吕科,李军,赵宇,李波

• 1:安泰科技股份有限公司功能材料事业部
• 2:中国钢研科技集团有限公司

摘要(Abstract)：

在实验室中采用无抑制剂法制备取向硅钢,利用XRD、TEM等方法研究了冷轧和初次再结晶阶段的微观组织与织构。结果表明,冷轧板织构主要由α织构和γ织构组成;初次再结晶退火后α织构减弱,γ面织构{111}<112>增加,初次再结晶退火70 s后出现Goss织构。EBSD分析显示Goss位向晶粒大多与{111}<112>位向晶粒相邻;随退火时间的增加,Goss和{111}<112>位向晶粒均有所增加。

关键词(KeyWords)： 无抑制剂取向硅钢;初次再结晶退火;织构;EBSD

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 吕科,李军,赵宇,李波

DOI: 10.13289/j.issn.1009-6264.2015.s2.022

参考文献(References)：

• [1]何忠治,赵宇,罗海文.电工钢[M].北京:冶金工业出版社,2012.
• [2]Hayakawa Y.Grain-oriented magnetic steel sheet having No undercoat film comprising forsterite as primary component and having good magnetic characteristics[P].US Patent:2005-6942740B2.
• [3]Hayakawa Y.Method of making grain-oriented magnetic steel sheet having low iron loss:US Patent,2007-RE39482E[P].2007.
• [4]Hayakawa Y.Grain-oriented magnetic steel sheet having no undercoat film comprising forsterite as primary component and having good magnetic characteristics[P].US Patent:2008-7371291B2.
• [5]Duun C G.Cold-rolled and primary recrystallization textures in cold-rolled single crystals of silicon iron[J].Acta Metall,1954,2:173-183.
• [6]李军,孙颖,赵宇,等.取向硅钢板坯加热温度对热轧及冷轧板织构的影响[J].钢铁研究学报,2009,21(3):42-45.LI Jun,SUN Ying,ZHAO Yu,et al.Effect of slab reheating temperature on hot rolling and cold rolling texture of grain oriented silicon steel sheet[J].Journal of Iron and Steel Research,2009,21(3):42-45.
• [7]Mishar S,Darmann C,Lucke K.On the development of the Goss texture in iron-3%silicon[J].Acta Metall,1984,32(12):2185-2201.
• [8]Matsuo M,Sakai T,Tanino M,et al.6th International Conference on Textures of Materials[C]∥The Iron and Steel Institute of Japan,Tokyo:1981,927-981.
• [9]毛卫民,杨平.电工钢的材料学原理[M].北京:高等教育出版社,2013.
• [10]吕其春,帅仁杰,周秀媛,等.高磁感取向硅钢轧制和再结晶织构的研究[J].金属学报,1981,17(1):58-67.LQi-chua,SHUAI Ren-jie,ZHOU Xiu-yuan,et al.A study on the deformation and primary recrystallization texture in a Mn S-Al N-inhibited 3%silicon steel[J].Acta Metallurgica Sinia,1981,17(1):58-67.
• [11]Samet-Meziou A,Etter A L,Baudin T,et al.TEM study of recovery and recrystallization mechanisms after 40%cold rolling in an IF-Ti steel[J].Scripta Mater,2005,53:1001-1006.
• [12]Oyarzabal M,Martinez-de-Guerenu A,Gutierrez I.Effect of stored energy and recovery on the overall recrystallization kinetics of a cold rolled low carbon steel[J].Materials Science and Engineering A,2008,485:200-209.
• [13]Shimizu R,Harase J.Coincidence grain boundary and texture evolution in Fe-3%Si[J].Acta Metallurgica,1989,37(2):1241~1249.
• [14]Harase J,Shimizu R.Investigation on the texture evolution by recrystallization and grain Growth of cold rolled{110}<001>single crystal in Fe-3%Si[J].Journal of the Japan Institute of Metals,1991,55(6):615~621.
• [15]Hayakawa Y,Szpunar J A.A new model of Goss texture development during secondary recrystallization of electrical steel[J].Acta Materialia,1997,45(11):4713~4720.
• [16]Hayakawa Y,Muraki M,Szpunar A.The changes of grain boundary character distribution during the secondary recrystallization of electrical Steel[J].Acta Materialia,1998,46(3):1063~1073.

文章评论(Comment)：