杨亚杰,徐流杰

• 1:河南科技大学材料科学与工程学院
• 2:河南科技大学金属材料磨损控制与成型技术国家地方联合工程研究中心

摘要(Abstract)：

随着航空、军工、核工业等领域的不断发展，对在高温环境下工作的机械设备及其零部件提出了更高的要求。高温磨损是机械零部件主要的失效原因，耐磨相对金属材料的高温磨损性能起重要作用。本文综述了国内外含氧化物和碳化物等耐磨相的金属材料高温磨损性能的研究进展，分析了耐磨相在高温磨损中的作用。耐磨相一方面以细化晶粒的方式提高了金属基体的硬度和强度，从而改善耐磨性，另一方面在高温磨损过程中形成的氧化物促进了保护膜的形成，提高了材料的抗氧化性和高温耐磨性。

关键词(KeyWords)： 高温磨损;耐磨相;细晶强化;磨损机理

Abstract:

Keywords:

基金项目(Foundation): 国家重点研发计划(2022YFB3705300);; 河南省重大科技专项项目(221100230200)

作者(Author): 杨亚杰,徐流杰

DOI: 10.13289/j.issn.1009-6264.2023-0463

参考文献(References)：

• [1] 李昉.第二相增强合金的强化和高温蠕变研究[D].长沙：湖南大学，2021.LI Fang.Study on strengthening mechanism and high temperature creep theory in second phase strengthened alloys[D].Changsha:Hunnan University,2021.
• [2] 魏世忠，徐流杰.钢铁耐磨材料研究进展[J].金属学报，2020,56(4):523-538.WEI Shi-zhong,XU Liu-jie.Review on research progress of steel and iron wear-resistant materials[J].Acta Metallurgica Sinica,2020,56(4):523-538.
• [3] 揭晓华，毛志远.金属材料的高温磨损研究进展[J].材料导报，1996(2):16-19.JIE Xiao-hua,MAO Zhi-yuan.Research advance in wear of metal materials at high temperature[J].Materials Review,1996(2):16-19.
• [4] Stott F H,Lin D S,Wood G C.“Glazes” produced on nickel-base alloys during high temperature wear[J].Nature Physical Science,1973,242(118):75-77.
• [5] Blau P J.Elevated-temperature tribology of metallic materials[J].Tribology International,2010,43(7):1203-1208.
• [6] Hardell J,Kassfeldt E,Prakash B.Friction and wear behaviour of high strength boron steel at elevated temperatures of up to 800 ℃[J].Wear,2008,264(9/10):788-799.
• [7] 徐君莉.金属基复合材料第二相组织形态影响条件[J].南方冶金学院学报，2000(4):286-289.XU Jun-li.Research on the effect conditions to microstructure of the second morphology in Metal-Metrix composite[J].Journal of Southern Institute of Metallurgy,2000(4):286-289.
• [8] Sawla S,Das S.Combined effect of reinforcement and heat treatment on the two body abrasive wear of aluminum alloy and aluminum particle composites[J].Wear,2004,257(5/6):555-561.
• [9] Roy D,Kumari S,Mitra R,et al.Microstructure and mechanical properties of mechanically alloyed and spark plasma sintered amorphous-nanocrystalline Al65Cu20Ti15 intermetallic matrix composite reinforced with TiO2 nanoparticles[J].Intermetallics,2007,15(12):1595-1605.
• [10] Subramanian C.Some considerations towards the design of a wear resistant aluminium alloy[J].Wear,1992,155(1):193-205.
• [11] Esawi A M K,Morsi K,Sayed A,et al.Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium composites[J].Composites Science and Technology,2010,70(16):2237-2241.
• [12] Ozden S,Ekici R,Nair F.Investigation of impact behaviour of aluminium based SiC particle reinforced metal-matrix composites[J].Composites Part A:Applied Science and Manufacturing,2007,38(2):484-494.
• [13] Ahmad F,Lo S H J,Aslam M,et al.Tribology behaviour of alumina particles reinforced aluminium matrix composites and brake disc materials[J].Procedia Engineering,2013,68:674-680.
• [14] Mordyuk B N,Prokopenko G I,Milman Y V,et al.Wear assessment of composite surface layers in Al-6Mg alloy reinforced with AlCuFe quasicrystalline particles:Effects of particle size,microstructure and hardness[J].Wear,2014,319(1/2):84-95.
• [15] Inman I A,Datta P K,Du H L,et al.Studies of high temperature sliding wear of metallic dissimilar interfaces[J].Tribology International,2005,38(9):812-823.
• [16] 李洲，魏世忠，徐流杰，等.第二相强化钨合金的制备方法与性能综述[J].中国钨业，2022,37(3):56-69.LI Zhou,WEI Shi-zhong,XU Liu-jie,et al.Review of preparation methods and properties of second phase reinforced tungsten alloy[J].China Tungsten Industry,2022,37(3):56-69.
• [17] Bradt R C.Cr2O3 solid solution hardening of Al2O3[J].Journal of the American Ceramic Society,1967,50(1):54-55.
• [18] Millan A J,Nieto M I,Moreno R,et al.Thermogelling polysaccharides for aqueous gelcasting—part III:mechanical and microstructural characterization of green alumina bodies[J].Journal of the European Ceramic Society,2002,22(13):2223-2230.
• [19] Mangani G,Brillante A.Effect of the composition and sintering process on mechanical properties and residual stresses in zirconia-alumina composites[J].Journal of the European Ceramic Society,2005,25(15):3383-3392.
• [20] Mandal N,Doloi B,Mondal B.Development of flank wear prediction model of Zirconia Toughened Alumina (ZTA) cutting tool using response surface methodology[J].International Journal of Refractory Metals and Hard Materials,2011,29(2):273-280.
• [21] 周航.Al2O3颗粒增强Mo基复合材料的制备与组织性能研究[D].西安：西安理工大学，2015.ZHOU Hang.Prepartion microstructure and properties of mo matrix composites reinforced by Al2O3 particles[D].Xi’an:Xi’an University of Technology,2015.
• [22] Zhou H,Zhang Y,Hua X,et al.High-temperature anti-wear behavior of alumina-reinforced Ti-Zr-Mo alloy composites[J].Wear,2014,319(1/2):184-190.
• [23] Xu L,Wei S,Liu Q,et al.Microstructure and high-temperature frictional wear property of Mo-based composites reinforced by aluminum and lanthanum oxides[J].Tribology Transactions,2013,56(5):833-840.
• [24] 刘强.自生Al2O3增强稀土钼合金的制备及性能研究[D].洛阳：河南科技大学，2012.LIU Qiang.The Al2O3 reinforced rare earth molybdenum alloy and research on preparation of properties[D].Luoyang:Henan University of Science and Technology,2012.
• [25] Heuer A H.Transformation toughening in ZrO2-containing ceramics[J].Journal of the American Ceramic Society,1987,70(10):689-698.
• [26] 王恩泽，徐雁平，鲍崇高，等.Al2O3颗粒/耐热钢复合材料的制备及高温磨料磨损性能[J].复合材料学报，2004,21(1):56-60.WANG En-ze,XU Yan-ping,BAO Chong-gao,et al.Fabrication of Al2O3/heat-resistant steel composite and its wear-resistance at high temperature and abrasive[J].Acta Materiae Compositae Sinica,2004,21(1):56-60.
• [27] 邱集明，卢德宏，陈世敏，等.Al2O(3p)/20Cr25Ni20复合材料的高温磨损性能[J].特种铸造及有色合金，2014,34(8):874-877.QIU Ji-ming,LU De-hong,CHEN Shi-min,et al.Wear-resistance of Al2O(3p)/20Cr25Ni20 composites at high temperature[J].Special Casting & Nonferrous Alloys,2014,34(8):874-877.
• [28] 侯风亮，倪峰，崔延遂，等.Al2O3/Mo复合材料的磨料磨损性能[J].复合材料学报，2011,28(4):136-141.HOU Feng-liang,NI Feng,CUI Yan-sui,et al.Abrasive wear properties of Al2O3/Mo composite[J].Acta Materiae Compositae Sinica,2011,28(4):136-141.
• [29] 陆大伟，钱刚，凤仪，等.La2O3对铜基自润滑复合材料高温摩擦磨损性能的影响[J].润滑与密封，2021,46(1):51-58.LU Da-wei,QIAN Gang,FENG Yi,et al.Effect of La2O3 on high temperature friction and wear properties of copper-based self-lubricating composites[J].Lubrication Engineering,2021,46(1):51-58.
• [30] 黄本生，伍艳秋，陈灵芝，等.固溶处理对自润滑稀土复合涂层性能的影响[J].材料热处理学报，2023,44(9):169-177.HUANG Ben-sheng,WU Yan-qiu,CHEN Ling-zhi,et al.Effect of solution treatment on properties of self-lubricating rare earth composite coating[J].Transactions of Materials and Heat Treatment,2023,44(9):169-177.
• [31] 钱钰，李赛，崔功军，等.纳米ZrO2增强CoCrW基复合材料的制备及高温摩擦学性能研究[J].润滑与密封，2021,46(9):40-46.QIAN Yu,LI Sai,CUI Gong-jun,et al.Preparation and high-temperature tribological properties of nano-ZrO2 reinforced CoCrW matrix composites[J].Lubrication Engineering,2021,46(9):40-46.
• [32] Hornbogen E.The role of fracture toughness in the wear of metals[J].Wear,1975,33(2):251-259.
• [33] Pauschitz A,Roy M,Franek F.Mechanisms of sliding wear of metals and alloys at elevated temperatures[J].Tribology International,2008,41(7):584-602.
• [34] Zhu S,Bi Q,Niu M,et al.Tribological behavior of NiAl matrix composites with addition of oxides at high temperatures[J].Wear,2012,274-275:423-434.
• [35] Lin J S,Hao Y C,Luo L M,et al.Microstructure and performances of W-TiC-Y2O3 composites prepared by mechano-chemical and wet-chemical methods[J].Journal of Alloys and Compounds,2018,732:871-879.
• [36] Li X,Feng Y,Liu B,et al.Influence of NbC particles on microstructure and mechanical properties of AlCoCrFeNi high-entropy alloy coatings prepared by laser cladding[J].Journal of Alloys and Compounds,2019,788:485-494.
• [37] Liu H,Liu J,Chen P,et al.Microstructure and high temperature wear behaviour of in-situ TiC reinforced AlCoCrFeNi-based high-entropy alloy composite coatings fabricated by laser cladding[J].Optics & Laser Technology,2019,118:140-150.
• [38] Peng Y B,Zhang W,Li T C,et al.Microstructures and mechanical properties of FeCoCrNi high entropy alloy/WC reinforcing particles composite coatings prepared by laser cladding and plasma cladding[J].International Journal of Refractory Metals and Hard Materials,2019,84:105044.
• [39] 刘侠，薛召露，丁毅，等.SiC添加相对NiCr-Cr3C2金属陶瓷涂层高温磨损性能的影响[J].热喷涂技术，2020,12(3):60-69.LIU Xia,XUE Zhao-lu,DING Yi,et al.Effect of SiC on high temperature wear properties of NiCr-Cr3C2 metal ceramic coatings[J].Thermal Spray Technology,2020,12(3):60-69.
• [40] Yang G,He S,Qin L Y,et al.Microstructure and wear resistance of WC particles reinforced titanium matrix composite coating[J].Applied Laser,2013,33(4):365-369.
• [41] Liu H X,Zhang X W,Wang C Q,et al.Microstructures and high-temperature wear behaviors of Co/TiC laser coatings on die steel[J].Optics and Precision Engineering,2013,21(8):2048-2055.
• [42] Zhang X,Ma J,Fu L,et al.High temperature wear resistance of Fe-28Al-5Cr alloy and its composites reinforced by TiC[J].Tribology International,2013,61:48-55.
• [43] Lu C,Chen Z,Yan Y,et al.Enhanced high-temperature wear performance of H13 steel through TiC incorporation by laser metal deposition[J].Materials (Basel),2022,16(1):99.
• [44] Ding H,Liu T,Wei J,et al.Microstructure and tempering softening mechanism of modified H13 steel with the addition of tungsten,molybdenum,and lowering of chromium[J].Materials & Design,2022,224:111317.
• [45] Ji Y S,Chun X W,Wan J L,et al.Tempering stability of Fe-Cr-Mo-W-V hot forging die steels[J].International Journal of Minerals,Metallurgy,and Materials,2017,24(10):1145-1157.
• [46] Wang Z,Zhou M,Jiang Y,et al.Effects of in situ NbC on the microstructure and high-temperature friction wear properties of 4Cr5MoSiV1 steel[J].Journal of Materials Research and Technology,2023,24:6159-6173.
• [47] Zhan Y,Zhang G.The role of graphite particles in the high-temperature wear of copper hybrid composites against steel[J].Materials & Design,2006,27(1):79-84.
• [48] 赵立新.TiCx、TiCx-TiB2颗粒增强钢基复合材料高温磨损性能[D].长春：吉林大学，2010.ZHAO Li-xin.High temperature wear properties of the TiCx、TiCx-TiB2 particulate reinforced steel matrix composites[D].Changchun:Jilin University,2010.
• [49] Huang Z,Zhai H,Guan M,et al.Oxide-film-dependent tribological behaviors of Ti3SiC2[J].Wear,2007,262(9/10):1079-1085.
• [50] Sun T,Wang Q,Sun D L,et al.Study on dry sliding friction and wear properties of Ti2AlN/TiAl composite[J].Wear,2010,268(5/6):693-699.
• [51] Cheng J,Zhu S,Yu Y,et al.Microstructure,mechanical and tribological properties of TiAl-based composites reinforced with high volume fraction of nearly network Ti2AlC particulates[J].Journal of Materials Science & Technology,2018,34(4):670-678.
• [52] Yan H,Liu K,Zhang P,et al.Fabrication and tribological behaviors of Ti3SiC2/Ti5Si3/TiC/Ni-based composite coatings by laser cladding for self-lubricating applications[J].Optics & Laser Technology,2020,126:106077.
• [53] Xu Z,Zhang Q,Shi X,et al.Tribological properties of TiAl matrix self-lubricating composites containing multilayer graphene and Ti3SiC2 at high temperatures[J].Tribology Transactions,2015,58(6):1131-1141.
• [54] Zhang X,Sun X,Wang Y,et al.Tribological behavior of WC-Al2O3-graphene composite at different temperatures[J].International Journal of Smart and Nano Materials,2022,13(4):691-712.
• [55] Zhai W,Shi X,Wang M,et al.Grain refinement:A mechanism for graphene nanoplatelets to reduce friction and wear of Ni3Al matrix self-lubricating composites[J].Wear,2014,310(1/2):33-40.
• [56] Xu L,Wei S,Li J,et al.Preparation,microstructure and properties of molybdenum alloys reinforced by in-situ Al2O3 particles[J].International Journal of Refractory Metals and Hard Materials,2012,30(1):208-212.
• [57] Cui C P,Zhu X W,Liu S L,et al.Effect of nano-sized ZrO2 on the recrystallization of Mo alloy[J].Journal of Alloys and Compounds,2018,752:308-316.
• [58] Shao Y,Liu Y,Wu D,et al.Properties of TiC-reinforced Cu-W alloys prepared by wire arc additive manufacturing[J].International Journal of Refractory Metals and Hard Materials,2023,115:106315.
• [59] Yu P C,Liu X B,Lu X L,et al.Tribology and high-temperature oxidation behaviors of NiCrBSiFe composite coatings on Ti6Al4V alloy by laser cladding[J].Research Scientific Communications Advances,2015,5(93):76516-76525.
• [60] Hua N,Chen W,Wang Q,et al.Tribocorrosion behaviors of a biodegradable Mg65Zn30Ca5 bulk metallic glass for potential biomedical implant applications[J].Journal of Alloys and Compounds,2018,745:111-120.
• [61] Liao Z,Hua N,Chen W,et al.Correlations between the wear resistance and properties of bulk metallic glasses[J].Intermetallics,2018,93:290-298.
• [62] Hua N,Chen W,Wang W,et al.Tribological behavior of a Ni-free Zr-based bulk metallic glass with potential for biomedical applications[J].Materials Science and Engineering C,2016,66:268-277.

文章评论(Comment)：