Eng A,2004,383:45-49.
• [9]Sun Z Q,Yang W Y,Qi J J,et al.Deformation enhanced transformation and dynamic recrystallization of ferrite in a low carbon steel during multipass hotdeformation[J].Mater Sci Eng A,2002,334(1-2):201-207.
• [10]杨王,齐俊杰,孙祖庆,等.低碳钢形变强化相变的特征[J].金属学报,2004,40(2):135-140.YANG Wang-yue,QI Jun-jie,SUN Zu-qing.Characteristics of deformation enhanced transformation in low carbon steel[J].Acta Metall Sin,2004,40(2):135-140.
• [11]陈国安,杨王,孙祖庆.中碳钢过冷奥氏体形变过程中的组织演变[J].金属学报,2007,43(1):27-34.CHEN Guo-an,YANG Wang-yue,SUN Zu-qing.Microstructure evolution of medium carbon steel during deformation of undercooled austenite[J].ActaMetall Sin,2007,43(1):27-34.
• [12]黄青松,李龙飞,杨王,等.共析钢过冷奥氏体动态相变和组织超细化[J].金属学报,2007,43(7):724-730.HUANG Qing-song,LI Long-fei,YANG Wang-yue,et al.Dynamic transformation of undercooling austenite and microstructure refinement in a eutectoid steel[J].Acta Metall Sin,2007,43(6):724-730.
• [13]Li L F,Yang W Y,Sun Z Q.Microstructure evolution of a pearlitic steel with the initial microstructure of undercooled austenite during hot deformation andsubsequent annealing[J].Metall Mater Trans A,2007,39A(3):624-635.
• [14]陈伟,李龙飞,杨王,等.过共析钢过冷奥氏体形变过程中的组织超细化[J].材料研究学报,2008,22(4):374-379.CHEN Wei,LI Long-fei,YANG Wang-yue,et al.Ultra-refinement of hypereutectoid steel during deformation of undercooled austenite[J].Chin J MaterRes,2008,22(4):374-379.
• [15]陈伟,李龙飞,杨王,等.Al对过共析钢缓冷相变和过冷奥氏体动态相变组织的影响[J].金属学报,2008,44(9):626-630.CHEN Wei,LI Long-fei,YANG Wang-yue,et al.Effects of aluminum on the microstructures of transformation during slow cooling and dynamic phasetransformation of undercooled austenite of hypereutectoid steel[J].Acta Metall Sin,2008,44(9):626-630.
• [16]田景,杨王,孙祖庆.工艺参数对低碳钢形变强化相变的影响[J].材料热处理学报,2005,26(5):62-67.TIAN Jing,YANG Wang-yue,SUN Zu-qing.Influence of process parameters on the deformation enhanced ferrite transformation in a low carbon steel[J].Trans Mater Heat Treat,2005,26(5):62-67.
• [17]黄青松,杨王,孙祖庆.过冷对共析钢动态相变和组织演变的影响[J].材料研究学报,2007,21(6):593-598.HUANG Qing-song,YANG Wang-yue,SUN Zu-qing.Influence of undercooling on dynamic transformation and microstructure evolution in eutectoid steel[J].Chin J Mater Res,2007,21(6):593-598.
• [18]齐俊杰,杨王,孙祖庆.低碳钢过冷奥氏体形变过程超细铁素体的形成[J].金属学报,2002,38(9):897-902.QI Jun-jie,YANG Wang-yue,SUN Zu-qing.Ultra-fine ferrite formation during deformation of undercooled austenite in a low carbon steel[J].Acta MetallSin,2002,38(9):897-902.
• [19]Song R,Ponge D,Raabe D,et al.Microstructure and crystallographic texture of an ultrafine grained C-Mn steel and their evolution during warm deformationand annealing[J].Acta Mater,2005,53:845-858.
• [20]Robbins J L,Shepard O C,Sherby O D.Accelerated spheroidization of eutectoid steels by concurrent deformation[J].J Iron Steel Inst,1964,202:804-807.
• [21]Harrigan M J,Sherby O D.Kinetics of spheroidization of a eutectoid composition steels an influenced by concurrent straining[J].Mater Sci Eng,1971,7:177-189.
• [22]周荣锋,杨王,孙祖庆,等.不同形变速率条件下低碳钢过冷奥氏体形变过程铁素体超细化[J].北京科技大学学报,2004,26(5):512-518.ZHOU Rong-feng,YANG Wang-yue,SUN Zu-qing,et al.Formation of ultra-fine ferrite in low carbon steel during deformation at different strain rates ofundercooled austenite[J].J Univ Sci Technol Beijing,2004,26(5):512-518.
• [23]Frommeyer G,Jimenez J A.Structural superplasticity at higher strain rates of hypereutectoid Fe-5.5Al-1Sn-1Cr-1.3C steel[J].Metall Mater Trans,2005,36A(2):295-300.
• [24]Leslie W C,Rauch G.C.Precipitation of carbides in low-carbon Fe-Al-C alloys[J].Metall Trans,1978,9A(3):343-349.

文章评论(Comment)：