雷声,刘全坤,缪宪文,桂中祥,吴跃波,马灿

• 1:安徽建筑工业学院
• 2:合肥工业大学

摘要(Abstract)：

应用激光相变硬化技术进行GCr15轴承钢激光强化处理试验,通过三点弯曲试验研究钢件经激光硬化处理后获得的激光硬化层对钢件抗弯强度和挠度的影响,弯曲试验时材料的塑性用各试样的最大挠度来表示。结果表明,经激光硬化处理后钢件的抗弯强度和挠度明显下降,断裂机制也发生了改变,导致了激光硬化层塑性和韧性的下降。对常规热处理试样和激光表面处理试样断口进行了对比分析,常规热处理试样断裂后断裂表面均表现出韧性断裂后的韧窝特征,激光硬化层起裂区呈现脆性特征,断裂方式主要为准解理和沿晶断裂。

关键词(KeyWords)： 激光硬化层;弯曲强度;挠度;断裂

Abstract:

Keywords:

基金项目(Foundation): 安徽省教育厅自然科学重点资助项目(KJ2009A021)

作者(Author): 雷声,刘全坤,缪宪文,桂中祥,吴跃波,马灿

DOI: 10.13289/j.issn.1009-6264.2010.05.023

参考文献(References)：

• [1]石娟,吴钢,范雪燕,等.激光淬火齿轮的疲劳寿命和耐磨性试验研究[J].上海海运学院学报,2004,25(1):92-96.SHI Juan,WU Gang,FAN Xue-yan,et al.The test and study of fatigue life and wear resistance of laser hardening gear[J].Journal of Shanghai Maritime University,2004,25(1):92-96.
• [2]徐颖强,赵宁,吕国志.航空齿轮表面硬化层断裂性能研究[J].西北工业大学学报,2002,20(3):356-359.XU Ying-qiang,ZHAO Ning,LU Guo-zhi.On exploring fracture behavior of surface hardened layer as related to fatigue life of aero-gear[J].Journalof Northwestern Polytechnical University,2002,20(3):356-358.
• [3]郑修麟.材料的力学性能[M].西安:西安工业大学出版社,1996:98-100.
• [4]葛海平,朱祖昌,顾剑锋,等.激光处理对GCr15钢表面组织和硬度的影响[J].上海金属,2004,26(3):1-4.GE Hai-ping,ZHU Zu-chang,GU Jian-feng,et al.Effect of laser treatment on microstracture and hardness of GCr15 steel[J].Shanghai Metals,2004,26(3):1-4.
• [5]Komanduri R,Hou Z B.Thermal analysis of the laser surface transformation hardening process[J].International Journal of Heat and Mass Transfer,2001,44(6):2845-2862.
• [6]邹湘军,娄燕,欧阳八生,等.GCr15钢激光淬火及其应用[J].金属热处理,2004,29(5):15-18.ZOU Xiang-jun,LOU Yan,OU YANG ba-sheng,et al.Laser-beam hardening of steel GCr15 and its application[J].Heat Treatment of Metals,2004,29(5):15-18.
• [7]王建忠,隗晓云,徐晋勇,等.Q235钢表面复合强化处理后的拉伸强度[J].中国表面工程,2005,18(6):21-24.WANG Jian-zhong,KUI Xiao-yun,XU Jin-yong,et al.Tensile strength of Q235 steel after compound surface strengthening treatment[J].China Surface Engineering,2005,12(6):21-24.
• [8]孙茂才.金属力学性能[M].哈尔滨:哈尔滨工业大学出版社,2003:66-92.
• [9]Mehmet Erdogan.The effect of martensite particle size on tensile fracture of surface carburised AISI 8620 steel with dual phase core microstructure[J].Materials and Design,2002,23(6):597-604.
• [10]薛蕾,陈静,林鑫,等.激光快速修复Ti-6Al-4V合金的显微组织与力学性能[J].稀有金属材料与工程,2007,36(6):989-993.XUE Lei,CHEN Jing,LIN Xin,et al.Microstructures and mechanical properties of laser rapid repaired Ti-6Al-4V alloy[J].Rare Metal Materialsand Engineering,2007,36(6):989-993.
• [11]王海棠,李元东,杨贵荣,等.负压铸渗法制备铸铁表面Ni/WC复合渗层三点弯曲性能测试[J].中国表面工程,2008,21(4):22-26.WANG Hai-tang,LI Yuan-dong,YANG Gui-rong,et al.Three-point bending behavior of surface composite Ni/WC on cast iron substrate producedby vacuum infiltration casting[J].China Surface Engineering,2008,21(4):22-26.

文章评论(Comment)：