基于马氏体温变形的高锰TRIP钢组织演变Microstructure of high manganese TRIP steel based on warm deformation of martensite
郭志凯,李龙飞,杨王玥,孙祖庆
摘要(Abstract):
通过热模拟压缩和两相区退火实验,结合SEM、XRD方法,研究基于马氏体温变形的高锰TRIP钢制备过程的组织演变,并分析了变形工艺和退火工艺对组织演变的影响。结果表明:高锰TRIP钢温变形促进马氏体分解及铁素体动态再结晶的发生,两相区变形过程中可以形成奥氏体,同时渗碳体粒子溶解。随后两相区退火时,铁素体通过再结晶完成等轴化,奥氏体持续形成的同时渗碳体粒子逐渐溶解。通过高锰TRIP钢马氏体温变形加两相区退火工艺,可以在较小应变量和较短退火时间条件下获得由亚微米尺度的铁素体基体、马氏体和残留奥氏体组成的复相组织。
关键词(KeyWords): 高锰TRIP钢;马氏体;温变形;两相区退火;残留奥氏体
基金项目(Foundation): 国家重点基础研究发展计划资助(2010CB63081);; 新金属材料国家重点实验室自主课题(2011Z-04)
作者(Author): 郭志凯,李龙飞,杨王玥,孙祖庆
DOI: 10.13289/j.issn.1009-6264.2014.10.025
参考文献(References):
- [1]董瀚,曹文全,时捷,等.第3代汽车钢的组织与性能调控技术[J].钢铁,2011,46(6):1-11.DONG Han,CAO Wen-quan,SHI Jie,et al.Microstructure and performance control technology of the 3rd generation auto sheet steels[J].Iron and Steel,2011,46(6):1-11.
- [2]Hayashi H,Nakagawa T.Recent trends in sheet metals and their formability in manufacturing automotive panels[J].Journal of Materials Processing Technology,1994,46(3-4):455-487.
- [3]Sugimoto K,Iida T,Sakaguchi J,et al.Retained austenite characteristics and tensile properties in a TRIP type bainitic sheet steel[J].ISIJ International,2000,40(9):902-908.
- [4]Matlock D K,Speer J G.Third generation of AHSS:microstructure design concept[C]∥In:Haldar A,Suwas S,Bhattacharjee D,eds.Microstructure and texture in steels,London:Springer,2009:185-205.
- [5]Aydin H,Essadiqi E,Jung I H,et al.Development of 3rd generation AHSS with medium Mn content alloying compositions[J].Materials Science and Engineering A,2013,564:501-508.
- [6]De Moor E,Gibbs P J,Speer J G,et al.Strategies for third-generation advanced high-strength steel development[J].AIST Transactions,2010,7(3):132-144.
- [7]尹云洋,杨王玥,李建成,等.基于动态相变热轧C-Mn-Si系TRIP钢的组织及性能[J].材料热处理学报,2009,30(3):84-88.YIN Yun-yang,YANG Wang-yue,LI Jian-cheng,et al.Microstructure and mechanical properties of hot rolled C-Mn-Si TRIP steel based on dynamic transformation[J].Transactions of Materials and Heat Treatment,2009,30(3):84-88.
- [8]尹云洋,杨王玥,李龙飞,等.基于动态相变的热轧TRIP钢组织及性能研究[J].金属学报,2008,44(11):1299-1304.YIN Yun-yang,YANG Wang-yue,LI Long-fei,et al.Microstructure and mechanical properties of hot rolled C-Mn-(Al)-Si TRIP steels based on dynamic transformation of undercooled austenite[J].Acta Metallurgica Sinica,2008,44(11):1299-1304.
- [9]Lee S,Lee S J,De Cooman B C.Austenite stability of ultrafine-grained transformation-induced plasticity steel with Mn partitioning[J].Scripta Materialia,2011,65(3):225-228.
- [10]De Cooman B C,Gibbs P J,Lee S,et al.Transmission electron microscopy analysis of yielding in ultrafine-grained medium Mn transformation-induced plasticity steel[J].Metallurgical and Materials Transactions A,2013,44(6):2563-2572.
- [11]Lee S,Lee K,De Cooman B C.Ultra fine-grained 6wt%manganese TRIP steel[J].Materials Science Forum,2010,654-656:286-289.
- [12]Lee S,Lee S J,Kumar S S,et al.Localized deformation in multiphase,ultra-fine-grained 6 pct Mn transformation-induced plasticity steel[J].Metallurgical and Materials Transactions A,2011,42(12):3638-3651.
- [13]Miller R L.Ultrafine-grained microstructure and mechanical properties of alloy steels[J].Metallurgical Transactions,1972,3(4):905-912.
- [14]Gibbs P J,De Moor E,Merwin M J,et al.Austenite stability effects on tensile behavior of manganese-enriched-austenite transformation-induced plasticity steel[J].Metallurgical and Materials Transactions A,2011,42(12):3691-3702.
- [15]Miller R L.A rapid x-ray method for the determination of retained austenite[J].Transactions of the ASM,1964,57:892-899.
- [16]Najafi-Zadeh A,Jonas J J,Yue S.Grain refinement by dynamic recrystallization during the simulated warm-rolling of interstitial free steels[J].Metallurgical Transactions A,1992,23(9):2607-2617.
- [17]李龙飞,杨王玥,孙祖庆.低碳钢在Ac1点以下温度变形时的铁素体动态再结晶[J].金属学报,2003,39(4):419-425.LI Long-fei,YANG Wang-yue,SUN Zu-qing.Dynamic recrystallization of ferrite during deformation at temperatures below Ac1in a low carbon steel[J].Acta Metallurgica Sinica,2003,39(4):419-425.
- [18]李龙飞,杨王玥,孙祖庆.Mn含量对低碳钢中铁素体动态再结晶的影响[J].金属学报,2004,40(12):1257-1263.LI Long-fei,YANG Wang-yue,SUN Zu-qing.Influence of Mn content on dynamic recrystallization of ferrite in low carbon steels[J].Acta Metallurgica Sinica,2004,40(12):1257-1263.
文章评论(Comment):
|
||||||||||||||||||
|
||||||||||||||||||