曹光明,李成刚,张元祥,李志峰,王福祥,刘振宇

• 1:东北大学轧制技术与连轧自动化国家重点实验室

摘要(Abstract)：

采用热重法研究了中铬铁素体不锈钢的高温氧化行为,测定出不同温度条件下的氧化增重曲线,其氧化增重符合抛物线规律,由于溶质铬元素的选择性氧化形成致密的氧化层阻碍离子扩散造成实验钢的氧化激活能较高为560 k J/mol。通过氧化铁皮表面形貌观察,在氧化铁皮表面生成部分异常长大的突起铁-铬尖晶石相,并随着氧化温度升高,有增多和长大趋势。当氧化温度为1100℃时,氧化铁皮出现了分层,氧化铁皮最外层为富铁的氧化物(Fe O和Fe3O4为主),将突起铁-铬尖晶石相包裹住。结合热轧粘辊实验结果表明,突起的铁-铬尖晶石容易划伤轧辊表面形成裂纹源,在后续循环轧制过程中急剧的冷热循环和轧制变形,促进了裂纹形成和扩展,为热轧粘辊提供了形核地点。高温轧制促进表面富铁的氧化物的生成,消除突起铁-铬尖晶石相可有效的降低热轧粘辊。

关键词(KeyWords)： 热轧;高温氧化;氧化激活能;粘辊

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金(51204047);; 国家科技支撑计划课题(2011BAE13B04);; 中央高校基本科研业务费项目(N130407004)

作者(Author): 曹光明,李成刚,张元祥,李志峰,王福祥,刘振宇

DOI: 10.13289/j.issn.1009-6264.2015.10.016

参考文献(References)：

• [1]童丽华,李春福.超纯铁素体不锈钢及其抗应力腐蚀研究进展[J].金属热处理,2014,35(9):137-131.TONG Li-hua,LI Chun-fu.Research progress of ultra pure ferrite stainless steel and its stress corrosion resistance[J].Heat Treatment of Metals,2014,35(9):137-131.
• [2]Ishii K,Ishii T,Ota H.Ni-and Mo-free ferritic stainless steel with high corrosion resistance,JFE443CT[J].JFE Technical Report,2008,(12):39-44.
• [3]El-Kashif E,Asakura K,Koseki T,et al.Effects of boron,niobium and titanium on grain growth in ultra high purity 18%Cr ferritic stainless steel[J].ISIJ International,2004,44(9):1568-1575.
• [4]Lo K H,Shek C H,Lai J K L.Recent developments in stainless steels[J].Materials Science and Engineering:R,2009,65(4/6):39-104.
• [5]师昌绪,陆达,荣科.中国高温合金40年[J].金属学报,1997,33(1):1-8.SHI Chang-xu,LU Da,RONG Ke.The development of China on superalloy during 40 years[J].Acta Metallurgica Sinica1997,33(1):1-8.
• [6]王明家,信瑞山,龙珊珊,等.固溶态316LN不锈钢的氧化行为[J].材料热处理学报,2012,33(8):74-78.WANG Ming-jia,XIN Rui-shan,LONG Shan-shan,etal.Oxidation behavior of 316LN stainless steel at solution state[J].Transactions of Meterials and Heat Treatment,2012,33(8):74-78.
• [7]Yamauchi A,Kurokawa K,Takahashi H,et al.High temperature oxidation of SUS430 in H2O-containing atmospheres at 1473 K[J].J Japan Inst Metals,2000,64(5):359-362.
• [8]郭立峰,魏彦筱,张晓昱,等.18~8奥氏体不锈钢水蒸气氧化的失效分析[J].华北电力技术,2005(8):21-23.GUO Li-feng,WEI Yan-xiao,ZHANG Xiao-yu,et al.Analysis on 18-8 austenitic stainless steel failure caused by steam oxidation[J].North China Electric Power,2005(8):21-23.
• [9]张丽,李鑫,郑宏光.国外铁素体不锈钢黏辊行为试验研究进展[J].世界钢铁,2009(6):39-46.ZHANG Li,LI Xin,ZHENG Hong-guang.Progress of overseas research on sticking in ferritic stainless[J].Steel World Iron&Steel 2009(6):39-46.
• [10]Jin W,Choi J Y,Lee Y Y.Effect of roll and rolling temperatures on sticking behavior of ferritic stainless steels[J].ISIJ International,1998,38(7):739-743.
• [11]Sunghak L,Dongwoo S,Seungchan O,et al.Sticking mechanism during hot rolling of two stainlesssteels[J].Metallurgical and Materials Transactions A,1998,29(2):696-702.
• [12]Son C Y,Kim C K,Ha D J,et al.Mechanisms of sticking phenomenon occurring during hot rolling of two ferritic stainless steels[J].Metallurgical and Materials Transactions A,2007,38(9):2776-2787.
• [13]Ha D,Lee J,Kim N,et al.Effects of alloying elements on high-temperature oxidation and sticking occurring during hot rolling of modified ferritic STS430J1L stainless steels[J].Metallurgical and Materials Transactions A,2012,43(1):74-86.
• [14]Young D J.High Temperature Oxidation and Corrosion of Metals[M].London:Access Online via Elsevier,2008.
• [15]Kofstad P.Low-pressure oxidation of tantalum at 1300~1800℃[J].Journal of the Less Common Metala,1964,7(4):241-266.
• [16]Neil Berks,Gerale H Meier,Fred S Pettit.Introduction to the High-Temperature Oxidation of Metals[M].2nd ed.Cambridge,UK:Cambridge University Press,2006.
• [17]张驰,刘振宇,王国栋.超纯21%Cr铁素体不锈钢的热变形行为研究[J].钢铁研究学报,2010,22(12):27-32.ZHANG Chi,LIU Zhen-yu,WANG Guo-dong.Study on hot deformation behavior of an ultra purified 21%Cr ferritic stainless Steel[J].Journal of Iron and Steel Research,2010,22(12):27-32.

文章评论(Comment)：