原效坤,许并社

• 1:北京航空航天大学材料科学与工程学院
• 2:太原理工大学材料科学与工程学院 北京100083
• 3:太原030024

摘要(Abstract)：

有机硅树脂已经成为结构陶瓷的重要连接剂之一。本文综述了用有机硅树脂连接SiC和Si3N4陶瓷的研究现状,以及用有机硅树脂连接结构陶瓷的研究方向,并报导了用有机硅树脂YR3370连接SiC陶瓷以及连接SiC陶瓷基复合材料的工作。

关键词(KeyWords)： 有机硅树脂;结构陶瓷;陶瓷连接;YR3370

Abstract:

Keywords:

基金项目(Foundation): 国家973资助项目(2004CB217808);; 国家自然科学基金资助项目(20271037)

作者(Author): 原效坤,许并社

参考文献(References)：

• [1]张长瑞,郝元恺.陶瓷基复合材料[M].长沙:国防科技大学出版社,2001.
• [2]Yajima S,Okamura K,Shishido T,et al.Joining of SiC to SiC using polyborosiloxane[J].American Ceramic Society Bulletin,1981,60(20):253-253.
• [3]Peng P,Lu Y,Liu X Y,et al.Study of preceramic polymers[J].Microchemical Journal,1996,53:273-281.
• [4]Colombo P,Sglavo V,Pippel E,et al.Joining of reaction-bonded silicon carbide using a preceramic polymer[J].Journal of Materials Science,1998,33(9):2405-2412.
• [5]Danko G A,Silberglitt R,Colombo P,et al.Comparison of microwave hybrid and conventional heating of preceramic polymers to form silicon carbide andsilicon oxycarbide[J].Journal of the American Ceramic Society,2000,83(4):1617-1625.
• [6]原效坤,李树杰,张听.用有机硅树脂YR3370连接RBSiC陶瓷[J].航空学报(拟录用).
• [7]Lewinsohn C A,Colombo P,Reimanis I,et al.Stresses occurring during joining of ceramics using preceramic polymers[J].Journal of the American CeramicSociety,2001,84(10):2240-2244.
• [8]Yu S.Net-Shape Formation of bulk composite materials via the porolysis of poly(siloxanes)filled with chemically active titanium and inactive silicon carbidefillers[D].Newark:State University of New Jersey,1996.
• [9]Pivin J C,Colombo P,Vassileva M S,et al.Ion-induced conversion of polysiloxanes and polycarbosilanes into ceramics:Mechanisms and properties[J].Nuclear Instruments and Methods in Physics Research(B),1998,141:652-662.
• [10]Wei Q,Pippel E,Woltersdorf J,et al.Interfacial SiC formation in polysiloxane-derived Si-O-C ceramics[J].Materials Chemistry and Physics,2002,73:281-289.
• [11]Rocha R M,Scheffler M,Greil P,et al.Ceramic tapes of Si-Al-O-N-C compounds using mixtures of polyssiloxane and Si-Al2O3 fillers[J].Ceramica,2005,51:42-51.
• [12]Schiavon M A,Radovanovic E,Yoshida I V P.Microstructural characterisation of monolithic ceramic matrix composites from polysiloxane and SiC powder[J].Powder Technology,2002,123:232-241.
• [13]所俊,陈朝辉,韩卫敏,等.硅树脂高温转化陶瓷结合层连接陶瓷材料[J].硅酸盐学报,2005,33(3):386-390.
• [14]Henager C H,Jones R H.Joining SiC ceramics using displacement reactions[J].Ceramic Transactions,1997,77:117-119.
• [15]范召东,谢择民.星形聚硅氧烷的热稳定性研究和结构表征[J].高分子学报,2000,5:590-593.
• [16]Pippel E,Woltersdorf J,Colombo P,et al.Structure and composition of interlayers in joints between SiC bodies[J].Journal of European Ceramic Society,1997,17:1259-1265.
• [17]Silberglitt R,Danko G A,Colombo P.Microwave joining of SiC[R].ORNL/TM-1999/83.Oak Ridge:AIM,1999.
• [18]Sherwood W J,Whitmarsh C K,Jacobs J M,et al.Joining ceramic composites using active Metal/HPCS preceramic polymer slurries[J].CeramicEngineering Science Proceeding,1997,18:177-184.
• [19]Interrante L V,Moraes K,Liu Q,et al.Silicon-based ceramics from polymer precursors[J].Pure and Applied Chemistry,2002,74(11):2111-2117.
• [20]Wang C,Wang J,Park C B,et al.Cross-linking behavior of a polysiloxane in preceramic foam processing[J].Journal of Materials Science,2004,39:4913-4915.
• [21]Rocha R M,Greilb P,Bressiania J C,et al.Complex-shaped ceramic composites obtained by machining compact polymer-filler mixtures[J].MaterialsResearch,2005,8(2):191-196.
• [22]Djamila B,Mario P,Corine G.Pyrolysis chemistry of polysilazane precursors to silicon carbonitride(part I)[J].Journal of Materials Chemistry,1997,7(1):109-116.
• [23]O’Brien M L,Koitzsch C,Nemanich R J.Photoemission of the SiO2-SiC heterointerface[J].Journal of Vacuum Science and Technology,2000,18(3):1176-1184.
• [24]Weinmann M,Zern A,Aldinger F.Stoichiometric silicon nitride/silicon carbide composites from polymeric precursors[J].Advanced Materials,2001,13(22):1704-1708.
• [25]Bujalski D R,Grigoras S,Lee W L,et al.Stoichiometry control of SiOC ceramics by siloxane polymer functionality[J].Journal of Materials Chemistry,1998,8(6):1427-1433.
• [26]Su Shun-xing,Zhang Zhi-jie,Zheng Zhi-min,et al.Anionic non-equilibrium ring-opening polymerization of octamethylcyclotetrasiloxane(D4)initiated bysilazyl-lithiums[J].Polymer International.2004,53:149-152.
• [27]Colombo P,Roisman T G,Scheffler M,et al.Conductive ceramic foams from preceramic polymers[J].Journal of the American Ceramic Society,2001,84(10):2265-2268.
• [28]Kim S H,Kim Y W,Park C B.Effect of inert filler addition on pore size and porosity of closed-cell silicon oxycarbide foams[J].Journal of MaterialsScience,2004,39:3513-3515.
• [29]Stackpoole M,Bordia R.Processing and properties of Si3N4matrix composites coatings and joints from filled pre-ceramic polymer systems[R].The Doe/OrnlEnvironmental Barrier Coatings Workshop.Nashville TN:[s.l.],2002.
• [30]Steven D.Silane-grafted moisture-crosslinkable polyethylene[R].66 Revised.Ohio:PolyOne Corporation,2002.
• [31]Dusseldorf.Educational materials,Bonding/Adhesives textbook.www.feica.com.
• [32]Gozzi M F,Radovanovic E,Yoshida I V P.Si3N4/SiC nanocomposite powder from a preceramic polymeric network based on poly(methylsilane)as the SiCprecursor[J].Materials Research,2001,4(1):13-17.
• [33]Gu H,Shinoda Y.Structural and chemical widths of general grain boundaries:modification of local structure and bonding by boron-doping in-βsilicon carbide[J].Interface Science,2000,8:269-278.
• [34]Buczko R,Pennycook S J,Pantelides S T.Bonding arrangements at hte Si-SiO2and SiC-SiO2interfaces and a possible origin of their constrasting properties[J].Physical Review Letters,2000,84(5):943-946.
• [35]Appiah K A,Wang Z L,Lackey W J.Texturing of polycrystalline SiC films on graphitic carbon in laminated composites grown by forced-flow chemical vaporinfiltration[J].Thin Solid Films,2000,371:114-118.
• [36]Wellmann P J,Herro Z G,Winnacker A.Analysis of graphitization during physical vapor transport growth of silicon carbide[J].Materials Science Forum,2004,457-460:55-58.
• [37]Xu Bing-she,Liu Xu-guang,Liang Wei,et al.New structured one-dimensional material-nano carbon surpentine tube[J].Transactions of Materials and HeatTreatment,2005,26(3):10-14.
• [38]Nascimento R M,Martinelli A E,Buschinelli A J A.Review article:recent advances in metal-ceramic brazing[J].Ceramica,2003,49:178-198.
• [39]Wang Y,Hadfield M.Rolling-contact fatigue of ceramics[A].in:American Society of Testing Materials ASM[M].ASM-Handbook,2002,11,Section 6E.
• [40]Unal O,Anderson I E,Maghsoodi S I.A test method to measure strength of ceramic joints at high temperatures[J].Journal of the American Ceramic Society,1997,80:1281-1284.
• [41]Zdaniewski W A,Conway J C,Kirchner H P.Affect of joint thickness and residual stresses on the properties of ceramic adhesive joints:II,Experimentalresults[J].Journal of the American Ceramic Society,1987,70(2):110-118.
• [42]Lessing P A,Erickson A W,Kunerth D C.Thermal cycling of siliconized-SiC at hightemperatures[J].Journal of Materials Science,2001,36:1389-1394.
• [43]Nishiguchi T,Nakamura M,Nishio K,et al.Suppression of the twin formation in CVD growth of(111)3C-SiC on(110)Si substrate[J].Materials ScienceForum,2004,483-485:193-196.
• [44]付善菊.短纤维增强聚硅氧烷复合材料的制备和性能研究[D].上海:华东理工大学,2000.
• [45]谢征芳.活性填料在先驱体转化陶瓷基复合材料及构件中的应用[D].长沙:国防科学技术大学,2001.
• [46]Scheerschmidt K.Molecular dynamics simulations of wafer bonding[J].Materials Research Society Symposium Proceedings,2001,681E:I2.3.1-I2.3.9.
• [47]Luo X,Qian G F,Wang E G.Molecular-dynamics simulation of Al/SiC interface structures[J].Physical Review B,1999,59(15):10125-10131.
• [48]Hild F,Raka B,Baudequin M,et al.Multiscale displacement field measurements of compressed mineral-wool samples by digital image correlation[J].Applied Optics,2002,41(2):6815-6827.
• [49]Zheng J C,Wang H Q,Wee A T S,et al.Trends in bonding configuration at SiC/III-V semiconductor interfaces[J].Applied Physics letters,2001,79(11):1643-1645.
• [50]Choi S R,Nemeth N N,Gyekenyesi J P.Slow crack growth of brittle materials with exponential crack-velocity formulation-Part I:Analysis[R].NASA/TM2002-21153.Cleveland,OH:NASA,2002.
• [51]Rubinstein A A.The fracture analysis of composites by a micromechanical approach[J].Composites Science and Technology,1998,58:1785-1792.

文章评论(Comment)：