干燥方式对钛表面化学转化膜形貌和耐腐蚀性能影响Influence of drying process on structure and corrosion performance of chemical conversion coating on titanium
郑勇振,王铃铃,姜葱葱,刘冰,肖桂勇,吕宇鹏
摘要(Abstract):
采用低温化学转化法,在钛表面制备化学转化膜。利用X射线衍射仪(XRD)、热场发射扫描电镜(FE-SEM)、能谱仪(EDS)和电化学工作站对转化膜进行了表征。结果表明,不同的干燥方式对化学转化膜的微观形貌及耐腐蚀性能有明显的影响。相较于先洗后干的干燥方式,先干后洗的转化膜,晶粒细小,致密度提高,同时形成多孔结构,涂装性能和耐蚀性能得到改善。
关键词(KeyWords): 钛;化学转化;多孔结构;干燥方式
基金项目(Foundation): 山东省科技发展计划(2014GGX102031);; 山东省自然科学基金(ZR2013EM013)
作者(Author): 郑勇振,王铃铃,姜葱葱,刘冰,肖桂勇,吕宇鹏
DOI: 10.13289/j.issn.1009-6264.2016.s1.021
参考文献(References):
- [1]赵永庆.国内外钛合金研究的发展现状及趋势[J].中国材料进展,2010,29(5):1-8.ZHAO Guo-qing.The present situation and tendency of the development of titanium alloy research at home and abroad[J].Materials China,2010,29(5):1-8.
- [2]屠振密,李宁,朱永明.钛及钛合金表面处理技术和应用[M].北京:国防工业出版社,2010,18-29.TU Zhen-mi,LI Ning,ZHU Yong-ming.Application and Technology on Surface Treatment of Titanium and Titanium Alloys[M].Beijing:National Defence Industry Press,2010,18-29.
- [3]刘凤岭,李金桂,冯自修.钛合金表面技术的进展[J].腐蚀与防护,2001,22(2):54-57.LIU Feng-ling,LI Jin-gui,FENG Zi-xiu.The progress of the titanium alloy surface technology[J].Corrosion and Protection.2001,22(2):54-57.
- [4]李异.金属表面转化膜技术[M].北京:化学工业出版社,2009.LI Yi.The Metal Surface Conversion Coating Technology[M].Beijing:Chemical Industry Press,2009.
- [5]Hanetho S M,Kaus I,Bouzga A,et al.Synthesis and characterization of hybrid aminopropyl silane-based coatings on stainless steel substrates[J].Journal of the National Womens Education Center of Japan,2014,238(2):1-8.
- [6]Narayanan T S N S.Surface pretreatment by phosphate conversion coatings-A review[J].Rev Adv mater Sci,2005,9(2):130-177.
- [7]Bogi J,Macmillan R.Phosphate conversion coatings on steel[J].Journal of Materials Science,1977,12(11):2235-2240.
- [8]OSKUIE A A,AFSHAR A,HASANNEJAD H.Effect of current density on DC electrochemical phosphating of stainless steel 316[J].Surface&Coatings Technology,2010,205(7):2302-2306.
- [9]Flis J,Mańkowski J,Zakroczymski T,et al.The formation of phosphate coatings on nitrided stainless steel[J].Corrosion Science,2001.43(9):1711-1725.
- [10]李新立,李安忠,万军.金属磷化技术的回顾与展望[J].材料保护,2000,33(1):71-73.LI Xin-li,LI An-zhong,WAN Jun.Retrospect and prospect of metal phosphating technology[J].Materials Protection,2000,33(1):71-73.
- [11]Zhao X,Xiao G,Zhang X,et al.Ultrasonic induced rapid formation and crystal refinement of chemical conversed hopeite coating on titanium[J].Journal of Physical Chemistry C,2014,118(4):1910-1918.
- [12]兰伟.镁合金表面磷酸盐转化膜研究[J].金属热处理,2007,32(6):66-68.LAN Wei.Phosphate conversion coating research on magnesium alloy surface[J].Heat Treatment of Metals,2007,32(6):66-68.
- [13]Gray J E,Luan B.Protective coatings on magnesium and its alloys—a critical review[J].Journal of Alloys&Compounds,2002,336(1/2):88-113.
- [14]Fang L,Xie L B,Li Y.Study on the growth and corrosion resistance of manganese phosphate coatings on 30Cr Mn Mo Ti alloy steel[J].Physics Procedia,2011,18(6):227-233.
- [15]Xiao G Y,Zhao X C,Zhang X,et al.Electric field induced rapid formation of novel structural hopeite coating on titanium[J].Materials Letters,2015,144:30-32.
- [16]Zhang X,Xiao G Y,Jiang C C,et al.Influence of process parameters on microstructure and corrosion properties of hopeite coating on stainless steel[J].Corrosion Science,2015,94:428-437.
- [17]Aikens D A.Electrochemical methods,fundamentals and applications[J].Journal of Chemical Education,2000,275(60):669-676.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||