张新明,刘文军,刘胜胆,钟奇鸣

• 1:中南大学材料科学与工程学院

摘要(Abstract)：

通过光学显微镜、扫描电镜及透射电镜研究了热轧工艺对7050铝合金慢速率淬火过程的组织演变规律,并结合电导率及力学性能结果分析了热轧变形参数对合金淬火敏感性的影响。结果表明:变形程度越大合金表现出更差的淬火敏感性,这是因为轧制工艺不同将导致合金再结晶百分数差异,进而对合金淬火敏感性产生影响,根本原因是再结晶晶粒中的Al3Zr粒子作为平衡η相的形核位置将加快合金过饱和固溶体的分解,导致合金后续时效强化效果降低,合金性能损失;合金热处理过程中在保证力学性能的前提下,适当控制轧制变形量可减小再结晶分数,改善合金淬火敏感性。

关键词(KeyWords)： 7050铝合金;淬火敏感性;再结晶;热轧变形量

Abstract:

Keywords:

基金项目(Foundation): 国家重点基础研究发展规划(973计划)(2005CB623700)

作者(Author): 张新明,刘文军,刘胜胆,钟奇鸣

DOI: 10.13289/j.issn.1009-6264.2010.06.019

参考文献(References)：

• [1]Starke E A,Staley J T.Application of modern aluminum alloys to aircraft[J].Progress in Aerospace Sciences,1996,32(2-3):131-172.
• [2]Campbell F C.Aluminum[M].Elsevier Science,2006:15-92.
• [3]王祝堂,田荣璋.铝合金及其加工手册[M].长沙:中南工业大学出版社,1989.
• [4]肖亚庆.铝加工技术实用手册[M].北京:冶金工业出版社,2005.
• [5]Williams J C,Starke E A.Progress in structural materials for aerospace systems[J].Acta Materialia,2003,51(19):5775-5799.
• [6]Buha J,Lumley R N,Crosky A G.Secondary ageing in an aluminium alloy 7050[J].Materials Science and Engineering A,2008,492(1-2):1-10.
• [7]Wang F,Xiong B,Zhang Y,et al.Effect of heat treatment on the microstructure and mechanical properties of the spray-deposited Al-10.8Zn-2.8Mg-1.9Cu alloy[J].Materials Science and Engineering A,2008,486(1-2):648-652.
• [8]Thompson D S,Subramanya B S,Levy S A.Quench rate effects in Al-Zn-Mg-Cu alloys[J].Metallurgical Transactions,1971,2(4):1149-1160.
• [9]Conserva M,Di R E,Caloni O.Comparison of the influence of chromium and zirconium on the quench sensitivity of Al-Zn-Mg-Cu alloys[J].Metallurgical Transactions,1971,2(4):1227-1232.
• [10]Conserva M,Fiorini P.Interpretation of quench-sensitivity in Al-Zn-Mg-Cu alloys[J].Metallurgical Transactions,1973,4(3):857-862.
• [11]Deschamps A,Br Y.Nature and distribution of quench-induced precipitation in an Al-Zn-Mg-Cu alloy[J].Scripta Materialia,1998,39(11):1517-1522.
• [12]Deschamps A,Br Y.Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr)alloy[J].Materials Science and Engineering A,1998,251(1-2):200-207.
• [13]Kikuchi S,Yamazaki H,Otsuka T.Peripheral-recrystallized structures formed in Al-Zn-Mg-Cu-Zr alloy materials during extrusion and theirquenching sensitivity[J].Journal of Materials Processing Technology,1993,38(4):689-701.
• [14]Tanner D A,Robinson J S.Effect of precipitation during quenching on the mechanical properties of the aluminium alloy 7010 in the W-temper[J].Journal of Materials Processing Technology,2004,153-154:998-1004.
• [15]Liu S D,Zhang X M,Chen M A.Effect of Zr content on quench sensitivity of AlZnMgCu alloys[J].Transactions of Nonferrous Metals Society of China,2007,17(4):787-792.
• [16]Robson J D,Prangnell P B.Dispersoid precipitation and process modelling in zirconium containing commercial aluminium alloys[J].Acta Materialia,2001,49(4):599-613.
• [17]Robson J D.Optimizing the homogenization of zirconium containing commercial aluminium alloys using a novel process model[J].Materials Science and Engineering A,2002,338(1-2):219-229.

文章评论(Comment)：